In life, more and more people will use responsibility letters, and signing responsibility letters can effectively enhance our consciousness and initiative. You had no idea when you drafted the responsibility book? The following is the responsibility book (generally 6 books) of construction safety production target management that I collected, hoping to help everyone.

1 The responsibility book of construction safety production management aims to implement the national laws and regulations on construction safety production such as the Construction Law, the Safety Production Law, the Regulations on Safety Production in Construction Projects and the Decision of the State Council on Further Strengthening Safety Production, effectively implement the responsibility system with the principle of "safety first, prevention first and comprehensive management", and strengthen the construction site with more powerful measures and a more pragmatic style. In order to achieve the company's safety production management objectives, the responsibility objectives are implemented layer by layer. Now, we have signed a 20XX annual target management responsibility letter for safe production with various project departments. The details are as follows:

I. Management objectives

1, put an end to general accidents and above production safety accidents. Put an end to major mechanical accidents, major fire accidents and acute poisoning accidents. The frequency of young people's work-related injuries should be controlled within 3‰, and the annual accident rate of serious work-related injuries and deaths is zero.

2. Actively promote the project department to create provincial and municipal civilized demonstration sites. In accordance with the Regulations on the Management of Civilized Construction Sites and the Standard for Safety Inspection of Construction (JGJGJ 59-2011), the standardized management of safety and quality of construction and civilized construction will be promoted, and the compliance rate of civilized construction will reach 100%.

3, civilized construction management objectives

Its jurisdiction ensures the completion of 1 above provincial safety and civilization demonstration sites.

Second, the measures and requirements

1, the project department shall set up a safety management leading body in accordance with the provisions of the Measures for the Establishment of Safety Production Management Institutions and the Staffing of Full-time Safety Personnel in Construction Enterprises issued by the Ministry of Construction. If the total construction area of the project exceeds 1000 square meters, it must be equipped with 2 ~ 3 full-time safety officers, and if it exceeds 50,000 square meters, a safety management unit shall be set up.

2, the project intends to set up a leading group for production safety on the construction site, adhere to the ten-day inspection system. At the weekly meeting, safety production analysis and research must be carried out at the same time to solve the problems existing in safety production work on the construction site and arrange and implement various safety management work in time.

3, clear responsibilities, implement the post safety production responsibility system, clear the project manager is the first responsible person of the project safety production post responsibility system, and decompose the post safety production responsibility layer by layer, so that the responsibility is clear, the measures are effective and implemented to people.

4. Strictly implement enterprise safety management rules and regulations, and ensure the investment of safety and civilized construction measures in accordance with the Measures for the Administration of Safety and Civilized Construction Measures for Construction and Installation Projects of the Ministry of Construction. Increase investment in safety protection facilities and equipment, and strictly control unqualified safety protection articles and eliminated mechanical equipment entering the construction site.

5, improve the overall safety management quality of the project intends to, the project manager, full-time security officer must go through safety training examination, examination qualified before mount guard.

6. Carry out the activity of "caring for life and paying attention to safety" to create a civilized construction site, adhere to the principle of "people-oriented", improve the working conditions and living environment of workers, eliminate environmental pollution, and improve the safety culture concept and civilized behavior consciousness of all employees.

7. Conscientiously implement the mandatory provisions and standards for safety production in engineering construction, organize an on-site self-inspection every ten days, implement the measures of "three determinations and one implementation" for potential accidents, strengthen the accident control of scaffolding, formwork support, foundation pit enclosure, lifting machinery injury, falling from high altitude, and pay close attention to safety protection measures such as "three treasures and four mouths" and construction electricity. In the event of an accident, we must adhere to the "four don't let go". Seriously implement the safety accident reporting system.

8. Carry out in-depth safety compliance activities on the construction site and take effective measures to ensure the full implementation of safety standards. We should take effective preventive measures. According to the company's "Atlas of Safety Protection and Civilized Construction Implementation on Construction Site" and "Demonstration Atlas of Safety and Civilized Construction Standards in Fujian Province" standards.

9, vigorously do a good job in safety education and training, in order to improve the broad masses of workers' concept of safety in production, enhance self-protection ability, abide by various safety operation procedures, and strictly implement the system that special operations personnel must hold relevant certificates.

10, emergency rescue plan for production safety shall be formulated, and emergency plan drills for safety accidents shall be carried out regularly.

