Safety production self-inspection and self-correction report. The work has come to an end, and many people will ask to write a self-inspection report, sum up the work, find problems and deal with them in time. This is a self-inspection and self-correction report. Let's share the self-inspection and self-correction report of safety production work.
Report on self-inspection and self-correction of production safety 1 In order to do a good job in production safety, conscientiously implement the spirit of the special rectification meeting of production safety in the whole city, intensify the investigation and rectification of hidden dangers, and prevent the occurrence of production safety accidents, our factory has carried out safety inspections on two subordinate workshops, and now we report the inspection and rectification as follows:
I. Basic information
On August 6th, the cement plant received the notice xxx[20xx] 187 from the district government 1998 on further strengthening the work of safety in production. The leaders of our company attached great importance to it, and immediately convened a factory-wide staff meeting to convey the spirit of the superior meeting, and decided to carry out a comprehensive safety inspection in the whole factory and seriously carry out safety inspection. On August 16, each workshop immediately mobilized the masses to find hidden dangers, implemented rectification measures, and put forward rectification opinions on the problems existing in the workshop, such as the safety production management system, imperfect post operation procedures, and irregular electrical appliances and circuits.
Second, the existing problems
In this safety inspection, two problems were found and corrected immediately. The main problems found in the inspection are:
1, labor protection articles are used improperly, and some employees do not wear insulating shoes or helmets.
2, electrical appliances, lines are not regularly checked, lines aging, wiring is not standardized, temporary electricity private connection, knife switches exposed.
Third, the rectification measures
In view of the above problems, the next step is to strengthen measures, urge the workshop to rectify on time, review on time, and follow up the rectification to ensure that the rectification is in place.
1, strengthen leadership and establish awareness of safety in production. To strengthen measures and conscientiously implement the responsibility system for production safety, leaders of all workshops should put the work of production safety on the important agenda and personally grasp it. It is necessary to intensify the work of production safety, conscientiously implement the policy of "safety first, prevention first", adhere to the principle of who is in charge and who is responsible, implement the responsibility system for production safety at all levels, and earnestly implement it. .
2, law-abiding, establish and improve the rules and regulations of production safety. Each workshop shall, in accordance with the requirements of the municipal party committee, the municipal government and relevant departments for safety production, establish and improve safety production rules and regulations, post operation procedures and organizational structure, so as to truly have rules to follow, laws to follow, organization and implementation, system implementation and measures implementation. At the same time, do a good job in publicity, education and training of safety production, and enhance the awareness of safety production and legal concept of leaders and employees.
3, regular inspection, careful investigation and rectification of hidden dangers. Our inspection of production safety should be regular, institutionalized and standardized, which is mainly reflected in the word "diligence" in our work. Be diligent in asking questions, urging and checking. It is necessary to urge enterprises to speed up the rectification of potential safety hazards raised in the inspection, nip them in the bud and reduce the occurrence of safety accidents.
4. Strict discipline and serious accountability. All workshops should do a good job in the prevention of production safety accidents, and put an end to all kinds of accidents. In the event of an accident, we should conscientiously implement the accident reporting system and report it step by step in time. Units that have production safety accidents shall, in accordance with the principle of "four no-misses", seriously investigate the responsibilities of the main responsible persons and relevant responsible persons to ensure the safety of people's lives and property.
Self-inspection and self-correction report on production safety 2 In view of the situation of production safety in our city this year, in order to fully implement the spirit of the work conference on production safety of governments at all levels, combined with the company's reality, the company organized a leading group on production safety to conduct a major inspection of the company on June 28th.
First, check the safety system construction
Check the company's safety production management system and put it on record, and conduct corresponding drills on the company's operating procedures, special post evaluation and emergency plan to verify its feasibility and operability; At the same time, it also conducted a comprehensive inspection on whether to regularly participate in the training of safety production management personnel and special operations personnel organized by higher authorities, whether the operation of each post is properly standardized, whether it can be continuously updated in practice, whether institutions and cadres and workers at all levels consciously abide by the contents of the system and regulations, and whether there are violations. , and improved the areas that still need to be improved, and punished the relevant personnel who did not comply with the implementation of safety production norms.
Second, the safety facilities
Through inspection, the inspection team issued a notice of rectification of hidden dangers, and ordered relevant departments, posts and personnel who failed to meet the standards to rectify within a time limit. According to the issued rectification notice, the personnel, time and measures are determined one by one, and all of them are required to be rectified on time, and the facilities and equipment with potential safety hazards or failing to meet safety standards are shut down for rectification, thus eliminating potential hazards in time and providing a strong guarantee for safety.
