1. Before entering the construction site, the construction personnel must be educated about the company's safety rules and regulations and the safety of demolition construction, and uneducated operators are prohibited from entering the construction site to participate in the construction.
2, strictly implement the safety operation procedures, shall not be illegal command and illegal operation. After entering the demolition site, it is necessary to observe whether there are potential safety hazards within the operation scope before construction.
3. Personal protective equipment must be worn correctly during construction, and safety helmet must be worn when entering the construction site.
4, are not allowed to wear slippers, high heels, barefoot or shirtless into the construction site.
5, wear hard shoes may not be climbing operations.
6, ready to fire equipment, etc. , to ensure the implementation of fire control measures. When cutting, pay special attention to check whether there are flammable materials below, and make corresponding protection. Check to make sure there is no fire before leaving after work every day.
7, without safety education and training qualified shall not mount guard, special operations personnel must hold a special operation qualification certificate before mount guard.
8, where there is no safety facilities for aerial work more than 2m, must fasten your seat belt; Seat belts must be hung high and used low, and must be fastened before operation.
9. Materials and tools for working at heights shall not be thrown down at will, and must be placed in designated areas as required.
10, don't do homework after drinking.
1 1. Safety technical disclosure shall be made to relevant operators before operation. Strictly implement safety technology.
It is stipulated that illegal operation and barbaric operation are strictly prohibited, causing accidents that should not happen.
12. Cross operation is strictly prohibited. When working above, it is forbidden to walk, stay or work below.
13. During the demolition operation, personnel are prohibited from entering the area irrelevant to the demolition site.
14. Oxygen bottles and acetylene bottles shall not be mixed at the demolition site, and the hot work distance shall meet the safety requirements.
Nanjing Jiangnan cement co., ltd
20 13 August 27th
Matters needing attention in site safety operation [2]
1, before entering the construction site, construction personnel must carry out education and assessment on construction safety and fire control knowledge, and employees who fail the assessment are prohibited from entering the construction site to participate in the construction.
2, enter the construction site must wear a helmet, fasten the hat belt, and the correct use of personal labor protection articles.
3. Strictly carry out the operation procedures, and shall not command or operate illegally, have the right to refuse the instruction of illegal operation, and have the responsibility to stop others from operating illegally.
4. Personal protective equipment must be worn correctly during construction, and safety helmet must be worn when entering the construction site. Don't use fire without permission, and don't operate after drinking.
5, are not allowed to wear slippers, high heels, barefoot or shirtless into the construction site.
6, wear hard shoes may not be climbing operations.
7, on-site electricity, there must be someone to manage, at the same time, set up a special distribution box, it is strictly prohibited to connect and pull, implement the system of electricity listing, especially to prevent illegal operation, to prevent personal, line and equipment accidents.
8. safe voltage with a voltage below 36V must be used for the lighting of the site construction. When all electrical appliances and tools are not in use, the power supply must be cut off at any time to prevent the equipment from burning out.
9, in the use of blowtorch, electric welding machine and the necessary place to make a fire, to fill in the registration application, guardianship by designated personnel, equipped with fire equipment, etc. , to ensure the implementation of fire control measures. When welding, special attention should be paid to check whether there are flammable materials below and make corresponding protection. After use, check that there is no fire before leaving.
10, without safety education and training, no one is allowed to work, and non-operating personnel are strictly prohibited from entering the dangerous area; Special operations personnel must hold a special operation qualification certificate.
1 1, when working at a height of more than 2m without safety facilities, you must fasten your seat belt; You must fasten your seat belt before operation.
12. Materials and tools for working at heights shall not be thrown up and down.
13, electrical and mechanical equipment, must have a leakage protection device and reliable protection by zero, can start using.
14. Without the approval of relevant personnel, safety facilities and safety devices shall not be dismantled at will; If it needs to be dismantled due to operation, it must be restored immediately after the operation is completed.
15, do not do homework after drinking.
16, always complete and maintain the fire fighting equipment, so that it can be maintained and used. Seriously implement the fire responsibility system step by step and do a good job in fire control.
17, construction lighting should be sufficient at night, lamps and lanterns are not allowed to be hung on erected steel bars or other metal components, and wires should be overhead.