1 1. The company will regularly assess the implementation and implementation of safety production target management of each project management department, organize the assessment at the end of the year, and give a notice of praise to the project department that has completed the management target. Won the title of provincial civilized construction demonstration site, giving greater economic rewards. Informed criticism will be given to those who have not completed the project, and an economic penalty of 1 1,000 ~11,000 yuan will be given according to the relevant regulations of the company. For mismanagement, causing casualties, it will be handled in accordance with the provisions of Articles 62, 64 and 66 of the Regulations on the Administration of Construction Project Safety Production.

12, this responsibility book is the responsibility book of 20XX annual safety production target management, which serves as the basis for organizing the year-end assessment.

This responsibility letter shall come into effect after being sealed by the company, signed by the enterprise legal person and signed by the project managers of various management departments.

Company seal:

Project department:

20XX year XX month x day

Responsibility letter for target management of construction safety production 2 In order to further strengthen safety precautions, ensure construction safety and prevent all kinds of production accidents, all staff of the project department and all construction units must conscientiously implement the following safety production management measures:

First, actively strengthen safety production leadership, strengthen internal management, formulate practical safety rules and regulations, and earnestly put safety work in the first place.

1. Safety in production should be linked with bonus distribution and striving for Excellence, and the "one-vote veto system for safety in production" should be implemented.

2, each type of work, each team should formulate the corresponding safety operation procedures and practical safety measures, each do their own thing, who has a problem shall be investigated for responsibility, and will not be tolerated.

3, at work, especially the special type of work operators, must hold relevant certificates, it is forbidden to work after drinking, in strict accordance with the operating procedures, wear labor protection articles, put an end to violations of operating procedures.

4, strengthen the maintenance of construction machinery and vehicles, strengthen the management of electricity consumption, and do a good job of rain, flood, fire and theft.

5, take effective measures, resolutely implement the principle of who is in charge who is responsible, strengthen the safety knowledge education for temporary workers (labor cooperation personnel), so that they can establish self-protection and prevent others from being hurt.

6, the construction team should strengthen the safety management of the project, in strict accordance with the safety operation procedures, strictly control the safety in production.

7, do a good job in the worker's food hygiene and safety, to ensure the health of workers.

8, regular or irregular safety inspection, found that the problem timely rectification.

Second, improve safety facilities and measures

1, adhere to the principle of "prevention first, combining prevention with control". The inventory materials such as cement and admixture of the construction unit shall be waterproof, waterproof, fireproof, moisture-proof, explosion-proof and leakage-proof according to the physical and chemical properties of the materials.

2, concrete mixing station must be equipped with perfect fire equipment, strengthen the management of electricity, in case of fire, endanger personal and property safety.

3, for aerial work personnel, must be equipped with seat belts and set up the necessary safety net, and often check the quality and tolerance of seat belts and safety nets.

4. Important construction sections and construction sites must be hung with safety warning signs. At intersections and overpasses, reflective warning signs or hanging indicator lights should be erected to remind drivers to drive at a limited speed and pay attention to safe operation.

5. For key parts such as landslide-prone sections, bridges and viaducts, the project manager department should assign special personnel to take charge of safety production, strengthen the management of construction personnel, and ensure no hidden dangers.

Third, strengthen the labor protection of employees.

According to the specific conditions of construction, it is required that steel workers, riggers and concrete workers must be equipped with labor protection gloves and wear-resistant rubber shoes, and cement unloading workers should be equipped with special work clothes and masks to strengthen the health protection of workers. For electricians, equipped with safety belts and high-voltage insulating shoes.

Fourth, actively carry out power consumption publicity activities, assign special personnel to regularly measure the insulation degree of safety equipment and lines, carry out net cleaning inspection, test and maintenance of electrical equipment, and strengthen the management of mobile and handheld electrical equipment. Switches and power switches cannot be set in the open air.

Five, increase the management of construction vehicles and other mechanical equipment.

1. Organize drivers to hold regular safety meetings, learn and convey relevant traffic driving and management knowledge, and further enhance drivers' sense of responsibility.

2, strictly implement the "road machinery warranty, it is forbidden to take the car on the road in spite of illness" rules and regulations.

3, to ensure that the site construction vehicles obey the scheduling, abide by traffic laws and regulations, to ensure traffic safety, it is forbidden to unlicensed vehicles on the road.

Six, strictly monitor the use and management of explosives.

