1 Enterprises and personnel are not allowed to (command against regulations) and (operate against regulations) and have the right to obtain (protect) materials.

2. Enterprises should establish a safety production (education and training) system.

Enterprises must manage production safety and implement the responsibility system for production safety.

Enterprises should maintain safety, guard against danger and prevent fire at the construction site.

After the accident, the relevant personnel shall immediately report to the person in charge of the unit, and the person in charge of the unit shall (immediately and truthfully) report to the local area.

5. The supervision and management department shall not (conceal) (falsely report) or (delay) destroy the scene or destroy the evidence.

6. When the unit carries out dangerous operations such as blasting and hoisting, it shall arrange special personnel (specialized personnel) for on-site management and observe safety measures.

Enterprises should maintain safety at (construction site) to prevent danger and fire.

8. The enterprise shall provide (safety protective articles) and (safety protective clothing) to the operators, and inform the dangerous posts in writing.

The hazards of operating procedures and illegal operations.

9. The general contractor shall be responsible for the implementation of the general construction contract.

10 protective equipment, machines, tools and accessories must be managed by (special person), regularly inspected, repaired and maintained, and established.

(Data) Archives shall be timely (scrapped) according to national regulations.

1 1 It is forbidden to smoke in places where there is a danger of fire and explosion, and it is forbidden to use naked flames. Go through the formalities according to the regulations, and take fire control safety measures when using fire.

Observe the (fire safety) regulations.

12 the principle of putting prevention first and combining prevention with fire fighting shall be implemented in fire fighting.

13 noise reduction measures shall be formulated on the construction site in accordance with Noise Limits of People's Republic of China (PRC) (Construction Site Boundary).

14 The expenses for safe working environment and safe construction measures included in the project budget shall be used for the procurement of (construction safety protection) appliances.

Update and implement safety construction measures and improve safety production conditions, and shall not be used for other purposes.

The rated current of 15 tamper leakage protector should not be greater than (15)mA, and the action time should not be greater than (0.1) s.

16 each electric construction machine and hand-held tool shall be equipped with a leakage protector, and the rated leakage current of the protector shall not be greater than (30)mA.

The rated action time is not more than (0. 1) s, and the action characteristic is 30mA.s The zero line of the leakage protection switch must be ...

17 mobile appliances must be used in rainy season (qualified).

18 welding site 10 meters are not allowed to put (oil, wood, oxygen bottles, acetylene bottles).

19 handle acetylene bottles or petroleum bottles with care, and do not throw, touch, slide or roll them.

The office and living area should be kept clean, and the garbage should be stored in (closed) containers, regularly (fly-killing) and promptly (removal).

2 1 Safety production management adheres to the policy of (safety first, prevention first).

22. According to regulations (control and treatment) of dust, waste gas and waste water in the county. Solid waste and noise. Environmental pollution caused by vibration and its harmful measures.

If two or more units operate in the same area, which may endanger the safety of the other party, they shall sign an agreement on safety production management to clarify their respective responsibilities and measures.

And formulate full-time safety production management personnel to carry out safety inspection and coordination.

The unit shall inform the operators (in advance) of the operation procedures of dangerous posts and the possible harm caused by illegal operation.

Article 13 of the Law on Work Safety stipulates that the legal responsibility of production safety accidents (responsible personnel) shall be investigated in accordance with the provisions of this Law and regulations.

26 independent safety ropes must be used for lifting the hanging basket, the rope diameter shall not be less than (12.5) mm, and the personnel shall wear safety belts. The load shall not exceed (120kg/m2).

27 scaffolding vertical pole spacing shall not be greater than (1.5) meters, longitudinal horizontal pole (main bar) spacing shall not be greater than (1.2) meters, transverse horizontal pole (small bar).

The spacing shall not be greater than (1) meters. The vertical deviation is not more than 1/2000.

28 Protective articles shall be provided by the Employer in accordance with the principle that whoever employs shall be responsible.

The three-level education is divided into (company level) (project level) (team level) safety education.

30 homework personnel should receive (safety education and training) before taking up their posts, and those who fail the exam are not allowed to take up their posts.

