In today's social life, many places will use the responsibility book. Responsibility letter is an instrument that specifies the scope and responsibility when a job involves multiple departments. So, have you mastered the format of the responsibility book? The following is the safety responsibility letter of the technical department (8 general articles) I compiled for you for your reference, hoping to help friends in need.
Ministry of Science and Technology 1 Safety Responsibility Letter aims to strengthen the management of coal mine safety production, ensure the safety of workers, improve the safety self-protection ability of underground frontline workers, and effectively curb the casualty accidents of coal mine workers. According to the relevant provisions of the Coal Law, the Mine Safety Law, the Regulations on Coal Mine Safety Supervision, the Coal Mine Safety Regulations and other laws and regulations, combined with the actual situation of the unit, this responsibility book for safety in production is formulated as follows:
I. Responsibilities and authority of Party B (waterproof technician in geological survey):
1. Party B voluntarily goes to the competent department of Party A to engage in geological survey and water prevention technology, obeys the management of Party A, and conscientiously implements the management system of coal mine safety production formulated by Party A. ..
2, seriously study and strictly abide by the rules and regulations of coal mine and labor discipline, it is strictly prohibited to three violations.
3. Actively participate in professional knowledge education such as pre-job training organized by Party A, constantly strengthen personal safety awareness and improve safety self-protection ability.
4, mount guard must be dressed in accordance with the provisions (overalls, rain boots, mine cap, miner's lamp, self-rescuer, gloves, towels) must be carried, properly kept, and the correct use of protective equipment.
5, the use of "ten rights of coal mine workers' safety in production" to participate in coal mine safety production management.
Two. Obligations and rights of Party A (section chief)
1. Provide training equipment and places for employees to participate in pre-job training and professional and technical training, and conduct regular safety education and training for employees.
2. Distribute labor protection articles to employees.
3. Have the right to inspect and supervise Party B's implementation of safety rules, operating rules and operating rules in the production process, and have the right to punish or reward the implementation.
4. Have the right to punish Party B's illegal operation.
Three. This responsibility shall be implemented as of 20xx. This responsibility book is made in triplicate, one for each party and one for the company's file.
Party A: Party B:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Safety Responsibility Letter of Technology Department II. Work Objectives
1, and the major casualty accident is zero.
2. Major fire accidents are zero.
3. Major traffic accidents are zero.
4. The minor injury rate is less than 3‰.
5. Minimize general accidents, and the rectification rate of potential safety hazards reaches 100%.
6. The working and living environment of employees conforms to various industrial hygiene standards stipulated by national laws and regulations.
Second, the responsibility content
1. Prepare or revise the technical operation regulations, and the technical indicators must meet the requirements of safe production, and regularly supervise and inspect the implementation.
2. Revise the long-term development plan, prepare the company-wide technical measures plan, and carry out technical transformation, which should include safety technology and measures to improve working conditions. No reduction of safety technical measures and misappropriation of expenses may be made for any reason. Measures to increase production and save money should meet the safety technical requirements.
3 responsible for the investigation, handling and statistical reporting of production and construction accidents caused by technical reasons, and participating in the investigation and handling of other accidents reported to the head office or above.
4. Strictly implement the principle of simultaneous design, simultaneous construction and simultaneous commissioning of occupational safety and health facilities and the main project.
5. Organize and supervise the technical training of production operators by production units.
6, responsible for the implementation of process discipline management regulations, often check the implementation of process discipline, timely correct the existing problems.
7, responsible for organizing safety technical inspection, improve technical problems in a timely manner.
8, organize technical research work, actively adopt advanced technology and safety maintenance.
9. Complete other temporary safety work arranged by the company.
Third, evaluation
When an accident occurs, it shall be assessed according to the company's accident management regulations and safety management assessment standards; If it causes serious consequences and constitutes a crime, it shall be given corresponding administrative sanctions and handed over to judicial organs for handling.
Four. supplementary terms
1. This responsibility letter is valid for one year, that is, from 20xx 65438+ 10/to 20xx65438+February 3 1.
2. This responsibility letter is made in duplicate, with each party holding one copy.
Signature of Party A (General Manager):
Signature of Party B (technical):
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Safety Responsibility Letter of Technical Department 3 In order to conscientiously implement the spirit of relevant documents of provinces, cities and counties on strengthening the safety production management of mining enterprises, further clarify the safety production responsibilities of each post, ensure that everything is horizontal to the edge and vertical to the end, and that people are responsible at all levels to ensure the 20xx annual safety production, the 20xx annual safety target responsibility letter was signed in combination with the actual situation of the mine, and the mine manager and the technical deputy mine manager signed the following safety target responsibility letter:
A, the goal of safe production:
1, realize no serious injury and serious injury accidents throughout the year, and put an end to gas and flood accidents; Minor injuries below grade seven shall be controlled within 4 persons; Non-disabled general industrial accidents should be controlled within 10.