Three. Safety publicity and education
The company always adheres to the hidden danger management once or twice a month and the key safety management investigation once a week, holds a summary meeting, analyzes and summarizes the achievements and existing problems in safety production, arranges and implements the hidden dangers identified, and the workshop is responsible for organizing the implementation and checking the implementation. And make full use of Saturday regular meeting to learn the knowledge of safety production prevention, daily pre-shift meeting, weekly special meeting and other forms to convey learning to the government.
The company's relevant regulations, systems and requirements, and strengthen the education of employees' safety situation, safety responsibility and safety awareness, carry out job skills training and job skills training, improve employees' standardized operation skills, conduct centralized training for new employees, and arrange post work only after passing the examination. The company's safety education is in good condition, warning education is always unremitting, education pays attention to the effect, and it is not spared if it fails to meet the standards.
Report on self-examination and self-correction of safety production 3. Safety production focuses on "prevention". My town has a large forest area, many wood processing enterprises, and most of the buildings are wooden structures. The focus of this safety inspection is mainly wood processing enterprises, non-coal mines, internal units, schools and service industries. The following is the self-inspection report of this safety inspection:
First of all, concentrate on your goals.
First, do a good job in fire safety publicity and education. Use the street to publicize fire safety to the masses every day. The units and departments participating in the publicity activities include enterprise offices, power supply stations, judicial offices, traffic police, industry and commerce, taxation, police stations, cultural radio and television stations, and agricultural stations. Publicity to the masses through photo exhibition, distribution of leaflets, recording and broadcasting, explanation and other means has played a very good publicity effect.
The second is to conduct a thorough investigation of fire safety evacuation routes, safety exits and safety signs in crowded places in the town.
The third is to conduct a major inspection of the setting of power lines and the use and management of electrical equipment. In particular, all units, tenants, rural household electricity and wood processing enterprises in Xiajie Town were inspected emphatically. The remaining administrative villages and mining enterprises also sent special personnel to investigate and implement them.
Fourthly, the fire prevention awareness of all kinds of people, especially the residents of market towns and migrants, middle school students and primary school students, was investigated by questionnaire sampling.
Fifth, strictly check the configuration of fire-fighting equipment in all units, especially for wood processing enterprises, mining enterprises and related units in the town.
Second, the organization is sound and the understanding is in place.
In order to ensure the smooth progress of production safety, the town party committee and government set up a leading group for production safety, with mayor XXX as the team leader and vice mayor XXX as the deputy team leader, with members including police station, enterprise office, central school, judicial office, industrial and commercial office, power supply station and forestry station.
In their daily work, the town party committee and government leaders also use various meetings to organize cadres and workers to seriously study and implement the laws and regulations related to fire safety work and the spirit of the meeting, so as to improve the attention of all units to safety work, and require all village committees and units directly under the town to insist on speaking at every meeting, and make sure to put safety work on an important work schedule to control and reduce the occurrence of safety accidents.
In this safety inspection, the town party committee and government specially deployed comrades with rich safety experience from industrial and commercial offices, police stations, cultural stations, enterprise offices, central schools and other relevant departments to form a special safety inspection team. Because these comrades have a lot of practical experience in fire safety work and have a deep understanding of fire safety work, they can really attach great importance to it ideologically. With the participation of these capable comrades, the inspection team carried out this fire safety inspection seriously and responsibly.
On the whole, the security risks of this major inspection are not very prominent, but there are also shortcomings. Specific performance in the following aspects:
1, some places and some people are not aware of safety, and there are some potential safety hazards, such as aging indoor power cord, more exposed brakes, nonstandard operating procedures, and too much combustible materials around the oven.
2. Evacuation passages and exits in some public places do not meet fire safety requirements.
3. Some organs, units and enterprises lack necessary fire control facilities, and there is no safety production management system and safety emergency plan.
4. The inspection team lacks relevant technical knowledge about the inspection of gas stations, liquefiers and pressure vessels, and it is difficult to issue rectification instructions for hidden dangers.
5. Some wood processing enterprises lack corresponding licenses, and there is a phenomenon of "cloning" of licenses. One certificate for two factories and one certificate for three factories leads to many potential safety hazards, and it is difficult to carry out safety production management.
In view of the existing problems, the town government has made the following treatment:
First, instruct the town power supply station to be solely responsible for the rectification of all power lines and electrical equipment;
Second, the inspection team put forward rectification opinions according to the inspected objects and their situation.
The third is to require units with uneven fire-fighting equipment to purchase as soon as possible.
In this safety inspection, the town party committee and government gave full play to their supervisory role, which showed that the town party committee and government attached great importance to safety work and further enhanced the safety awareness of enterprises and the masses. Many fire hazards that are not conducive to the production safety of the people and enterprises have been effectively eliminated, and the rectification units have quickly carried out rectification according to the rectification opinions put forward. The whole safety inspection has achieved good results.