Current location - Education and Training Encyclopedia - Education and training - What safety measures should be taken when working on the secondary circuit of live current transformer?
What safety measures should be taken when working on the secondary circuit of live current transformer?
1. Before work, the power-off equipment and surrounding equipment must be checked with a qualified test pen.

2, the work should be taken to prevent accidental touch, accidental touch near live equipment measures and measures to prevent short circuit of live equipment.

3. Take measures to prevent straying into the nearby electrified section and boarding the nearby tower by mistake.

4, it is strictly prohibited to stop sending through publicity, about time, etc.

5, according to the need to arrange the command and guardian.

Extended data:

Basic requirements:

1. The current passing through human body must be limited below the safe current of 1mA.

2. The intensity of high-voltage electric field must be limited to a value harmless to personal safety and health.

3. Live-line operators must attend strict technical training, and can only take up their posts after passing the examination. When working, it should be supervised by designated personnel.

4. For complex and difficult live working, it is necessary to go through on-site investigation, formulate corresponding working process scheme and strict operating procedures, and take reliable safety technical organization measures.