3 1 comply with (fire control) regulations and take (fire control) measures.

The commander's signal is (whistle) (gesture) (semaphore) (communication equipment).

Operators have the right to obtain (protective) supplies.

34 frog rammer must be operated by two people, and (insulating gloves) (insulating rubber shoes) must be worn.

35. Those who do not trust to set up safety management institutions and equip safety management personnel shall be ordered to make corrections within a time limit, and those who fail to make corrections within the time limit (suspend business for rectification) may be fined (20,000 yuan).

Unit 36 shall arrange design measures and temporary power utilization plan, prepare (special construction plan) for (dangerous) (professional) projects, and take (safety technology) measures.

37. Items are not allowed to be stored around the fire hydrant on the construction site (within 3 meters).

The living area should have necessary facilities and space, with a height of not less than (2.5m), a channel width of not less than (1) m, a bed (30cm) above the ground and a bed of not less than (2) m2.

39. The horizontal distance between the oxygen cylinder and the surplus and deficiency shall not be less than (5) meters, and the operation with naked flame shall not be less than (10) meters.

40 Fire extinguishing does not constitute a crime (warning, fine or detention for less than 15 days).

4 1 The unit shall (arrange) protective equipment and training (funds).

42 Safety measures and temporary electricity utilization agreement shall be implemented after being signed by the unit (technical director) (chief supervision engineer) and supervised by (full-time safety management personnel).

Safety facilities must be designed (constructed) (put into production and use) at the same time as the main project.

Accident report (immediately), report to (the person in charge of the unit) within (1) hours, and report to the local government in writing within 24 hours.

45. Establish a safety production (responsibility) system.

46 Sambo (safety helmet, safety belt, safety net) four (stairs, elevator wellhead, reserved hole, access opening) five limb (no railings around Yantai,

Around the roof without external frame protection, around the floors of the frame project, on both sides of the upper and lower runways and ramps, and on one side of the unloading platform).

Technologies and equipment that seriously endanger the production safety of the national team should be eliminated.

48. Wages and benefits shall not be reduced or (labor contract) terminated due to emergency shutdown or evacuation of personnel.

49. The unit shall set up obvious (safety warning) signs on the relevant facilities and equipment with greater risks.

50 scaffolder should (wear safety belt) and (wear non-slip shoes).

Select:

The person in charge of 1 is subject to criminal punishment (within five years) and may not be the person in charge.

If the unit should be liable for compensation, if it does not or the person in charge escapes, it will be enforced by the people's court.

If the unit does not meet the requirements and an accident or crime occurs, criminal responsibility shall be investigated according to law. If it is not serious enough, the investor shall be fined (more than 20,000 yuan but less than 200,000 yuan).

4. Whoever violates the regulations on production safety and has a serious accident shall be sentenced to fixed-term imprisonment or criminal detention (less than three years), and whoever is negligent (more than three years but less than seven years) shall be sentenced to fixed-term imprisonment.

Whoever forces others to take risks in violation of regulations and causes accidents shall be sentenced to fixed-term imprisonment of not more than five years or criminal detention, and shall be sentenced to fixed-term imprisonment of not less than five years.

Those who violate fire control regulations, make corrections after being notified, and refuse to implement them, thus causing consequences, shall be sentenced to fixed-term imprisonment of not more than three years or criminal detention.

7 detention (public security) departments for less than fifteen days.

There are (civil liability) (administrative liability) and (criminal liability) in the Production Law.

Administrative responsibility is the consequence that the state organ finds (the actor) illegal.

10 When hoisting and blasting, site safety management (special management personnel) shall be arranged.

The person in charge of 1 1 was detained in your place for less than (fifteen days) when something happened.

12 If the safety technical disclosure is not made before the construction, and the staff dormitory is set in the unfinished building, a fine will be imposed (more than 50,000 yuan100,000 yuan).

13 investigate and deal with compulsory illegal construction (criminal responsibility),

14. 15 The unit shall conduct at least one (annual) training (safety production education) for management personnel and operators. If you fail the exam, you can't go to work.