Using a legal blasting team, the relevant qualification certificates of the blasting team and personnel must be inspected by the local police station, district and municipal public security departments before blasting operations can be carried out and registered for the record. When the blasting team receives explosives, it must be approved by the general office of the project department to open the letter, signed by the project manager and checked and sealed by the police station; If the amount of explosives is above 100 kg, it must be reported to the Public Security Division of the Regional Bureau and the local police station, and the above departments will send personnel to inspect the blasting procedures on the spot and supervise the evacuation of passing people and vehicles; All unused explosives must be sent to the explosives management station of the local police station for storage before 6: 00 pm that day, and then extracted when used the next day.

Seven, strengthen on-site management

It is necessary to ensure that no other safety accidents occur in the responsibility area.

Eight, the project department must complete the following production safety indicators:

1, extraordinarily serious traffic accident (greater than or equal to 50%):

2. Major fire accidents:

3. Major accidents of boilers and pressure vessels:

4. Major power accidents:

5. Major theft accident:

6. Signing rate of safety target responsibility book: 100%

7. Fatal accidents caused by the construction site and responsible departments:

8. Industrial accident mortality rate of construction sites, mixing stations and prefabricated sites:

9. The serious injury rate of industrial accidents in the construction site, mixing station and prefabrication yard: 0.24%.

10, the crime rate of employees (above public security detention) shall not exceed 0. 1% of the total number of employees.

1 1. Incidence rate of criminal cases: 0.5%.

12, and the certificate-holding rate of special jobs: 100%.

13, allocation rate of safety labor protection articles: 100%.

14. The success rate of handling internal contradictions and disputes in the project department reached 100%, so as to prevent the occurrence of collective petitions and mass incidents in the case of transferring people to criminal punishment.

15, safety education, inspection times, more than once a month.

At the end of the year, if one of the above-mentioned indicators is not completed after inspection and assessment, the construction team that failed to meet the safety production in that year will be punished according to the relevant regulations and the advanced qualification will be cancelled.

XXXX construction group co., ltd

20XX year XX month x day

Construction safety production target management responsibility book 3 In order to implement the safety responsibility system and fully realize the safety work goal of the project management department, we signed the following safety production target responsibility book with the technical assistant manager of the project management department:

I. Objectives:

Put an end to major casualties, equipment accidents and fire accidents; The rectification rate of major hidden dangers is 100%, and the rectification rate of general hidden dangers is over 98%; The three-level safety education rate of workers entering the site reaches100%; The certificate-holding rate of special operators is 100%.

Second, the responsibilities and requirements:

1, responsible for all technical problems in the construction and production of the project. Take technical responsibility for safety leaders.

2, responsible for organizing the preparation of construction organization design (or construction scheme) and construction safety organization design. According to the characteristics of engineering construction, the relevant personnel shall be given written disclosure and acceptance of partial safety technology. Both parties shall perform the signing procedures.

3, responsible for dealing with technical problems related to production safety. Participate in safety inspection and industrial accident analysis meeting, and put forward technical appraisal opinions and rectification measures.

4, responsible for employee safety technology education. Responsible for the technical innovation of traditional safety protection technology, overcome technical difficulties and improve working conditions.

5. Establish safety technical files. All safety technical data in the industry must be complete and accurate, and the content should be comprehensive and true.

6. Strictly implement safety production rules and regulations; Command and stop illegal and risky operations.

7. Be responsible for the environmental safety of the construction site and the completeness, integrity and effectiveness of all safety protection facilities, and whether they meet the safety technical requirements. Participate in the acceptance of safety protection facilities, large mechanical equipment, temporary electrical equipment, outriggers (including lifting, hoisting, hanging and climbing), derricks, safety nets, hanging baskets and other projects in construction and production.

8, inductrial injury accident or major attempted accident should be reported immediately, and protect the scene, to participate in the accident investigation and handling.

Third, the assessment method:

For the assessment of the target responsibility system of construction managers, the branch conducts quarterly assessment according to the Assessment Form of Target Responsibility System for Construction Managers and the Assessment Form of Responsibility System, and gives praise, reward or criticism and economic punishment to the assessment according to the relevant regulations of the company.

Four. Other requirements:

This responsibility letter shall come into effect as of the date of signing, in triplicate, one for the branch, one for the project department and one for the deputy project technical manager.

Person in charge:

20XX year XX month x day

Responsibility Letter for Management of Construction Safety by Objectives 4 According to the spirit of Wenzhou Education Bureau's Emergency Notice on Immediately Carrying out Construction Safety Inspection of Projects under Construction (Wen Han [20 _] 21KLOC-0/No.), in order to further strengthen the construction safety management of projects under construction, improve various safety protection facilities, prevent and reduce production safety accidents, ensure personal and property safety, maintain social stability and build a harmonious society, according to People's Republic of China (PRC).

