If you apply once a year, you need to provide the number of hours of continuing education, which proves that professional and technical personnel receive continuing education for a total of not less than 80 hours each year, including not less than 56 hours for professional subjects and not less than 24 hours for public subjects (45 minutes is 1 hour). During the continuing education year, the study time can be used centrally or dispersed. The conversion of credits and hours in the industry departments that have implemented the credit system shall be formulated by the competent departments of various industries in combination with the actual situation. Every year, middle and high-level personnel need to complete at least 72 hours, including at least 24 hours in public courses and at least 48 hours in professional courses.
〈〉〉〉〉〉〉〉〉〉〉〉〉〉〉〉〉 12
Hello!
It will be fine if relevant continuing education courses are offered locally within one year.
(3) How many hours does it take to evaluate the professional title and continuing education of senior engineers?
It varies from place to place, so you can only consult the relevant departments of the local human resources and social security bureau.
Have the professional title evaluation and continuing education hours of engineers been completed?
Assistant engineers should continue to receive education every year during their promotion to intermediate engineers.
Evaluation principle of intermediate engineer
The basic requirements stipulated in the Regulations on the Trial Implementation of the Positions of Engineering and Technical Personnel:
As an engineer, you should meet the following conditions:
1, which meets one of the following departmental conditions
(1) production and technical management department
Master the methods of modern production management and technical management, and have the ability to solve complex technical problems independently.
(2) be able to flexibly use the basic theoretical knowledge and professional technical knowledge of this major, and be familiar with the current situation and development trend of this major at home and abroad.
(3) Have some practical experience in production technology management, and obtain practical technical achievements and economic benefits.
(4) To guide the work and study of assistant engineers.
(2) research and design department
(1) has the ability to independently undertake the research and design of complex projects, and can solve complex technical problems within the scope of this major.
(2) master the basic theoretical knowledge and professional technical knowledge of this major systematically, and be familiar with the current situation and development trend of this major at home and abroad.
(3) Have some practical experience in engineering technology research and design, be able to absorb and adopt advanced technologies at home and abroad, and have made certain achievements in improving the research and design level and economic benefits.
(4) To guide the work and study of assistant engineers.
2. After obtaining a doctorate, pass the inspection; Get a master's degree or a second bachelor's degree, and have worked as an assistant engineer for about two years; Obtained a bachelor's degree or graduated from a university, and worked as an assistant engineer for more than four years; Graduated from university and worked as an assistant engineer for more than four years.
In line with the above conditions, the unit shall apply to the higher authorities. When organizing the review, the materials submitted by the review object shall be bound into volumes in the following order (if there are many materials, they can be divided into two volumes):
(1) material list;
(2) academic certificate (copy) 1 copy;
(3) Professional and technical post qualification certificate (copy) 1 copy;
(4) Letter of appointment (or letter of appointment) 1 set;
(5) Foreign Language Examination Certificate (photocopy) or 1 copy of Foreign Language Examination Exemption Examination Form (Annex 5) or Foreign Language Examination Achievement Examination Form (Annex);
[6] Computer application ability examination certificate (copy), 0 copies of graduation certificate or ID card of computer major over 65438+45 years old, which belongs to the test-free object;
(7) 1 Copy of unit rotation file or salary transfer form (attached with rotation unit or shunt personnel);
(8) Approval form for recommending senior and intermediate professional and technical positions (attached table) 1 copy;
(9) Personal professional and technical work summary (printed version) 1 volume;
⑽ 1 set of professional and technical personnel assessment form (the staff of public institutions are the annual assessment registration form of public institutions) (the annual assessment form of recent two years);
If you want to start with the following materials, the binding order is as follows:
(1) material list (this volume);
(2) Papers, treatises or research reports (copies). For published papers and works, the cover and catalogue of 1 publication shall also be provided;
(3)1set of research results (copies);
(4) 1 set of project award certificates (copy).
The following materials do not need binding:
(1) 3 copies of Qualification Evaluation Form for Professional and Technical Positions (printing and copying are not allowed);
(2) The Comprehensive List of Qualified Persons for Recommended Engineers (Attached Table 8) shall be made of B4 paper in 25 copies;
(3) The original certificate of passing the foreign language examination, or 1 copy of the Foreign Language Exemption Examination Form or the Foreign Language Examination Score Examination Form (the content is the same as the bound volume);
(4) The original certificate of computer application ability examination, or a copy of graduation certificate of computer major, or a copy of ID card 1 over 45 years old;
5] 1 approval form for recommending senior and intermediate professional and technical positions (the content is the same as that in a bound book);
[6] If there are many papers or authors submitted, please select one as a representative and indicate it.
How to deal with the hours of continuing education in the evaluation of "Wu" engineer's professional title?
1, the required class hours. To apply for intermediate qualification and assess the continuing education hours for nearly four years, the total hours must reach 288 hours, including public courses and professional courses.
Public courses need to complete the learning content required by the Human Resources and Social Security Department of the autonomous region during the verification period, and the academic qualifications higher than the prescribed academic level or the second academic level during the verification period of continuing education can be regarded as continuing education.
2. The continuing education of professional and technical personnel is divided into public subject training and professional subject training, mainly through centralized training, academic exchanges, seminars, technical visits and online distance education.
The contents of public demand subjects mainly include policies and regulations, national conditions and market conditions, modern information technology, professional ethics, intellectual property rights, etc. Professional subjects mainly include the reform of primary and secondary schools and vocational and technical education, the application of advanced medical technology, the popularization of modern agricultural technology, and the research of energy-saving and environmental protection projects.
