2. Major scientific and technological key project of the Ministry of Education in 2002: Research on key technologies and technological experimental devices of ultra-high speed precision CNC grinding (400,000);
3. Key project in Hunan Province: development and industrialization of ultra-high speed CNC cylindrical grinder (500,000);
4. Key project of Hunan Province: Research on key technology and process simulation of ultra-high speed precision CNC surface grinder (654.38+0.5 million);
5. Hunan Economic and Trade Commission Project: Processing Experiment and Technological Research of Hard and Brittle Materials (10.5 million);
6. Key Project of Education Reform in Hunan Province (Hunan Provincial Education Commission): Research on Collaborative Mode of Talent Training of Modern Design and Advanced Manufacturing Technology University Group (40,000);
7. Key scientific and technological project of Changsha: key technology of ultra-high speed intelligent grinder (50,000).
1. national natural science foundation: research on mechanical safety design method of high-speed and high-efficiency grinder (1.8 million), 2001~ 2003;
2. Project supported by excellent teachers of the Ministry of Education: Research on NC Forming Technology and Equipment of Special-shaped Section Parts (65,438+200,000), 2000 ~ 2002;
3. Hunan Provincial Science and Technology Commission Project: Research on Improved Design of Automobile Traffic Safety (20,000), 2000-2003;
4. Key project of the Ministry of Machinery Industry in the Ninth Five-Year Plan: Research on NC Forming Technology and Equipment of Piston Ring (300,000),1997 ~ 2000;
5.2 1 Century Network Course Plan of the Ministry of Education (Department of Higher Education): Network Course Construction of Descriptive Geometry and Mechanical Drawing (50,000), 2006 5438+0 ~ 2002;
6. Technical Development Fund for Automobile Industry (Ministry of Machinery): Research on CAD/CAM software for NC machining of automobile piston rings (20,000),1996 ~1998;
7. Automotive Industry Technology Development Fund (Ministry of Machinery): application research of computer system identification in automobile product manufacturing and testing (20,000),1997 ~1999;
8. Machinery Industry Technology Development Fund: Safety Design Method of Mechanical Products and Computer Aided Information System (250,000, account 50,000),1997 ~1999; 1. mechanical safety and modern enterprise strategy, China mechanical engineering, 2001;
2. Research on mechanical safety design method, China Mechanical Engineering, 2001;
3. Analysis and research on collision accident between automobile and highway guardrail, Journal of Mechanical Engineering, 2003;
4. Dynamic response modeling of collision between car and guardrail on expressway, Journal of Mechanical Engineering, 2003;
5. Dynamic response analysis of car occupants when cars collide with highway guardrails, Journal of Hunan University, 2002;
6. A method for monitoring high-power grinding by using electric spindle current signal, Key Engineering Materials, 2003;
7. Application of finite element calculation in guardrail design and occupant protection, computer simulation, 2003;
8. Analysis and research on collision accident between automobile and highway guardrail based on computer simulation, Journal of Hunan University, 2002;
9. Overview of ultra-high speed motorized spindle structure, Precision Manufacturing and Automation, 2002;
10. Key technology of high-speed and high-power precision motorized spindle, Journal of Hunan University, 2002;
1 1. Development of CAD system for piston ring free profile, Journal of Hunan University,1998;
12. Research on NC machining system of middle convex variable ellipse piston, Journal of Hunan University,1998;
13. development of CAD system for full NC machining of piston ring excircle, journal of Hunan university, 2000;
14. research on in-situ measurement technology of piston ring excircle machining, journal of Hunan university, 200 1.
15. Mathematical model of safety risk assessment based on mechanical product scoring method, Journal of Hunan University, 200 1.
