1, battery charging

Charge the camera before use. Charging method: Align the positive and negative poles of the battery with the positive and negative poles of the charger, and then plug the charger into the power supply. It takes 240 minutes to charge the battery. After the charging is completed, the indicator light goes out. At this time, disconnect the power supply and take out the battery. Use the camera charger when charging.

Step 2 charge the battery

Open the back cover, tap the battery back cover in the opening direction, open the battery back cover, fix the battery and close the back cover.

3. Storage Plug-ins

Because the camera is not equipped with a memory card, you need to buy it yourself. Because after installing some memory cards, the shooting and storage speed of the camera will slow down, and some of them will seriously lead to the inability to store high-quality animations correctly, so it is recommended that you use ultra-high-speed SD memory cards.

Step 4 take a snapshot

(1) Aim the camera at the subject. If smart mode is adopted, there will be words at the bottom right of the screen to explain the shooting type, and you can zoom the shooting according to the actual situation.

(2) Press the shutter button halfway to focus the image. When the focus is completed, the camera will make a sound, and the back light spot will turn green, and the focus frame will turn green.

(3) Keep the camera still and press the shutter button, so that you can take pictures quickly.

Extended data:

1, master the correct operating procedures. ?

Strictly follow the operation steps in the manual, and turn off the power when replacing the battery and memory card. When downloading images from a digital camera to a computer, it is necessary to connect the digital camera to the computer with wires and turn off the camera before connecting. There are three taboos in the use of cameras:

First, high temperature and high humidity environment. For example, don't store your camera in an exposed car for a long time in midsummer.

Second, the erosion of dust particles. Once image sensors such as CCD fall into dust, dust particles will form black spots in the fixed position of each image taken later, even if they can be disposed of later, it is very inconvenient. ?

Third, impact vibration damage.

2. Maintenance of image sensor.

Image sensor is the core component of digital camera imaging. For ordinary pocket digital cameras that can't change lenses, the image sensor is not exposed, and it is packaged in the digital camera, so it doesn't need to be maintained deliberately.

Casio official website-Digital Camera