Question 2: What numbers are used in the title of the tender? What font? Tender format standard:
A, paper requirements:
The front cover, back cover and text are made of A4 paper, white, and the size after binding is 2 10*297mm (standard A4 size); The construction plan and schedule shall be in A3 or A4 white paper.
Second, the printing form:
Used for single-sided printing; There can be no upside-down or upside-down pages; Binding needle and thread should not be exposed on the front cover and back cover; All tenders shall not be bound with loose leaves (punched holes, folders, etc.). ).
Third, the layout:
1, default format: 2, narrow format:
The top margin is 26mm, the bottom margin is 22mm, the left margin is 25mm, the right margin is 25mm, and the binding line is 3mm on the left side of the paper (it can be adjusted according to the number of pages). The layout has header, footer and page number. The font size of the header and footer is small five, the header spacing is 20mm, the footer spacing is 15mm, the page number is centered, and the line spacing is 1.5 times the line spacing. The format of a regular paragraph is that the first line is indented by 2 characters.
Fourth, the font:
The font is bold, and the font is not bold.
The title of the article is bold No.3 (bold), the title of the chapter is bold No.3 (bold), the font of the text is small No.4 (not bold), and all fonts are black. The chapter numbers should be "I, II, III" and "1 2 3", and the section numbers should be "1 2 3",1.1.3 "and"1.
Arial should be used in English fonts, and the font size is the same as that of Chinese fonts.
The legal statement, article quotation, agreement signing or statement and signature shall be signed and sealed, and the font of the letter shall be imitation Song GB_23 12 No.4.
Verb (short for verb) form:
All table titles are Song Ti No.4 (bold). The contents of the form are in the form of small four or small five (not bold).
Six, illustrations:
The illustration size should be suitable for the document layout and should not exceed the margin; The quality of the enlarged or scaled picture is better, otherwise it should be adjusted to the corresponding size in the image processing software and then pasted into the document.
Seven, electronic file format:
For compatibility, the format of electronic files should be office97-2003, with the extension:. Doc and excel extensions:. xls。
Eight, about the original, copy and binding requirements
All originals and copies of the tender shall be bound into a book, with one original and one copy. The content and typesetting format of the original and the copy are the same, and the marks of the original and the copy are marked in the upper right corner of the cover of the tender. /kloc-No.0/and No.2 tender covers shall be stamped with the official seal of the bidder and the seal of the legal representative. The cover should have a fixed format.
It is necessary to make another bid binding requirement and submit it to the technical center for preservation.
Reference: Baidu Library
Question 3: What font does the tender document usually use? You can get the typesetting and binding requirements from the tender documents. Usually the fourth. Maybe something special, something unique. All you have to do is do as required. Come back and say that you will not respond to the bidding documents!
Question 4: What are the requirements for the font and format of the tender? Tender specification: (if required by the customer, it shall be written in strict accordance with the requirements) Title part 1 Font and font size requirements. Title 1:2, bold and centered; Spacing: 0 lines before the paragraph, automatically after the paragraph; Special format: hanging indent; Measured value: 0.25cm；; Row spacing: 1.5 times row spacing; Outline grade: 1 grade; Line breaks and pagination: select the title 1 with pagination before the paragraph and non-pagination within the paragraph in the format of "Chapter X xxxxx", and set it in "Bullets and Numbers" after generating the title 1. Select multilevel symbols and set them in customization. The numbering style is "1, 2,3", and the number 65438 appears in the numbering format. Then choose level 2 on the left, select 1 level in the previous level number, add "."to 1 in the number format, and select "1, 2,3" as the number style to generate the secondary directory number. By analogy, three-level and four-level directories can be generated. If the format of saving the secondary number is determined, the number will be automatically generated when the titles at all levels are generated. Title 2: Use No.2, bold, bold and left; Spacing: automatic before segment and automatic after segment; Special format: hanging indent; Measured value: 0.5 cm; Line spacing: single line spacing; Outline level: level 2; Line breaks and page breaks: Select the same page as the next paragraph, and there are no page breaks in the paragraph. Title 3: Use No.3, bold, bold, left; Spacing: automatic before segment and automatic after