Fan Wen 202 1 (1) In order to seriously implement the policy of safety first, prevention first and comprehensive management, and comprehensively improve the safety awareness of employees, according to the spirit of the Notice on Launching 20021Safety Production Month issued by the company, our project has carried out safety production month activities in depth in combination with the actual situation of current safety production work. These activities are summarized as follows:
First, strengthen leadership, elaborate organization and careful deployment.
Under the guidance of Scientific Outlook on Development and the concept of safety development, the project leading group held a mobilization meeting for safety production month activities in time, conveyed the spirit of the notice, carefully analyzed the safety production form of the project, made detailed arrangements and careful arrangements for the safety production work of the whole bid section, and put the organization, personnel and measures in place to ensure the smooth development of the activities.
Second, strengthen publicity, raise awareness and create an atmosphere.
During the activity, the whole project focused on safety responsibility, focused on the implementation of the theme of the activity, thoroughly studied and publicized the laws and regulations on safety production, further strengthened employees' safety awareness and standardized employees' safety behavior. The publicity and education activities of safety production month were widely carried out in the form of propaganda slogans, banners, blackboard newspapers and brochures, which created a good safety publicity atmosphere. The monthly investment in safety production is nearly 1 1,000 yuan, 5 potential safety hazards have been identified, 5 have been rectified, 32 banners have been hung, 8 slogans have been posted, and more than 360 leaflets have been distributed on the safety production publicity and education day.
Third, strengthen inspection and pay close attention to rectification to ensure safety.
During the activity, the project safety and quality department organized personnel to participate in the safety production month activities of the whole bid section.
1. Construction safety management: the safety management and education of construction personnel have been effectively strengthened. Each construction site of the project is equipped with full-time security officers, and each security officer wears a red armband to monitor the safety of the job site and prevent illegal operations. At both ends of the intersection of construction access road and bridge construction, there are special personnel to command vehicles, and obvious safety signs and safety slogans are set up on the construction site. In addition, emergency rescue drills for flood control were held, and on-site managers and constructors were given safety study and education regularly and irregularly, which effectively improved the safety awareness of constructors, put safety construction throughout the whole process of engineering construction, and ensured the quality, safety, benefit and progress of engineering construction. Special operations personnel shall hold relevant certificates and strictly abide by the safety operation rules, and the use and storage of inflammable and explosive dangerous goods shall be managed in accordance with the relevant provisions of the state on fire safety. The safety supervision department requires that every place must be tightened, equipped with safety belts and helmets, and sign safety production contracts with migrant workers to ensure the safety of construction personnel.
2. Internal security: During the on-site construction, the system of leading shift, employees taking turns to be on duty and patrolling at night shall be seriously implemented to effectively strengthen internal security.
3. Special action for the investigation and management of hidden dangers in production safety: During the investigation stage of hidden dangers from xx to xx, the leaders of the project department convened team members and members of the Safety and Quality Department to hold a special meeting in time according to the spirit of the notice, analyzed and discussed the hidden dangers existing in the project, implemented the responsibilities, formulated measures, determined the work content, objectives and tasks and phased work plans, and achieved good results, eliminated hidden dangers and ensured safe and efficient construction production.
In a word, through the activities of Safety Production Month, the awareness of safety production of project managers and employees has been significantly enhanced, the safety management system has been strictly implemented, potential safety hazards have been effectively rectified, and the safety of employees' lives and property has been effectively guaranteed, but there are still some shortcomings. Our project will continue to adhere to the policy of safety first, prevention first and comprehensive management, pay close attention to safety management and promote the steady development of safety production in our project.
Summary of On-site Work Safety Month: Model 202 1 (II) According to the unified deployment and requirements of the project management company, the project department of Lin 'an District set up a leading group for work safety month activities and made an activity plan. Combined with the actual situation of the project site, the "Safe Production Month" activity with the theme of "strengthening the red line awareness and promoting safe development" was carried out, and publicity activities were vigorously promoted to popularize the knowledge of safe production and focus on the special treatment of safe production on the construction site. Related activities are summarized as follows:
I. Basic information on major activities
1, seriously carry out publicity and education activities to create a good social atmosphere.