1. The legal person of the construction general contractor is fully responsible for the safety production of the project under construction according to law, and is the first person responsible for safety production. Construction shall be carried out in strict accordance with national standards to ensure project quality and safe production.

2, should establish and improve the responsibility system for production safety and safety education and training system, formulate rules and regulations for production safety and operating procedures, to ensure the investment of funds required for safe production conditions, to undertake regular and special safety inspections of construction projects, inspection found hidden dangers or illegal operations should be promptly closed for rectification. If there is a big potential safety hazard, it must be reported to the safety management department in time, and measures should be formulated and implemented in time.

3, set up a leading group for production safety, improve the safety production management network, in accordance with industry standards and norms to organize the implementation. With the progress of the project, all safety protection facilities will be in place in time. Temporary facilities such as roads, temporary fences, gates, fire-fighting facilities, temporary electricity consumption and offices on the construction site must meet the requirements of standardized construction.

4. It is necessary to establish a responsibility system for fire control safety on the construction site, determine the person responsible for fire control safety, formulate various fire control safety management systems and operating procedures such as using fire, electricity and inflammable and explosive materials, set up fire control water sources, equip with fire control facilities and fire extinguishing equipment, and set up obvious signs at the entrance of the construction site.

5. The chief engineer, technical director, full-time safety officer and special type of work personnel should have corresponding qualifications and hold relevant certificates. Set up a full-time security officer to take part in the safety production activities of the project department, preside over the safety production work of the team, and establish a safety account in time.

6, safety protective equipment must be purchased with production license and product registration certificate, the indicators should meet the qualified standards, it is strictly prohibited to unqualified protective equipment into the construction site.

7. The team members are relatively fixed, social idlers or unidentified personnel are not allowed to join the team at will, and personnel without "three certificates" are not allowed to enter the construction site.

8. We should conscientiously carry out the "three posts and one evaluation" safety activities and conduct regular or irregular safety education for employees.

9. Special types of work must be operated by personnel with valid professional certificates, and it is forbidden to operate all equipment of other types of work without authorization.

10, the construction unit shall effectively isolate the construction site with a solid wall not less than 1.5m, and set warning signs to prevent irrelevant personnel, especially students, from entering the construction site, so as to ensure the personal safety of teachers and students.

1 1. The construction passage should be separated from the student passage. If there are special circumstances, it is necessary to ensure that the peak hours of students' classes and schooling are staggered to ensure the personal safety of teachers and students.

12, the construction unit to strengthen the prevention around the mud pool, set up protective measures and set up safety warning signs, it is forbidden to students near.

13, the construction unit must pay attention to the safety of construction electricity. The thread ends should not be exposed, and the distribution box should be hung, not on the ground or where students can reach it.

14, in strict accordance with the relevant provisions of the state to do other safety work.

15. This Safety Responsibility Letter is made in duplicate, one for each party, and shall come into effect as of the date of signature.

Person in charge:

20XX year XX month x day

5 Party A's Responsibility Letter for Target Management of Construction Safety Production:

Party B:

In order to further implement the safety production policy of "safety first, prevention first", strictly enforce labor protection and safety production laws and regulations, strengthen safety production management, implement the responsibility system for safety production, strictly manage the construction site according to law, ensure the safety and health of workers on the construction site, and promote the smooth progress of construction, this agreement is hereby signed:

I. Management objectives:

1, put an end to major safety accidents, and industrial accidents are zero;

2, serious injury frequency control is zero, wounded frequency control is zero;

3. The rectification rate of on-site safety hazards must be guaranteed to reach 100% within the time limit to prevent the occurrence of major on-site hazards;

4. There is no fire accident on site, and the rectification rate of fire hazards must be guaranteed to reach100% within the time limit;

5. No falling accident occurs, and all workers are guaranteed to wear protective measures or make protective fences.

The managers of all departments are the first responsible persons of food hygiene in their own departments. Be directly responsible for the environmental sanitation and food hygiene in the area under its jurisdiction, and have the responsibility and obligation to organize all employees to seriously study and implement the terms listed in this responsibility book.

6, no major poisoning accidents and mass infectious diseases;

Do a good job in the daily management of students, prohibit the occurrence of fighting and prevent students from committing crimes; In particular, it is necessary to stop students from interacting with idlers outside school and resolutely put an end to group fights.