2. Under the premise of ensuring safety, complete the production tasks assigned by the coal mine with good quality and quantity.
Second, the main task of production safety:
L, adhere to the policy of "safety first, prevention first", seriously organize employees to learn and train knowledge about coal mine safety technology, laws and regulations, and effectively improve the safety awareness of coal mine employees.
2, earnestly perform the duties of technical director, responsible for mine "one ventilation and three prevention" management, participate in gas emission and control, and supervise and provide technical service guidance.
3, carefully prepare the annual mine disaster treatment plan and mine major accident emergency plan, and assist the mine manager to organize emergency rescue drills and provide first-hand raw materials.
4, responsible for the supplement, modification, preparation of safety technical rules and regulations applicable to this mine and all kinds of safety technical operation procedures, mining operation procedures and safety technical measures, and is responsible for the audit.
5, mine safety learning and training plan, safety technical knowledge training for employees on a regular basis.
6, pays special attention to the mine gas monitoring management, to ensure the normal operation of gas monitoring, accurately print out the gas daily report.
7, according to the measured data, draw a good mine excavation engineering plan, well control diagram, ventilation system circle, disaster avoidance circuit diagram and fill it in on schedule.
8, to assist the mine manager pays special attention to the mine safety management.
9, technical director during his tenure, due to failure to perform their duties caused by the accident, must bear full responsibility, if the circumstances are serious, shall be reported to the judicial organs for legal responsibility.
10, no less than five shifts per month.
1 1, the book is valid from 20xx 1 to 20xx 12 3 1.
Matters not covered in this responsibility book shall be implemented according to "Coal Mine Safety Regulations".
Person in charge:
Xx，xx，XX，XX
Safety Responsibility Letter of Technology Department 4 I. Responsibilities
(3) General production safety responsibilities
1. Implement the company's safety production policy of "people-oriented, obeying rules and disciplines, caring for life and developing safely", and combine with work practice to run through all activities of production, operation and service;
2. Improve departmental rules and regulations and implement post responsibility system;
3. Advocate employees to unite and cooperate, make continuous progress, actively innovate and continuously improve, and promote the safe development of the company;
4. Assess and evaluate the safety production performance of employees in this department;
5. Lead a team to inspect the area under its jurisdiction and cooperate with the rectification department to do a good job in rectification;
6. Hold a regular meeting on production safety at least once a month, keep minutes of the meeting and report it to the competent department of safety;
7. Assist the centralized department of safety education and training, and do a good job in safety production education and training of personnel in this department;
8, assist the safety management department to do a good job of hazard identification in this department;
9, to participate in the comprehensive inspection of production safety committee, put forward reasonable suggestions.
(1) Safety production responsibilities of the manager of production technology department
1, establish a departmental safety production management network, and be equipped with two levels of safety management personnel at the departmental and team levels;
2. Organize safety and health education for departmental employees, including interns and trainees, at the departmental and team levels; Regularly organize on-the-job safety education activities for employees;
3, when an accident occurs, take measures to prevent the accident from expanding, timely report to the superior, and pay attention to protect the scene, make records;
4. Responsible for the working environment, facilities and equipment of the laboratory and the quality inspection process in a safe state;
5, responsible for the material stacking environment, resettlement conditions, process control to meet safety requirements.
Second, the goal.
The serious injury accident of production technology department is 0; Occupational disease 0;
The number of minor injuries and near misses in the production technology department is less than or equal to1;
The fire accident in the production technology department is 0;
The production technology department is not responsible for traffic accidents;
The rectification rate of hidden dangers in the production technology department is 98%;
The safety production training rate of the production technology department is100;
Third, the reward and punishment assessment methods
According to the Management System for Formulation, Review, Revision and Assessment of Safety Production Responsibility System, the implementation of the responsibility system and the completion of safety production targets are assessed on February 30th every year, and the assessment adopts the scoring system, and the assessment results are recognized by the first person responsible for safety production.
Four. explain
The person in charge of safety shall sign the responsibility letter for production safety with the manager of production technology department, and the manager of production technology department shall complete the responsibilities and objectives one by one, and the leading group for production safety shall conduct an assessment at the end of the year.
