I. Contents of safety production knowledge training 1

Intrinsic safety makes the production equipment or production system itself safe by design, and will not cause accidents even in the case of misoperation or failure. Safety management is a series of legal measures to protect the safety and health of workers in the production process, improve working conditions, prevent industrial accidents and occupational hazards, realize the combination of work and rest, strengthen safety production, and enable workers to carry out production safely and smoothly.

In the process of operation, we should strictly abide by the safety production rules and regulations and operating procedures of our unit, obey management, wear and use labor protection articles correctly, receive safety production education and training, master the safety production knowledge required by our own work, improve safety production skills, and enhance the ability of accident prevention and emergency treatment.

Regular safety inspection is mainly organized by the person in charge of the company or workshop, and the joint safety inspection composed of production department, administration department, workshop director, team leader and team safety officer is once a month in principle. First, determine the inspection time and scope, and formulate inspection standards.

Second, the content of safety production knowledge training 2

I. Use of dry powder and carbon dioxide (portable) fire extinguishers

Take out the fire extinguisher and unplug the safety bolt. Hold the nozzle. Press the knob (handle) hard. Direct injection of combustion products.

Pay attention when using, don't be confused by smoke, and spray as close as possible to the combustion products for about 5 meters. Stand outside in the windward direction. Before use, turn the fire extinguisher upside down several times to loosen the dry powder in the cylinder. The carbon dioxide fire extinguisher can be repeatedly sprayed (ignited) by pressing the handle. It is necessary to know the possible spraying time in advance.

Second, the use of indoor fire hydrant

Press the electrical switch, start the fire pump, open the fire hydrant valve, and pull (deploy) the fire hose to drain water. Pay attention to the operation, and choose the fire hydrant (near the fire). Press the fire pump button to start the fire pump. Open the fire box door. Pull out and lay the hose without bending or twisting. Open the fire hydrant valve completely and put out the water.

Third, how to report the fire?

The telephone number of the fire alarm is 1 19. After the fire broke out, the on-site personnel should immediately call the fire alarm number 1 19 with their mobile phones or the nearest telephone. When reporting a fire, the alarm person should speak clearly and comprehensively, explaining the specific location and orientation of the fire. After calling the police, send someone to the intersection to meet the fire truck.

If there are casualties in the fire, you should also call "1 19" ambulance after reporting the fire alarm. At the same time, in addition to reporting the danger to the superior leaders in time, the on-site personnel should also cut off the power supply in time, evacuate personnel, and actively organize personnel to use on-site fire-fighting equipment to extinguish the fire.

Three. Safety production knowledge training content 3

Team safety management, implement the policy of "safety first, prevention first", team leaders should resolutely implement the policy of "safety first, prevention first", adhere to the principle of "managing production must manage safety", and organize production in security team. It is necessary to seriously organize employees to study the policies, laws and regulations of national production safety and the rules and regulations of enterprise production safety, and resist all kinds of illegal command and operation.

Implementing the production responsibility system of the safety team and the production responsibility system of the safety team is an important guarantee for the normal production of the team and the safety and health of the employees. Team leaders should strictly implement the enterprise responsibility system for production safety, inspect and supervise the implementation of team members, so that the production responsibility of security team can be implemented to all people, leaving no dead ends.

To improve the safety quality of team members, the team leader should organize team members to learn safety technical knowledge, safety operation norms, procedures and systems, and constantly enhance safety awareness and self-protection ability.

Regular safety inspection, mainly organized by the company or workshop supervisor, members of the leading group for safety production, and the joint safety inspection composed of the production department, administration department, workshop director, team leader and team safety officer, is once a month in principle.

First of all, we must determine the inspection time and scope and formulate inspection standards. For potential safety hazards or other problems found in the inspection, a rectification notice shall be issued immediately, and the responsible persons of relevant departments shall be instructed to carry out rectification. If an accident is caused by ineffective rectification or failure to rectify hidden dangers in time, the responsibility of relevant personnel shall be investigated. It should be emphasized that every employee of the team has the right to stop anyone's illegal operation in the production process.

Four, the content of safety production knowledge training 4

Safety training mainly involves three aspects: management personnel training, staff training and daily safety education. The training content corresponding to each aspect is roughly as follows:

1, management training:

(1) National production safety guidelines, laws, regulations and standards.

(2) Rules and regulations of enterprise safety production and responsibilities.

(3) Safety management, safety technology, occupational health and other knowledge.

(4) Relevant accident cases and emergency management.

2. Staff training:

(1) Learn the necessary knowledge about safety in production.

(2) Be familiar with relevant safety production rules and regulations and safety operation procedures.

(3) Master the safe operation skills of this position.

3, daily safety education:

(1) Learn the laws and regulations of the state and the government on safety in production.

(2) Learn safety production documents, safety announcements, safety production rules and regulations, safety operation procedures and safety production knowledge.

(3) Discuss and analyze typical accident cases, and summarize and draw lessons from the accident.

(4) Training on fire prevention, explosion prevention, poisoning prevention and self-protection, emergency handling of abnormal situations and emergency plan drills.

(5) to carry out on-the-job technical training and competition activities.

(6) to carry out hidden dangers investigation and anti-habitual illegal activities.

Verb (abbreviation of verb) Content of safety production knowledge training 5

"Three-level" safety education, new employees first receive "three-level" education, including factory education, workshop education and team education. It is required that the "level 3" safety education time should not be less than 40 hours, and they can only take up their posts after passing the examination.

In-factory education is to educate new employees about safety production situation, safety documents, rules and regulations, special dangerous places in enterprises, general safety technical knowledge, main causes of casualty accidents, accident lessons, etc. before they are assigned to workshops or jobs, and explain the importance of safety production from both positive and negative aspects, so that new employees can receive preliminary education on safety production.

Safety responsibility education, "everyone is responsible for safety production", is an important principle to do a good job in safety production. In order to do a good job in safety and prevent industrial accidents, new employees should be educated in various rules and regulations, technological procedures, safety operation procedures and post safety responsibilities. Combined with relevant examples, make new employees realize that these rules, systems and disciplines are indispensable to ensure safe production.

Safety awareness education, safety is priceless, which is the true meaning of life drawn from countless blood lessons. "Safe production means benefit, stability, health, happiness, image and development".

Intransitive Verb Safety Production Knowledge Training Content 6

1, aerial work

Where the work is carried out at a height of more than 2 meters (including 2 meters) from the falling height datum, it is called aerial work.

2. Minimum landing point

The lowest point that may fall in the working position is called the lowest landing point. Anyone who climbs more than 2 meters must wear a seat belt. Seat belts are protective articles for aerial workers to prevent falling casualties. They are composed of belts, rope loops and metal fittings, collectively referred to as seat belts.

3, the use and inspection of seat belts

Seat belts should be hung high and used low, and attention should be paid to prevent swinging collision.

4, aerial work safety specification (four must, two strict)

(1) Safety tickets must be obtained for high-altitude operations, scaffolding must be fastened, and safety requirements must be met. Safety helmet and safety belt must be worn, and a special person is responsible for supervision.

(2) When climbing upwards, you are not allowed to pull an unfixed object, and you are not allowed to throw things on the ground from a height at will.