7, must ensure that the construction site to create a civilized and safe construction site;

Second, the safety production requirements

1. The construction party shall take strict safety protection measures in accordance with relevant regulations, otherwise, the responsibility for accidents caused by poor safety measures and the expenses arising therefrom shall be borne by the construction party itself. For casualties caused by the responsibility of the construction party, the construction party shall bear the responsibility and related expenses;

2. The construction party shall be familiar with and consciously abide by Party A and Party A's construction site safety management and related specifications; Consciously abide by the local government's regulations on safe construction and the laws, regulations, norms, standards and regulations on safe production promulgated and implemented by the competent department of industry, actively participate in various activities related to promoting safe production, and effectively protect the safety and health of construction site personnel;

Effectively improve teachers and students' awareness of "Ten Preventions" in fire prevention, drowning prevention, earthquake prevention, lightning protection, disease prevention, virus prevention, flood control, traffic injury prevention, food poisoning prevention and personal injury prevention, and have basic "Ten Preventions" common sense and skills in preventing safety accidents.

Regular inspection: safety functional personnel, project management department and safety officer on duty should often go deep into the construction site to carry out preventive inspection, find hidden dangers in time, eliminate hidden dangers and carry out standardized construction normally.

3. The construction party must respect and obey Party A's current rules, regulations and management methods related to production safety, strengthen its own management according to the relevant provisions of the economic contract, and fulfill Party B's responsibilities.

Three, the construction site safety requirements:

1. The construction party must humbly accept Party A's various safety hazards investigation, safety management standards and rectification regulations, establish its own regular and irregular safety production self-inspection and investigation mechanism, and strictly implement it; Otherwise, losses such as fines shall be borne by the construction party.

2, the construction party must strictly implement safety protection measures, personal labor protection articles regularly quantitative supply; The construction party shall bear all economic and legal responsibilities for safety accidents or industrial accidents caused by the construction party.

3. The construction party must take all strict preventive measures that meet the safety standards to ensure the safety of all construction sites, and there must be no dangerous situations that endanger the personal safety and health of the company and other construction party personnel, and ensure that all personnel on the construction site or those nearby are free from all possible dangers on the construction site. Otherwise, the contractor shall be responsible for all consequences.

4, the construction site and construction personnel's operating place, must be in strict accordance with the national and government regulations of production safety and civilized construction standards to do a good job of protection, to ensure that construction personnel have a safe, reliable and hygienic working environment, it is strictly prohibited to illegal operation, illegal command; For those who do not meet the safety regulations and operate illegally, Party A's safety management personnel have the right to request to stop work and make mandatory rectification to make them meet the safety standards, and the required expenses shall be deducted from the project payment of the construction unit.

5. All important labor protection articles must be purchased according to national standards. Such as: safety helmet, safety belt, safety net, leakage protector, welding machine secondary line protector, distribution box, five-core cable, scaffold fastener, etc. The construction party shall provide necessary and effective safety articles, such as safety helmet and safety belt. For on-site construction personnel, if necessary, wear personal protective equipment such as masks, eye masks, ear protectors and insulating gloves; If the protective equipment of the construction party does not meet the requirements or the safety protective equipment is not in place, the construction party shall be responsible for all the safety accidents caused.

When purchasing food, Party B must ask the supplier for the corresponding procedures. Food business operators shall keep all the procedures (copies) provided by suppliers for more than two years for future reference.

6. The construction party must designate at least one qualified and experienced safety personnel to be responsible for the implementation of the safety plan and protective measures. And communicate with Party A's safety management personnel.

Conscientiously carry out teacher's ethics education, combined with the actual situation of teachers in six primary schools, so as to be targeted and take measures, and the school and teachers signed a letter of responsibility for rectification. Combined with the implementation outline of civic moral construction, teachers should be carefully organized to study the Code of Conduct for Professional Ethics of Primary and Secondary School Teachers, the Compulsory Education Law, the Teacher Law and the "Ten Banners" of the city's teachers proposed by the Education Bureau, so as to set up a typical teacher who loves his life as a child, establish a new relationship between teachers and students with understanding, respect, trust and tolerance, and earnestly strengthen the construction of teachers' professional ethics. Put an end to teachers' corporal punishment or corporal punishment of students in disguised form.

7. The construction party shall organize the construction in strict accordance with the fire safety management system of Party A and the special requirements of the construction site, and accept the safety inspection of Party A. The construction party shall immediately rectify the hidden dangers issued by Party A within the time limit specified by Party A. If the rectification fails to meet the requirements of Party A, Party A has the right to impose economic penalties on the construction party according to regulations.