segment; Special format: hanging indent; Measured value: 0.5 cm; Line spacing: single line spacing; Outline level: level 3; Line breaks and page breaks: Select the same page as the next paragraph, and there are no page breaks in the paragraph. Title 4: Use small three, bold, bold and left-aligned; Spacing: automatic before segment and automatic after segment; Special format: hanging indent; Measured value: 0.5 cm; Line spacing: single line spacing; Outline level: level 4; Line breaks and page breaks: Select the same page as the next paragraph, and there are no page breaks in the paragraph. L The font size of the text requires that the text should be in small four font, and special parts can be marked with bold, underlined or different colors, and the line spacing should be 1.5 times the line spacing. The first line of each paragraph is indented by two characters. For the part that needs to be explained, "●" can be used as the logo, and "■" can be used as the secondary logo. 3.7.2 The page format requires that the cover page has no header/corner. Table of Contents Header/Page Corner: China Mobile logo is placed on the left side of the header part, and the text description is Song No.5, and the text content is consistent with this part; On the left side of the page corner is the company name, and the text adopts No.5 Song Style; Insert the page number on the right, the font is bold, the format is "-x-", and the page number format is "ii ii iii". Text content adds L text header/page corner: China Mobile logo is placed on the left side of the header part, and the text description adopts No.5 Song, and the text content is consistent with this part; On the left side of the page corner is the company name, and the text adopts No.5 Song Style; Insert the page number on the right, the font is bold, the format is "-x-", and the page number format is "1, 2,3". Pay attention to adjust the page number (the text starts with "1", and the page number does not contain the table of contents). 3.7.3 The cover format requires that the name of "XXX Proposal" should be above the cover. The name of "XXX Proposal" should include the customer name and project content information, and the font should be bold, centered and the line spacing should be 1.5 times. The middle is "China Mobile Group Company" (or "XXX Mobile Company"), bold and bold with No.3, aligned in the middle, and the line spacing is 1.5 times. Note the time below, the third is bold and bold, the middle is aligned, and the row spacing is 1.5 times. L The table of contents format requires that the word "table of contents" be located at the top of the table of contents page, with two bold and two bold figures and two spaces inserted in the middle. Line spacing should be 1.5 times of line spacing, with automatic spacing before and after paragraphs. Select "Official" as the format of the insertion directory and "4" as the insertion level, and the number of lead-in stages can be adjusted under special circumstances. 3.7.4 The basic version of the printed binding proposal is printed in black and white on ordinary A4 copy paper, and the cover is made of colored cover paper. The binding method is hard clip, apron or nail strip, in which apron and nail strip need to be punched on the left side of all scheme documents. Attachment (template, which needs to be adjusted according to the specific situation) Volume I (Business) Letter of Thanks to Customers Summary of Bid Letter I. Letter of Commitment for Bidding II. List of Bid Opening III. List of Total Quotations for Bidding IV. List of Quotations for Bidding Items V. List of Business Deviations VI. List of Deviations for Technology and Services VII ... >>
Question 5: What are the requirements for the format, font and line spacing of the tender? Tender specification: (if required by the customer, it shall be prepared in strict accordance with the requirements)
1 font and size requirements
Title part font size requirements
Title1:No.2, bold, bold and centered; Spacing: 0 lines before the paragraph, automatically after the paragraph; Special format: hanging indent; Measured value: 0.25cm；; Row spacing: 1.5 times row spacing; Outline grade: 1 grade; Line break and page break: select the page break before the paragraph, and there is no page break in the paragraph. The title 1 adopts the format of "Chapter 10 xxxxx". After the title 1 is generated, it is set in "Bullets and Numbers". Select multilevel symbols and set them in customization. Select "1, 2,3" as the numbering style, and add "sign" and "before and after the number 1 appearing in the numbering format. Then select level 2 on the left, select 1 level in the previous level number, and add ". After the number 1 in the number format, select "1, 2,3" as the number style to generate the secondary directory number. By analogy, three-level and four-level directories can be generated. If the format of saving the secondary number is determined, the number will be automatically generated when the titles at all levels are generated.