The theme of this year's Safe Production Month is "Strengthening the Red Line Awareness and Promoting Safe Development". Closely around this theme, carry out extensive and in-depth publicity, education and training on production safety. On 202 1 xx, the project department will organize employees to carry out the safety signature activity of "observing the rules and discipline, starting from me". Publicize and implement the company's activity requirements of "Safety Production Activity Month" to all construction units, and use production meetings, slogans, billboards and other publicity forms to educate all management personnel and construction personnel to abide by the rules and laws, so as to improve the safety production awareness of all employees. Popularize safety culture, spread safety technology, let all managers and constructors know, improve the safety quality of all constructors in the project department, always keep safety in mind, and promote the stable development of safety production in the project department.
2. Strengthening the safety and civilized management of the construction site and deepening the special management of safety production on the construction site are the key points of safety production supervision, and putting an end to potential safety hazards on site and improving personal prevention ability are the basis of doing a good job in safety production. On October xx, 20021year 10, the project department organized the supervisor and the project leader of the construction unit to inspect the construction site, and monitored and inspected the major hazard sources, scaffolding, deep foundation pit, tower crane, construction electricity and formwork support system that may cause the construction collapse. All construction units have also carried out rectification and implementation closely around the safety production in the construction site, which has improved the safety management level and safety protection of the construction site.
3, the project department to strengthen safety publicity and education and personnel training. First of all, use propaganda slogans, posters, blackboard newspapers and briefings to educate all employees in a three-dimensional way, focusing on organizing construction technicians, workers with special types of work and management personnel for internal training and external training, and focusing on learning laws and regulations such as the Safety Production Law; Establish the idea of safety first; Establish a constant and persistent thought; Establish the idea of strict management. In this way, the workers' awareness of safety in production is obviously improved, and the idea of safety in production is deeply rooted in the hearts of the people.
Second, the existing problems and the next step plan
This month's "Safety Production Month" activity has played a good role in raising the awareness of enterprise safety production managers, improving the safety and civilized management level of construction sites, and promoting the steady development of on-site construction safety production, and achieved certain results. However, there are many problems in safety production management: a few contractors, especially the person in charge of the site, have weak safety awareness, are not equipped with full-time safety officers who meet the requirements, and the safety management of the construction site is not in place, especially the safety protection and monitoring of major hazard sources on the construction site.
In view of the above problems, in order to effectively improve the level of on-site safety management, the project department focuses on the next work objectives:
1, further strengthen the awareness of safety in production, especially the safety awareness of the person in charge of the construction unit, urge to further improve the organization of safety in production, equip full-time safety officers, improve various safety production management systems, and strengthen the responsibility for safety in production to people.
2. Strengthen the safety and civilized management of the construction site, continue to deepen the special management of safety production, urge the construction unit to do a good job in the safety and civilized management of the construction site, effectively eliminate the potential safety hazards existing in the construction site, and strengthen the implementation of safety responsibilities.
3. Actively cooperate with superior departments to carry out various safety activities in urban areas. Strengthen safety management, pay close attention to safety education and training, clarify safety supervision responsibilities, vigorously create a safe production atmosphere, and improve employees' understanding of the importance of basic work of safety production. Ensure the stable development of safety production, so as to ensure the smooth progress of on-site construction and production.
Summary of on-site safety production month: Fan Wen 202 1 (3) According to the relevant notification requirements and guiding ideology of the "Safety Production Month" activity, our project department actively publicized the theme of the "Safety Production Month" activity on the basis of earnestly summarizing the previous safety production experience and on-site management, aiming at the construction characteristics of this project: promoting safety culture, serving scientific development and celebrating the 60th anniversary of the founding of New China. So far, we have standardized the construction site, standardized the management of the construction site, and carried out the publicity of "Safe Production Month" in strict accordance with the activity plan: solid, effective and meticulous organization, and strengthened the overall construction of the team, which effectively solved the weak links and outstanding problems of safe production, put an end to the occurrence of safety accidents, and ensured that the activities of Safe Production Month achieved the expected purpose. The following are only the specific practices of on-site safety production, civilized construction and safety management of our project department during the activities, which are summarized as follows:
First, adhere to the policy of "safety first, prevention first" and fully realize the objectives and tasks of "Safety Production Month"
"Safety first, prevention first" is the basic policy of building construction. In order to seriously implement this policy, the project department set up a leading organization for safety production, defined its work responsibilities, set up a leading group for safety production with the project manager as the team leader, and also set up a leading group for civilized construction with the project manager as the team leader, thus establishing the position of the project manager as the first responsible person for safety production and civilized construction. The project department not only created safe working conditions for employees, but also made efforts to improve the working and living environment and sanitary conditions on the construction site, gradually improved and improved the safety education and training mechanism, and integrated the concept of "people-oriented and safe development" into production activities, which stimulated employees' sense of honor and responsibility and further mobilized their labor enthusiasm, initiative and creativity.
