Curtains can make the finishing point in room decoration. Everyone has put a lot of thought into shopping. Similarly, attention should be paid to curtain installation. Let's take a look at the curtain installation methods and precautions and other related information!
Precautions for curtain installation
1, when installing the curtain box, first find a good location, carefully draw the dimension line, and accurately install the embedded parts. Before installation, the line should be crossed correctly, and the installation ruler must be consistent in elevation and accurate in center line.
2. The curtain boxes installed at both ends should have the same length.
3. In order to prevent the curtain rail from falling off, the thickness of the general cover plate should not be less than 15mm, and the cover plate thinner than 15mm should be fixed with machine screws.
4. The length of the track depends on the window and window cover, plus the buffer position of 10 cm.
5, wood to brush paint again before installation.
6. The distance between the lower edge of plastering line and the upper edge of window cover should be at least 10cm.
7. The length of curtain rod should be greater than the width of window cover to avoid light leakage.
8, curtain rod installation should be level and firm.
Curtain installation method
1, the accuracy of positioning and drawing lines is related to the success or failure of curtain installation. First, measure the distance between the fixing holes and the size of the required installation track.
2, install the curtain rail:
(1) Curtain rails can be divided into single rail, double rail or triple rail. When the width of the window is greater than 1200mm, the curtain rail should be disconnected, and the bending at the broken part should be staggered, with a gentle bending curve and a lap length of not less than 200mm. Ming curtain boxes are usually equipped with rails first. Machine screws should be added to the heavy curtain track; The concealed curtain box should be installed behind the track. The small angle of the heavy curtain track should be closely arranged, and the specification of wood screws should be not less than 30 mm
(2) Install the elevator, rotate the elevator 90 degrees to connect with the track, and install the elevator on the top plate with self-tapping screws. If it is a concrete structure, it is necessary to add expansion screws.
3, install the curtain rod:
(1) Calibrate the connecting fixture, install the rod or wire and pull it on the fixture. Do level off, consistent with the room elevation.
(2) Standard curtain track (double track) shall be installed, and its foundation width shall generally be above 15CM, and monorail may be reduced as appropriate.
4. Adjust the position of floor-standing curtains or curtains hanging on the table. When installing the track, the width of the window sill should be given to avoid unsightly curtains hanging down.
The above is the curtain installation and precautions that Bian Xiao introduced to you today! For more details, please pay attention to the home improvement network!
Original address: /news_ 13 134/