Furnace leakage
If water marks or cracks are found on the surface of the furnace body, stop the furnace immediately and contact the supplier or after-sales service for treatment.
Fault code display
The control panel of Faruoli wall-hung boiler has self-diagnosis function. When a problem is detected, the corresponding fault code will be displayed. If a fault code appears, you should contact after-sales service or the supplier for help.
Cannot start or hot water temperature is low.
If the furnace can't start, can't heat water or the temperature of hot water is low, check whether the power supply is normal first. If the power supply is normal, check whether there is a gas source, whether the air valve is open, and check whether there is leakage in the gas pipeline and water pipeline. If you still can't solve the problem, you need to contact after-sales service or suppliers for help.
imperfect combustion
If it is found that the burner flame is not blue, the flue gas smells or emits black smoke, check whether the oxygen supply is sufficient, whether the damper is normal and whether the fuel is sufficient. If the problem cannot be solved after inspection, you need to contact after-sales service or suppliers for help.
The stove makes a loud noise.
If the stove is noisy or noisy, first check whether the stove is installed securely. If the furnace is installed correctly and the noise still appears, you need to contact the after-sales service or supplier for help.