16 accident investigation follows the principle of seeking truth from facts and respecting science.

17 If an accident occurs due to subcontracting, (the subcontracting unit) shall bear the main responsibility.

18 safety measures and temporary electricity agreement shall be implemented after being signed by the unit (technical director) (chief supervision engineer) and supervised by (full-time safety management personnel).

19 unit (main person in charge) (project leader) (full-time safety production management personnel) takes up their posts after examination.

The rescue plan is prepared by (the general contractor).

2 1 A fine of 654.38+10,000 yuan but not more than 300,000 yuan shall be imposed on lifting machinery, scaffolding, formwork and jacking facilities that have not been accepted or are unqualified.

22. Equipment that endangers safety that has been explicitly eliminated or banned by the state shall be ordered to make corrections. If it fails to make corrections within the time limit, it shall be ordered to stop construction or suspend business for rectification and be fined (less than 50,000 yuan).

23. Special operations must be trained to obtain certificates (special operation qualifications), and those without certificates shall be ordered to make corrections. If it fails to make corrections within the time limit, it shall be ordered to stop construction or suspend business for rectification and be fined (less than 20,000 yuan).

After a major accident, report to the local government management department in writing (within 24 hours).

25 at night, the construction department must set (red warning light).

No unit or individual may damage, misappropriate, dismantle (fire control facilities), bury, occupy, block fire hydrants or occupy fire prevention spaces, and may not occupy, block or close dredging channels.

Fire escape, fire truck passage. Doors and windows in crowded places shall not be equipped with obstacles that affect escape and fire fighting and rescue.

27. The crane should not exceed the allowable weight (70%) when driving under load, and the height from the ground should not be greater than (500mm) mm ..

The Regulations on the Administration of Work Safety in Construction Projects have been adopted and promulgated at the 28th executive meeting in the State Council on June 6, 2003, and shall come into force as of February 6, 2004.

29. The width of the temporary fire lane on the construction site must be not less than 3.5m to ensure smooth flow. It is forbidden to pile up articles and materials in the driveway or occupy the temporary fire lane.

Within 30 days after the acceptance of the equipment and facilities of the unit, it shall register with the construction administrative department or other relevant departments, and the registration mark shall be placed in a prominent position of the equipment.

3 1 the inlet and outlet of the switch box of the distribution box should be at the bottom of the box, and it is strictly prohibited to be at the top, side, back or door.

The main person in charge of the unit is fully responsible for the safety production work of the unit.

33 The lighting under the wet or manual digging hole within 2.5 meters from the ground must be a safe voltage lamp below 36V.

Units should set up obvious (safety warning) signs on places, facilities and equipment with large risk factors.

Short answer:

1. What are the four mouths and five realms of Sambo?

Answer: Three treasures: safety helmet, safety belt, safety net, four openings: stairs, elevator wellhead, reserved holes and access openings. Five realms: there are no railings around Yantai.

Around the roof without external frame protection, around the floors of the frame project, on both sides of the upper and lower runways and ramps, and on the side of the unloading platform.

2. What are the four faults in the accident?

A: Those who failed to analyze the cause of the accident, those responsible for the accident and the people who did not receive education, those who failed to implement preventive measures and those responsible for the accident who did not accept the treatment were not spared.

3. What's the point of not hanging up?

Answer: 1 The weight of the hoisted object exceeds the allowable range of mechanical properties, and the signal is unclear. There are people under the hoisted object, people above the hoisted object, people buried in the ground, people pulling things obliquely, loose objects tied loosely, vertical members and large templates.

There are no snap rings, 9 scattered objects have no containers, and the weight of 10 lifting objects is unknown.

4. What should I pay attention to when dealing with emergency rescue on the spot?

Answer: 1 After the accident, the injured should be rescued. Take measures to prevent the accident from spreading. 2. Carefully protect the scene of the accident. Objects, traces and conditions related to the accident in Panyu shall not be destroyed. Rescue the injured.

When it is necessary to move some objects on the site, site signs must be made.