Second, focus on the production line, carefully prepare the construction organization design, and implement various safety technical measures.
Facing the production line, highlighting the key points and carefully compiling the construction organization design: the safety technical measures in the construction organization design are the principles that we should abide by in doing a good job in safe construction. We work out the activity plan, formulate the system, and strictly follow the system to ensure that all staff participate in the activity, and ensure that every cadre and employee participates in a safety activity and receives a safety education. All managers closely focus on hidden danger management, safety publicity and training, emergency drills and other key contents. , organize and carry out various safety activities such as production safety, fire safety, flood control safety, crowded places safety, special equipment safety, construction safety and underground space safety. , to prevent the occurrence of all kinds of accidents, realize the precontrol goal of safe and civilized construction. In order to ensure safe and civilized production and construction, we have formulated the following technical measures for safe production:
1. Carry out three-level safety education for workers entering the site, and strengthen the technical disclosure of special safety production during construction.
2, the construction of electricity in strict accordance with the requirements of the three-phase five-wire system, using cable laying along the wall, grounding wire using yellow-green double-color line, and achieve three-level distribution, secondary protection and one machine, one box, one brake and one leakage protection.
3. Stairs on the construction site should be provided with handrails, and unsafe work sites should be hung.
4, transformer room, wooden shed and other fire prevention key parts set up obvious fire signs, and equipped with fire extinguishers.
5. Standardize the operation of mechanical equipment, correctly maintain all mechanical equipment, so that its safety and technical conditions are always in good condition, the performance of protective devices is intact, the operation mode and procedures are correct, and "two guarantees and three guarantees" are implemented in management (personnel, equipment, package use, package management and package maintenance).
6, building facilities, must be qualified rear can be put into use, in use should adhere to the ten accurate ten are not allowed.
7, the construction site set up full-time security officer xx, each team leader for part-time security officer and is responsible for the daily supervision and inspection of the site.
Three, take the opportunity of safe production month, establish and improve various rules and regulations, and comprehensively promote the management of safe production.
We took the opportunity of Safety Production Month to establish and improve rules and regulations in strict accordance with the requirements of the state and Beijing Municipality on promoting the "three actions" of safety production, and comprehensively and thoroughly carried out safety production management actions. Since the establishment of the project department, we have started to establish and improve the rules and regulations. All institutions in the project management department have established their work responsibilities, and all departments and offices have formulated corresponding work flow charts, such as safety work flow charts. The project department has established a safety system.
Based on the relevant regulations of xx City, according to the characteristics of the project, combined with the relevant regulations of the company, a series of systems and standards, such as safety production management measures, temporary electricity consumption management system, civilized construction management standards, civilized construction inspection system, safety production inspection standards, safety production education system, casualty accident reporting system, safety reward and punishment regulations, etc., have been formulated in depth. These standards and systems strive to be detailed, specific and operable from responsibility, authority to implementation process. Formulate the specific contents and requirements of various standards and systems from a high starting point, and organize all employees to study and implement them. The perfection of these systems makes the work of the project department have rules to follow, standardized management, clear responsibilities and rights, and improved the work performance of employees.
Fourth, strengthen the safety education and training for employees, and strive to improve the awareness of safe and civilized construction.