16. research on the detection system of full numerical control special-shaped piston ring lathe, computer automatic measurement and control, 2000;
17. Computer solution and drawing of an application problem in engineering graphics, Journal of Hunan University,1998;
18. The realization of A/D conversion interrupt programming in VC++6.0, computer automatic measurement and control, 2001;
19. Hazard analysis and risk assessment in the safety design of common grinding machines, Journal of Hunan University, 2001;
20. Summary of research on rapid solidification near-net forming technology of thin strip, Journal of Hunan University,1996;
2 1.Foxbase+ command and microcomputer instruction mixed programming drawing, computer application research,1993;
22.Foxbase+ Vector Chinese Character Program Design and Application, Computer Application Research,1992;
23. Microstructure of Al-Si alloy rapidly solidified by two-roll method, Journal of Materials Research,1998;
24. Flow analysis of Al-Si alloy droplet rolling, Journal of Hunan University,1995;
25. Structural optimization design of ultra-high speed surface grinder based on Ansys, Machinery, 2004;
26. Comparative study on the performance of high-speed precision ceramic ball bearings and steel ball bearings, Machinery, 2003;
27. Analysis of vibration characteristics of new high-speed precision spindle unit, Proceedings of the second vibration utilization engineering conference, 2003;
28. Design and analysis of thermal characteristics of high-speed precision spindle bearings, Machinery, 2003. 1. Development and application of database graphic function, Hunan Science and Technology Press, 1994, first editor;
2. Computer Aided Design and Drawing, Hunan Science and Technology Press, 1995, editor-in-chief;
3. Computer Graphics Processing Principle and CAD Application Technology, published twice by Hunan Science and Technology Press, 1992 and 1996. 1999 won the first prize of excellent textbooks in Central and South China of China University Publishing Association, the third prize of excellent books of Hunan Xinhu Publishing Bureau, the first prize of excellent textbooks of Hunan University, and the second editor;
4. Shadow Perspective, Dalian University of Technology Press, 1999, won the second prize of Dalian Excellent Textbook in 2000/kloc-0, and was the second editor;
5. Descriptive Geometry and Mechanical Drawing, Hunan Science and Technology Press, 1996, the first editor;
6. Drawing of building equipment, China Building Materials Industry Press, 2000, deputy editor;
7. Architectural Structure Drawing, China Building Materials Industry Press, 200 1, 2nd edition.
(four) teaching research and teaching reform papers and projects
1. Some thoughts on strengthening the teaching effect of young teachers, China Higher Education Research (authoritative), 1993, independent;
2. Improving the quality of teaching and learning with three-dimensional teaching method, China Higher Education (authoritative), 1993, independent;
3. Countermeasures to prevent cheating in exams, teaching and textbook research, 1996, second author.
4. Preliminary study on cultivating students' creative thinking in teaching, Research on Higher Education of Mechanical Industry, 1998, second author;
5. Vigorously promote interdisciplinary, and strive to cultivate compound talents —— Conception of interdisciplinary talent training mode of Hunan University's "Modern Design and Advanced Manufacturing Technology" discipline group, the second author of "Proceedings of the International Academic Conference on Mechanical Engineering Higher Education" (Mechanical Industry Press);
6. Network course construction of Descriptive Geometry and Mechanical Drawing, a network course construction project of the Ministry of Education for 2 1 century, 2000-2002, moderator;
7. Research and Practice on the Mode of Talent Training System in Modern Design and Advanced Manufacturing Technology University, Key Project of Hunan Education Reform, 200 1 ~ 2002, Moderator. Patent application 10, including 5 invention patents, 5 utility model patents and 4 new utility model patents:
1. Method and equipment for high-speed and ultra-high-speed plane grinding and cylindrical grinding, invention patent, first applicant;
2. High-speed and ultra-high-speed plane grinding method and equipment capable of realizing accurate vertical feed, invention patent, first applicant;
3. High-speed and ultra-high-speed cylindrical grinding method and equipment, invention patent, second applicant;
4. Method and equipment for realizing high-speed and ultra-high-speed plane grinding, invention patent, second applicant.