3, professional and technical personnel to continue education assessment to implement the school hour system and credit system management.
Professional and technical personnel with senior or intermediate titles receive continuing education for a total of no less than 86 hours each year, including no less than 60 hours for professional subjects and no less than 26 hours for public subjects; Professional and technical personnel with junior titles shall have no less than 74 hours per year, including 52 hours for professional subjects and 22 hours for public subjects. Each class lasts 45 minutes.
4, to participate in the study and training of personnel in the completion of the prescribed class tasks, must take the examination of professional subjects and public subjects.
According to the percentage system, only when the scores of professional subjects and public subjects reach 60 or above can they be determined as qualified. After passing the examination, the Provincial People's Social Welfare Department will issue a unified standard certificate of continuing education for professional and technical personnel.
Lu: How many hours does it take to evaluate the title and continuing education of senior engineers?
Professional title hours, officially called "Nanjing professional and technical personnel continuing education hours", is a necessary condition for applying for middle and senior professional titles. When sending materials every year, you need to have a class verification form printed and stamped by the Human Resources and Social Security Bureau where the unit is registered, which represents the successful completion of the phased continuing education of your grade title. This is the basic concept of professional title hours. I will popularize some related knowledge for you in the next few hours:
Intermediate needs 160 class hours: 20 public courses, 140 professional courses.
Intermediate level needs 360 class hours: 20 public courses and 340 professional courses.
According to the regulations, you don't need to attend a little class every year, you can finish it at one time.
Many people mistakenly think that the hours of continuing education are in line with the regulations: intermediate students need to take 40 courses every year, and advanced students need to take 72 courses every year, so they can't take more courses. Here, I want to emphasize to you that this is not the case. Continuing education hours can be completed at one time, without having to take a class every year, which is both troublesome and time-consuming! Learn more about continuing education.
What should I do as the first step in learning?
When deciding to evaluate professional titles, intermediate 160 class hours and advanced 360 class hours must be fixed before the end of the annual professional title declaration. Then you need to register the account password of Nanjing professional and technical personnel continuing education management system as the first step of learning. It is a system that must be registered when studying formally. If you ask Mr. Xiong to fix it for you, just give me the account password of this system, so you don't have to attend class and worry about it yourself. The hours of repair will be displayed in the system, and then we will send it to you for review, and then you can evaluate the title. You only need to go to the human resources and social security bureau where the company is registered to print the working hours approval form, which saves time and effort. ! !
You can participate in the class verification form on your behalf.
If the class hours are completed, the human resources and social security bureau of the place where the unit is registered will also be approved after the class hours are submitted for review. Do I have to pick up the class checklist in person? No, you can replace it. Because as engineers, many people travel all the year round and have no time to take them. At this time, they can entrust others to get it. The materials to be provided are: the original ID card of the client, the original ID card of the client and the power of attorney.
"Qi" declared the title of engineer, did the hours of continuing education increase again?
To declare once a year, it is necessary to prove the hours of continuing education. Professional and technical personnel receive version continuing education for no less than 80 hours each year, including no less than 56 hours for professional subjects and no less than 24 hours for public subjects (45 minutes is 1 hour). During the continuing education year, the study time can be used centrally or dispersed. The conversion of credits and hours in the industry departments that have implemented the credit system shall be formulated by the competent departments of various industries in combination with the actual situation. Every year, middle and high-level personnel need to complete at least 72 hours, including at least 24 hours in public courses and at least 48 hours in professional courses.
How many hours does it take to comment on intermediate engineers?
This policy is different every year. According to the new regulations, middle school students in Zhejiang Province complete 27 hours of continuing education within two years. Senior engineers need to complete 180 class hours; If you want to evaluate China students, this is the most basic, as well as the performance of the paper and so on. The process is very complicated. You can find Dacheng Education to evaluate them, and I will go to their home to evaluate them. Everything goes well, once and for all.
After passing the examination, how many hours of continuing education will the first-class construction engineer enter into the professional title evaluation?
I am from Beijing. I called 12333 to inquire about this matter before. Official reply: After obtaining the first-class constructor, I think you have the title of engineer. You can apply for a senior engineer after a certain number of years, but you will not issue a professional title certificate separately.
The Regulations on Continuing Education for Professional and Technical Personnel stipulates that the total hours of continuing education for professional and technical personnel shall not be less than.
There should be no less than 90 class hours per year. Candidates who take the higher education self-study exam can apply for the self-study college and undergraduate respectively, or they can apply for the same major at the same time. However, you must obtain a junior college diploma before you can receive an undergraduate diploma (those who have obtained all the qualified scores stipulated in the junior college and junior college examination plan at the same time can go through graduation procedures at the same time).
All kinds of college graduates applying for the self-study examination must hold the original and photocopy of their graduation certificate to apply for the undergraduate courses permitted by the prescribed conditions.
(10) How many hours does it take to continue education and expand reading for engineers' titles?
Candidates who take the self-study examination for higher education can apply for the self-study college and undergraduate respectively, or they can also apply for the college and undergraduate of the same major at the same time, but they must obtain the college diploma before they can receive the undergraduate diploma (candidates who have obtained all the qualified scores stipulated in the college examination plan at the same time can go through the graduation formalities at the same time).
All kinds of college graduates applying for the self-study examination must hold the original and photocopy of their graduation certificate to apply for the undergraduate courses permitted by the prescribed conditions.