Title 2: Use No.2, bold, bold and left; Spacing: automatic before segment and automatic after segment; Special format: hanging indent; Measured value: 0.5 cm; Line spacing: single line spacing; Outline level: level 2; Line breaks and page breaks: Select the same page as the next paragraph, and there are no page breaks in the paragraph.
Title 3: Use No.3, bold, bold, left; Spacing: automatic before segment and automatic after segment; Special format: hanging indent; Measured value: 0.5 cm; Line spacing: single line spacing; Outline level: level 3; Line breaks and page breaks: Select the same page as the next paragraph, and there are no page breaks in the paragraph.
Title 4: Use small three, bold, bold and left-aligned; Spacing: automatic before segment and automatic after segment; Special format: hanging indent; Measured value: 0.5 cm; Line spacing: single line spacing; Outline level: level 4; Line breaks and page breaks: Select the same page as the next paragraph, and there are no page breaks in the paragraph. L The font size of the text requires that the text should be in small four font, and special parts can be marked with bold, underlined or different colors, and the line spacing should be 1.5 times the line spacing. The first line of each paragraph is indented by two characters. For the part that needs to be explained, "●" can be used as the logo, and "■" can be used as the secondary logo.
3.7.2 Page Form Requirements
Cover without header/corner.
Table of Contents Header/Page Corner: China Mobile logo is placed on the left side of the header part, and the text description is Song No.5, and the text content is consistent with this part; On the left side of the page corner is the company name, and the text adopts No.5 Song Style; Insert the page number on the right, the font is bold, the format is "-x-", and the page number format is "ii ii iii". Text content adds L text header/page corner: China Mobile logo is placed on the left side of the header part, and the text description adopts No.5 Song, and the text content is consistent with this part; The left side of the page corner is the company's attack name, and the text adopts No.5 Song style; Insert the page number on the right, the font is bold, the format is "-x-", and the page number format is "1, 2,3". Pay attention to adjust the page number (the text starts with "1", and the page number does not contain the table of contents).
3.7.3 Format requirements for cover and catalogue
Cover format requirements
At the top of the cover page is the name of "XXX Proposal". It is required that the name of "XXX Proposal" includes the customer's name and project content information, and the font is bold, with 1 in the center, and the line spacing is 1.5 times, with automatic spacing before and after paragraphs. The middle is "China Mobile Group Company" (or "XXX Mobile Company"), bold and bold with No.3, aligned in the middle, and the line spacing is 1.5 times. Note the time below, the third is bold and bold, the middle is aligned, and the row spacing is 1.5 times. L The table of contents format requires that the word "table of contents" be located at the top of the table of contents page, with two bold and two bold figures and two spaces inserted in the middle. Line spacing should be 1.5 times of line spacing, with automatic spacing before and after paragraphs. Select "Official" as the format of the insertion directory and "4" as the insertion level, and the number of lead-in stages can be adjusted under special circumstances.
Printing and binding
It is suggested that the basic version of the scheme should be printed in black and white on ordinary A4 copy paper, and the cover should be colored. The binding method is hard clip, apron or nail strip, in which apron and nail strip are binding methods ... >>
Question 6: How to write the cover of formal tender? It is said that the title of the cover of a formal document is always No.2 (Chu Xiao has special requirements), bold and centered, and the text is in the form of comma and song style, with the first letter aligned. The date is written in the middle of the fourth letter in the last line. If you need to add the company logo, the logo should be written under the title. If the logo is all Chinese characters, it can also be written on it, and it must be centered.
Question 7: Do you want to write the cover of the copy of the tender? The copy is the same as the original. The only difference is that the original contains something, such as a power of attorney. A copy is a copy stamped with the official seal. In addition, if the contents of the copy and the original are different during bid evaluation, the original shall prevail. So of course, the copy should be written on the cover like the original.
Question 8: Can I change the font of the cover format of the tender documents? Not the technical part. I would like to ask whether the font of your bidding documents must be consistent with the bidding documents. Generally speaking, the font of your tender documents can be decided by yourself, unless there are special requirements in the tender documents, please read the specific requirements in the tender documents.
Question 9: About the design of tender cover 1. These six words are: dot, line, surface, black, white and gray.
