Stone;
(2) the right to make suggestions, that is, the right to make suggestions on the safety production work of the unit;
(1, the concept of "three-level" safety education for new employees: Three-level safety education refers to the education for new employees at the factory level, workshop (grass-roots) level and team level.
2. The rights and obligations of employees stipulated in the Safety Production Law
Eight rights:
(1) The right to know, that is, the right to know the risk factors, preventive measures and emergency measures existing in workplaces and posts; 3) the right to criticize, report and accuse, that is, the right to criticize, report and accuse the problems existing in the safety production management of the unit;
(four) the right to refuse, that is, the right to refuse illegal command and force risky operations;
(5) Emergency avoidance right, that is, the right to stop operation or evacuate the workplace after taking possible emergency measures when an emergency that directly endangers personal safety is discovered;
(6) the right of the unit to claim compensation according to law;
Four obligations:
(1) Self-discipline obligation, that is, employees should abide by the safety production rules and regulations and operating procedures of their own units and obey management;
(2) Wear and use labor protection articles correctly;
(three) the obligation to consciously learn the knowledge of safety in production requires mastering the knowledge of safety in production required by the post, improving the skills of safety in production and enhancing the ability of accident prevention and emergency handling;
(4) hidden danger reporting obligation, that is, when hidden dangers of accidents or other unsafe factors are discovered, they shall immediately report to the on-site safety production management personnel or the person in charge of the unit.
3. The principle of "four don't let go" in accident handling: the cause of the accident has not been ascertained, the responsible person has not been dealt with, the rectification measures have not been implemented, and the relevant personnel have not been educated.
4. The principle of "three violations": illegal command, illegal operation and violation of labor discipline.
5. "Three simultaneities" system: refers to the newly built, rebuilt and expanded construction projects, whose safety, environmental protection and occupational health facilities must be designed, constructed and put into use at the same time as the main project.
6. "Three basics" principle: be familiar with basic work, obey basic management and be proficient in basic operation.
7. The principle of "eight precautions" in rainy season: heatstroke prevention and cooling, lightning protection and electric shock prevention, object attack prevention, drowning prevention, traffic accident prevention, flood prevention, collapse prevention and poisoning prevention.
8. Six prevention principles in winter: anti-freezing, anti-skid, fire prevention, explosion prevention, poisoning prevention and mechanical injury prevention.
9. The principle of "Four Harms": Do not hurt yourself, others, others and protect others from harm.
10, "four concessions" means that when profit, output, schedule and cost conflict with HSE (Health, Safety and Environment Management System), HSE work must be given concessions.
165438+
12. In case of fire, call "1 19" in time and send someone to the intersection to meet the fire truck. Pay attention to the following points when making a phone call: (1) Make clear the detailed address and specific fire location of the fire unit; (2) the nature of the substance burned by the fire unit, such as oil, electrical appliances or cotton fabric; (3) the size of the fire; (4) The name and contact information of the alarm person.
13. The "three" causes of the accident: unsafe behavior of people, unsafe state of things and management defects.
14. The national classification of accidents includes: particularly serious accidents, serious accidents, serious accidents and general accidents.
15, civil gas safety "three first, three later, eight not allowed": first ignite, then turn on the gas, first put out the fire, then go out, first check and then rest; No ignition without a stove, no indoor contact with flammable materials, no ignition without a special person, no leakage of pipes, stoves and doors, no ignition of gas pipeline valves at will, no ignition in sleep, no replacement or expansion of burners, and no baking of flammable materials.
