After installing the monitoring system, you need to set up the monitoring system. Of course, the setting needs to be done step by step. In addition to static surveillance video, you can also set the function of mobile surveillance video. So how to operate when monitoring the motion detection video needs to be set? Note: However, the motion detection area of one channel cannot be copied to other channels. Enter the image setting menu interface-select the channel number-define the sensitivity level of motion detection (it is recommended to set it to "2")-set the motion detection area-enter the motion detection alarm processing menu-set the trigger channel of motion detection-select the deployment time of motion detection processing. And copy to other dates-Set the processing mode of motion detection-Save the processing settings of motion detection-Save the motion detection settings of all channels-Select "ü" in the menu video recording setting interface, then enter the setting interface, set the video recording type as "Motion Detection", set the time period and copy to different dates, and click "OK" to save the settings. Shanghai Monitoring Equipment Tip: If you want to return to static detection video, you can easily operate it, just set motion detection to off.