1. Points, lines and surfaces are the basic elements of a design language. In the eyes of designers, the existence of all spaces is composed of points, lines and surfaces. They interweave, blend and set off each other, forming an order and rhythm. Book binding design is to use the world of points, lines and surfaces. For example, a word, a small figure is a point, and a row of neatly arranged words is a line; A figure is a face, a paragraph of text is also a face, and the edge of the face is still a line. Layout design is purely organized by points, lines and surfaces.
2. Black, white and gray refer to the relationship between light and shade of design works. Any visual art, no matter how complicated its form and rich its transformation, boils down to reflecting the relationship between black, white and gray. Handle well and look comfortable; Otherwise, it will give people a gloomy and messy feeling. In book design, it is particularly important to deal with the relationship between black, white and gray.
3. Point, line, surface, black, white and gray do not exist in isolation, they are often different manifestations of a form. For example, on a piece of paper, the place where the blocks are formed consists of dense lines, forming a gray face, with illustrations or titles in black and quadrangles in white. The quality of layout design largely depends on how to deal with these relationships.
4. The most basic requirement of layout design is that it is convenient for readers to read, can be coordinated with the text content, helps to understand the content, and makes people feel comfortable when reading; But it is not offside, it seems that it does not exist, and it will not affect people's reading process and mood. Layout skills are skills you can't see, not independent of words, so that readers can highlight their feelings. The key of layout design is to use the coordination means of point, line, surface, black, white and gray, adjust the proportion of core and four margins, and choose the appropriate font and line spacing. We should pay attention to the rhythm of readers' reading and strengthen the design of the first page and chapter titles. Don't spend too much on fonts, generally no more than four changes on a page. If there is no special requirement, it is best not to place patterns in the margins at will, because in that case, it looks lively on the surface and will actually distract the reader.
Two, five words are: font, figure, color, composition and style.
1. The font should be treated as a graphic in the cover, so besides the accuracy of the text meaning, we should pay more attention to its position, font, size, density and style in the overall composition. My personal experience is to use handwritten characters and irregular fonts carefully. It's not that it can't be used, but it's more difficult. It's not as safe as printing. Because the choice of printing, even if inappropriate, is not much difference, but the wrong use of handwriting will bring fatal damage to the overall design.
2. Graphics can be divided into figurative and non-figurative, and should be selected according to the contents of the book. If it is a documentary, it should be concrete; If the theme is romantic, it should be non-figurative. Moreover, the selected graphics must be matched with the text, and the composition should be consistent with the main style.
3. Color is the visual language that first impresses readers before words and graphics. The main color of each book should conform to the basic artistic conception of the text content and the style of the work. Although everyone has different feelings about color, their understanding of the symbolic meaning of color is the same, such as white for purity, blue for romance, purple for mystery, green for life and so on. We can determine the main color of the book according to people's general understanding and feelings about color.
There are some basic patterns in composition, which should be kept in mind so as to be used flexibly on this basis. Its law has three important points: first, symmetry, which means that the same number of design elements are evenly distributed on the central axis or center point. Its strength is stability and solemnity, and it is suitable for serious books. But it also has the shortcomings of lack of change and monotony. The second is balance, and the principle of balance is equality and inequality. It means that the design elements are placed at different distances, but there are big and small, light and heavy, far and near, giving people a sense of psychological balance. Successful balanced therapy is both reasonable and unexpected, which makes people feel lively, relaxed, vivid and interesting. It can highlight the spirit of the book and the artistic taste and wisdom of the designer. The third is comparison. Contrast refers to putting the opposites of heterogeneity and quantity together, giving people visual differences and differences, such as size, height, thickness, distance, density, black and white, complexity, truth and so on. The use of contrast can make the picture change, have a sense of rhythm, make the primary and secondary clear, bigger and smaller, and make the image more prominent. However, the contrast should also be measured, and the picture should be ... >>
Question 10: where is the original two words 5 written in the tender? Generally, it is stamped in the upper right corner of the cover of the tender documents with a red stamp, or the words "original" can be printed directly on the cover. Look at the requirements of the tender documents. If there is no requirement, both can be used.