Safety production education and training is an important basic work to realize safety production. According to the policy of "safety first, prevention first", various forms of publicity and education have been carried out, which has made unremitting efforts and sounded the alarm. In order to further consolidate and deepen the safety month activities, we timely summarize and popularize safety education and gradually improve the safety training mechanism. First, new employees must participate in three-level safety education and take a written test before they can take up their posts. The second is to pay close attention to on-site safety publicity and education. We use billboards and slogans to do safety work and set up standard warning signs. Third, strengthen professional and technical training and comprehensively improve the technical quality of employees. Enhance employees' safety awareness, lay a solid foundation for achieving safety in production, achieve results in safety production month activities, create a safe and stable social environment, and celebrate the xx anniversary of the founding of New China.
Five, strict safety inspection, promote safety culture, service scientific development.
Since the launch of "Safety Production Month", we have made a planned, scientific and reasonable layout of the limited construction site, which enabled materials to enter the site accurately, timely and orderly, reduced the backlog and secondary handling, and ensured the smooth flow of road transportation and fire exits.
In construction, safety work should be "X-worker". That is, construction will not be carried out without safety, technology and quality assurance measures; Do not meet the safety conditions shall not be construction; If the protective measures are not fully configured, no construction may be carried out; Without safety education and technical disclosure, construction is not allowed; If the previous procedure is unqualified, the next procedure cannot be constructed. Effectively control the unsafe behavior of people and the unsafe state of things, and form a safety management model with full staff, all-round, whole process and whole process control. According to the provisions in the Technical Code for Safety in Building Construction, combined with the construction progress and the setting of various types of work, the safety technical disclosure of sub-projects at various stages, small and medium-sized machines and tools, general types of work and special types of work was compiled; For some key processes, the corresponding safety schemes are compiled.
Ensure the feasibility of safety measures, refine the standards of safety work to all aspects of construction and production, and achieve a safe state through standardized behavior. Check and accept various safety facilities with safety standards. In terms of construction safety, we insist on the combination of "self-inspection, mutual inspection and handover inspection". For facilities that are not built according to the standards and fail to meet the standards, stop work immediately for rectification, and return to work only after they are qualified. Punish related violations and potential safety hazards found on site in accordance with the Measures for Rewards and Punishment of Work Safety, fundamentally put an end to all kinds of industrial accidents such as illegal command and illegal operation, nip all kinds of potential safety hazards in the bud, and effectively solve the weak links and outstanding problems of work safety.
Six, strengthen the inspection tour, timely rectification report safety records.
During the activity, we will conduct a safety inspection once a week, issue a rectification notice in time for the problems found, and conduct a review. Continuously put into production safety, monitor major hazard sources 24 hours a day, and report weekly safety inspection records to the resident supervisor in time for the supervision unit to manage. At the end of each month, under the leadership of the deputy project manager, conduct a thorough inspection on the safety production and civilized construction of each construction site, and gradually establish a long-term mechanism for safety production. Through the activities, our unit effectively solved the main problems existing in safety production, and ensured that all kinds of potential safety hazards were significantly reduced and effectively controlled.
Summary of Monthly Work Safety on Site Model 202 1 (IV) Work safety on site has always been the top priority of all work. As a safety officer, I always adhere to the principle of "people-oriented, safety first, prevention first, and combination of prevention and elimination", and adhere to the combination of management responsibility and specific measures. Under the strong support and leadership of the leaders, combined with the actual work, the fire emergency plan has been re-formulated, fire emergency drills have been conducted, and daily safety inspections have been organized regularly. During the inspections, the on-site safety system has been continuously improved to eliminate all kinds of safety hazards. Since the beginning of this year, the xx Project has carried out joint fire safety inspections for as many as xx times, conducted fire safety knowledge and skills training 1 time, conducted fire emergency drills 1 time, conducted self-examination and self-correction activities for many times, and held a fire safety meeting once a week.
First, pay attention to fire safety work to ensure safe production.
1, hidden trouble investigation. Investigate hidden dangers in the construction site, office area, living area, processing plant and warehouse, focusing on fire control and electricity consumption during construction. After the inspection, timely sort out hidden dangers, strictly implement the responsible person, time, funds and measures, and quickly rectify.