Employees engaged in on-site construction should be healthy and can meet the safety requirements of on-site operation. If they suffer from serious illness or physical discomfort, they should stop working and quit the site construction.

8. In case of disasters and accidents such as cases, fires and traffic accidents (including the construction site) caused by the poor management of the construction party, ineffective self-prevention measures or the responsibility of the construction party, the construction party shall bear the economic responsibility, legal responsibility and after-treatment of the accidents alone, so the construction party shall be responsible for compensating and punishing the economic losses caused to Party A. ..

Four. Other supplementary terms:

1. Therefore, chemicals and inflammable and explosive dangerous goods entering the factory must be registered in the East Gate Police Office, indicating their purposes, places of use, and protective measures taken by the construction party and the safety supervisor. Otherwise, the contractor shall be responsible for all consequences.

2 The use of open flame in the construction site must have a hot work permit and must be registered, and the protective measures and safety person in charge of the hot work site must be indicated. Otherwise, the contractor shall be responsible for all consequences.

3. Temporary electricity consumption on the construction site must be registered in the transformer room, which is overlapped by professional electricians. The construction party shall not connect temporary wires without permission, otherwise the construction party shall be responsible for all the consequences.

Verb (abbreviation of verb) Agreement number This agreement is made in duplicate, with each party holding one copy.

Strict safety technical disclosure and serious implementation of safety technical measures are important guarantees for implementing the policy of safe production, reducing industrial accidents and realizing safe production. In order to ensure safety in production and run safety through the whole production process, the following safety technical disclosure system is formulated according to the actual situation of this enterprise:

6. The validity period shall take effect from XX to the end of construction (the contract deadline).

Party A:

Party B:

20XX year XX month x day

In order to strengthen the work of safe production in construction and implement the responsibility system for safe production in accordance with the requirements of industry management, the Municipal Construction Management Bureau decided to sign a letter of responsibility for safe production targets with the company undertaking the project construction.

I. Work objectives

1, conscientiously implement the laws, regulations, documents and meeting spirit of the superior on safety production, and organize the implementation of the safety production control objectives of the unit; Put an end to major accidents and control and reduce the occurrence of general accidents.

2. In the construction preparation stage, sign the responsibility book of layers of safety objectives with the legal representative of the enterprise as the core, formulate and improve the rules and regulations of safety production, prepare the targeted safety construction organization design, and make standard settings for supporting roads, fences, construction electricity and necessary temporary facilities and equipment; Hold a mobilization meeting for construction projects, improve the safety production management organization, clarify the tasks and responsibilities to everyone who enters the site, and implement ideas, organize personnel, protective measures and facilities.

3, the construction stage, completes the safety technical disclosure, to carry out pre-job training and education, to fulfill the signing formalities; Analyze and solve the problems of safety production, and implement the necessary funds for safety production; Regular or irregular production safety inspection. The first responsible person or the leader in charge will lead a team to check the safety of the construction site at least twice a month, and inspect the construction site every day. The hidden dangers found will be tracked and rectified by special personnel at regular intervals and recorded; Implement safety measures in strict accordance with the requirements of "one standard and three specifications" such as safety management, civilized construction, scaffolding, foundation pit support, formwork engineering, electricity consumption for "five rooms and four mouths" construction, material lifting, external elevators, tower cranes, hoisting and construction machines; And in accordance with the provisions, do a good job of inspection, acceptance and signature before use of divisions and disciplines.

4. Implement the principle that production must be managed safely, and arrange safety production work while arranging production and business activities. Strict rewards and punishments are cashed, and accidents are reported in time; Establish all kinds of safety production management data for inspection; Complete other safety tasks assigned by superiors.

Second, the assessment method:

1, take the implementation of responsibilities as one of the basis for selecting advanced civilized construction sites, construction enterprises and construction personnel for annual assessment, and reward and punish them as appropriate.

2. If the hidden dangers of accidents or accidents fail to meet the work objectives, rectification within a time limit, suspension of construction rectification, informed criticism, fine until the license is revoked, demotion and disqualification shall be given as appropriate.

This responsibility book is made in triplicate, one for the Municipal Construction Management Bureau, the construction unit and the Project Department. Only after signing the responsibility book can the construction permit be issued.

Responsible unit (official seal)

Legal representative:

Project manager:

20XX year XX month x day

;