5. What is the emergency rescue plan?

A: The construction unit shall formulate its own emergency rescue plan for production safety accidents, establish emergency rescue organizations or equip emergency rescue personnel, equip necessary emergency rescue equipment and equipment, and organize drills regularly.

6. What are the fire protection requirements for electrical equipment?

Answer: 1 The electrical equipment used in the construction site must meet the fire protection requirements; Temporary power consumption must be equipped with overload protection device, and inflammable and explosive articles are not allowed in the electric box. 3 it is forbidden to overload the use of electrical equipment. 4 architecture

Exposed high-heat and strong light lamps, electric furnaces, rapid heating, etc. It shall not be used in warehouses, carpentry workshops, paint batching rooms and waterproof workplaces where flammable materials are stored on site.

7. How to do a good job of rescue after the accident?

A: After a production safety accident occurs in a production and business operation unit, the relevant personnel at the scene of the accident shall immediately report to the person in charge of the unit. After receiving the accident report, the person in charge of the unit shall take effective measures in time to organize rescue and prevention.

Stop the accident from expanding, reduce casualties and property losses, and report to the local departments responsible for the supervision and administration of production safety immediately and truthfully in accordance with the relevant provisions of the state, and shall not conceal, falsely report or delay the report.

Deliberately destroying the scene and destroying relevant evidence.

8. What are the provisions of the building law on site environment and protection?

A: Construction enterprises should abide by the laws and regulations on safe production of environmental protection boxes and take measures to control and control all kinds of dust, waste gas, waste water, solid waste, noise and vibration on the construction site.

Environmental pollution and harmful measures.

9. What are the requirements of the Production Law for accident investigation and handling?

Answer: The investigation and handling of accidents should follow the principle of seeking truth from facts and respecting science, find out the cause of accidents in time and accurately, find out the nature and responsibility of accidents, sum up the lessons of accidents, put forward rectification measures and be responsible for accidents.

The author puts forward some suggestions. Specific measures for accident investigation and handling shall be formulated by the State Council.

10. What is the legislative purpose of the production law?

A: In order to strengthen safety management, prevent and reduce production safety accidents, ensure the safety of people's lives and property and promote economic development.

1 1. What parts can't be disassembled when using scaffolding?

Answer: 1 Vertical and horizontal poles at the main node, vertical and horizontal sweeping poles. 2 even the wall pole.

12. What are the requirements for the safe use of electric welding machines?

Answer: 1 The welder should be equipped with a separate switch. 2 welding machine shell must have zero hanging or grounding protection. 3. The length of the primary line of the welding machine is not more than 5 meters, and the length of the secondary line is not more than 30 meters. 4 Handle line and loop zero line of electric welding machine

It must be two-lane. 5 Operators should wear protective equipment.

13. What regulations should be observed when suspending operations?

Answer: 1 The steel structure shall be assembled on the ground as far as possible. Temporary fixation, electric welding, high-strength bolt connection and other processes should be equipped with high-density safety facilities, and components should be hung in place at the same time. Safety measures during disassembly should also be considered.

Implement. When hoisting large components such as prestressed reinforced concrete roofs and trusses at high altitude, safety measures for suspended operation should also be set up. 2 hoisting installation template, hoisting prefabricated components first, and then hoisting single large and medium-sized.

When prefabricating components, you must stand on the operating platform for operation. When hoisting large formwork such as asbestos cement and prefabricated components of roof slab, it is forbidden to stand and walk.

14. What are the rights of employees stipulated in Article 45 of the Production Law?

Answer: Understand the risk factors, preventive measures and emergency measures existing in workplaces and jobs, and have the right to make suggestions on the safety production of the unit.

Short answer analysis:

1. Problems with oxygen and acetylene cylinders

Answer: 1 The safety distance between oxygen cylinder and acetylene cylinder is not enough, and it should be not less than 5 meters. 2. Carbon dioxide cylinders are mixed with oxygen cylinders and acetylene cylinders. 3 welding site staff smoking. 4. Special operations personnel shall not work without a license. 5 the welder didn't wear it

Special protective clothing.