2. Security system. Fire safety management system, hot work approval management system and fire safety inspection management method were introduced. Hot work must apply for approval, so as to achieve "five hot work in place", that is, "hot work approval in place, flammable items in place, special care in place, fire-fighting measures in place, and fire-fighting equipment in place". Do a good job in daily fire safety inspection. Implement the public security patrol system, set patrol points in office area, living area, construction site, material yard, warehouse and other risk points, arrange public security safety supervisors to patrol and sign in every day, and feedback the patrol situation.
Second, the implementation of posts, publicity and education for employees.
1, safety education. Centralized employees watched the video of xx emergency drill in 202 1 xx city. This drill simulates the collapse of tower crane and formwork support, and the accident reporting procedure and emergency rescue procedure are carried out in an orderly manner.
2. Training instructions. The branch manager gave a wonderful explanation on the practical application effect and prospect of the combination of smart site application and safety management in recent years, and all employees had a further understanding of the project's safety standardized physical facilities, smart site application and good civilized construction image.
3. Emergency drills. Actively carry out hidden dangers investigation and effectively realize safety affairs. In each project department, I actively established a hidden danger investigation and management system, earnestly carried out hidden danger investigation and registration, carefully monitored and guided the management process, listened carefully and collected reasonable safety suggestions and opinions from employees, effectively reflected employees' safety wishes to superiors, enhanced the safety awareness, self-awareness and prevention awareness of construction personnel, and continued to pay close attention to the identification and control of major hazards. Effectively implement the "one post and two responsibilities" for safety production, constantly consolidate the foundation of safety development, and ensure that safety management measures are implemented.
4. Promote inspection through training. Carry out the activity of "training to promote inspection" in safety production, and promulgate the new "Safety Management Regulations for Divisional and Sub-divisional Projects with Greater Danger". Through the detailed analysis of the report and disposal of production safety accidents, this paper expounds the key points of enterprise emergency management, so as to fully understand the rich connotation and management methods of safety management and effectively guarantee the safe production of enterprises and projects!
5. Strengthen education. From "I want to be safe" (passive management) to "I want to be safe" (active pursuit), we will improve the safety awareness and skills of all staff through various types of education and training, such as admission three-level education, pre-shift safety publicity, daily safety education and training, monthly safety education and various special safety education, with emphasis on safety education and training.
Third, strengthen internal management and effectively eliminate potential safety hazards.
1, the whole staff continued to innovate and applied safety ropes in many places. In view of the common safety problems in construction and production, special safety innovations were planned with emphasis, and the combination of dredging and blocking was made to try to break the common safety problems one by one from the root of the problems.
2, the preparation of production safety accidents comprehensive emergency plan. With the progress of engineering construction, prepare various special emergency plans for deep foundation pit construction and fire fighting. All employees, including managers and operators, disclose the emergency plan in time to ensure that everyone knows the division of responsibilities and measures for emergency response.
3. According to the progress of the project, timely plan and organize various types and forms of emergency drills such as fire fighting and electric shock. Conduct simulated emergency tests from time to time to check the emergency response of the general contractor and subcontractors. Conduct desktop emergency drills regularly every month. Through high-frequency desktop emergency drills, discuss emergency skills, strengthen the emergency atmosphere, let everyone know their emergency responsibilities, and always tighten the string of emergency.
4. Organize weekly safety inspection. Introduce the safety inspection system, inspect the inspection points in the office area and living area every day, and the safety supervisors inspect the inspection points in the construction site every day, fill in the inspection records and supervise the rectification. Introduce safety inspection system. Put forward the concept of "everyone is a safety officer", upload photos of violations or hidden dangers to the safety inspection system, push them to the responsible person at the first time, and implement rectification according to the principle of "four decisions". If the rectification is not in place within the time limit, remind and deal with them at different levels.
5. Hold weekly safety meeting and monthly safety production team meeting, summarize and analyze the operation of safety management system in the construction process, and deploy the key points and measures of safety control in the next stage. Evaluate in time after each safety inspection to improve the inspection effect.
Safety work is the top priority. We should further enhance our sense of hardship and responsibility, not be careless in our work, and try our best to strive for effective measures to improve the level of supervision and comprehensive management. On the basis of summing up the achievements, we will continue to find the gaps, find the weak points, clarify the direction of efforts, and strive to push the safety work to a higher level.