Second, the basic knowledge of work-related injury identification
Workers in any of the following circumstances shall be recognized as work-related injuries:
(1) is injured by an accident during working hours and workplace;
(two) before and after working hours in the workplace to engage in work-related preparatory work or finishing work was injured by an accident;
(3) Accidental injuries such as violence are caused during working hours and workplaces due to the performance of work duties;
(4) Suffering from occupational diseases;
(five) when going out to work, he is injured or his whereabouts are unknown due to work reasons;
Workers in any of the following circumstances shall be recognized as work-related injuries:
(1) died of sudden illness or died within 48 hours after being rescued;
(2) Being injured in activities such as emergency rescue and disaster relief to safeguard national interests and public interests;
(3) Employees who were disabled in the army because of war or work have obtained revolutionary disabled servicemen's certificates, and their old injuries have recurred after going to the employing unit.
In any of the following circumstances, it shall not be recognized as a work-related injury or regarded as a work-related injury:
(1) Intentional crime;
(2) Being drunk or taking drugs;
(3) Self-mutilation or suicide.
Three. Key points of HSE work of the company
I. Guiding ideology
Adhere to the policy of "safety first, prevention first, comprehensive treatment" and the consciousness and concept of "safety above all else, life is the most precious", and strive to provide solid safety guarantee for the establishment of a world-class engineering company.
Second, the work objectives
The overall goal of the work is to avoid personal casualty accidents, quality accidents, fire and explosion accidents, environmental pollution and public safety accidents.
The specific objectives are:
(1) Safety in production
1. No general or above accidents occurred;
2. The number of employees (including contractors) who died in the accident is zero;
3. The accidental injury rate of employees shall not exceed 0.07 ‰;
4. The qualified rate of special equipment inspection and the certified rate of special operation personnel training are100%;
5. The arrival rate of "three-level" safety education for new employees and safety education for those who have changed jobs 100%.
(2) Environmental protection
1. No environmental pollution and ecological environment damage accidents;
2. The compliance rate of discharged wastewater is100%;
3. The reasonable disposal rate of hazardous waste is 100%.
(3) Occupational health
1. No acute occupational hazards occurred;
2. Occupational health examination rate of employees100%;
3. The detection rate of occupational hazards in the workplace is100%;
4. The notification rate of occupational disease hazard contracts and the setting rate of warning signs are 100%.
(D) the "three simultaneities" management of construction projects
The HSE "three simultaneities" implementation rate of new, modified and expanded projects is 100%.
Three, strengthen the occupational health and safety education and training and publicity and education.
Effectively organize and carry out the "three studies" activities. Take "learning regulations for management cadres, learning standards for technicians and learning regulations for operators" as the content of daily post training, focusing on newly promulgated laws and regulations, changes in standards and regulations, standardized operating procedures and accident warning cases.
Fourth, strengthen the investigation and management of hidden dangers.
1. Strengthen the implementation of hidden danger investigation responsibility. In accordance with the relevant requirements of the State Administration of Work Safety and the higher authorities, the main responsibility for the investigation, management and prevention of hidden dangers shall be implemented. Ensure that the investigation and management of hidden dangers are "clear tasks, responsibility to people, timely investigation, effective governance, strengthened supervision and standardized management". According to the hidden danger level, improve the hidden danger information file, implement the accident hidden danger registration and reporting system, do a good job in organizing and running the hidden danger control project, and ensure that the hidden danger control project is completed on time and with good quality.
2. Strengthen equipment testing. Seriously organize and carry out special equipment inspection, on-site electrical safety inspection, lightning protection inspection and occupational health inspection. , timely discover and eliminate the inherent safety hazards of the equipment.
3. Ensure safe production investment. In order to eliminate hidden dangers, the Administrative Measures for the Extraction and Use of Enterprise Safety Production Expenses shall be strictly implemented, and a safety production input mechanism of "standardized extraction, scientific management and rational use" shall be established. Establish safety production expense management regulations as required, fully extract them according to the proportion of 2.5%, and incorporate them into the company's annual financial budget to standardize management and use, so as to achieve special account accounting and earmarking.
The above are collected and sorted by Zhong Da Consulting Company.
For more information about project/service/procurement bidding, and to improve the winning rate, please click on the bottom of official website Customer Service for free consultation:/#/? source=bdzd