Person in charge:
Xx，xx，XX，XX
Safety Responsibility Letter of Technical Department 5 In order to effectively strengthen the construction of safety production management projects and safeguard the safety of people's lives and national property, Tianluochong, the second phase of the shantytown renovation project of the original Quren Mine, which belongs to Shaoguan Engineering Office of Shantou Dahao Construction Corporation, signed a 20xx~20xx annual safety production target responsibility letter with the technical director to decompose the indicators and implement the responsibilities.
First, the assessment objectives
1, the safety in production on the construction site must be 100% qualified.
2, put an end to malignant casualties.
3, put an end to major mechanical equipment, traffic and fire accidents.
4, put an end to the occurrence of serious criminal cases.
5, reduce the serious injury accident, the serious injury rate is not more than 1‰.
6. Avoid minor injuries, and the annual injury rate shall not exceed 2‰.
Second, the assessment content
1, seriously implement the national guidelines, policies, safety standards and specifications, formulate specific implementation measures in combination with the actual situation of this project, and check the implementation.
2, in the project management, fully responsible for the project safety production technology work, so we must take safety technology work as an important agenda, in the planning, layout, inspection, summary and evaluation of safety production technology work.
3, organization, preparation of construction scheme, must according to the engineering characteristics, the use of mechanical equipment and construction technology, etc. Identify major hazard sources and major environmental factors in this project, and formulate targeted safety and environmental protection technical measures, which will become the scientific and technical basis for guiding construction.
4, often in-depth construction site, safety inspection in operation, timely study and deal with major safety technical problems.
5. Assist relevant departments in safety education and training for new workers, job transfer and external employment, and be responsible for safety technical guidance for full-time (part-time) safety personnel.
6. Be responsible for the detailed safety technical disclosure to the professional foreman and builder (foreman) of the project. After the disclosure, both parties shall sign the safety technical disclosure card.
7, summarize and exchange technical experience in production safety.
8. Technically analyze the causes of major casualty accidents and near misses, and put forward investigation opinions and improvement measures.
9. Participate in the acceptance of large and medium-sized equipment of the project and perform the acceptance duties.
Third, the evaluation method.
According to the relevant regulations of Shaoguan Engineering Office of Shantou Dahao Construction Corporation.
Person in charge:
Xx，xx，XX，XX
6 Safety Responsibility Letter of Party A's Technology Department:
Party B:
Safety first, prevention first. Safety in production is a matter of life, and the responsibility is more important than Mount Tai. It conforms to the life safety of the country, society, enterprises and every construction worker. Do a good job in safety production and civilized construction management, implement the responsibility system for safety production, put an end to safety accidents, complete the safety management objectives of engineering construction issued by the company, and formulate the responsibility book for safety production. All managers of the company engaged in project construction must sign a letter of responsibility with the project manager.
I. Term of responsibility
This responsibility is from _ _ _ _ _ _ to the completion of the project.
Second, responsibility.
1, take technical responsibility for the safety in production in the production and operation of the project.
2, carry out, implement the safety policy, strictly implement the safety technical specifications, procedures and standards. Combined with the characteristics of the project.
3, organize the preparation of project construction organization design. Organize the preparation of project safety and civilized construction organization design, external scaffolding construction organization design, temporary electricity construction organization design and other sub-item construction organization design. For the following sub-projects with high risk of reaching a certain scale, special construction schemes should be prepared: foundation pit support and dewatering engineering, earthwork excavation engineering, formwork engineering, hoisting engineering, demolition engineering and blasting engineering, and emergency rescue plans for safety production of this project should be organized. When compiling and reviewing the construction plan, we must formulate and review the safety technical measures to ensure their feasibility and pertinence, and check, supervise and implement them at any time.
4, at the same time responsible for technical measures plan and seasonal construction plan, formulate corresponding safety technical measures, and supervise the implementation, timely solve the problems in the process of implementation.
5. When new materials, new technologies and new tools are applied to the project, they should be declared in time and implemented only after approval.
6, presided over the acceptance of safety protection facilities and equipment. When abnormal conditions are found in equipment and facilities, measures should be taken immediately to strictly control the use of protective equipment and facilities that do not meet the standard requirements.
7, to participate in production safety inspection, the unsafe factors existing in the construction, put forward rectification opinions and measures, technically eliminated.
8. Participate in and cooperate with the investigation of casualty accidents and major near misses, technically analyze the causes of accidents, and put forward preventive measures and opinions.
Third, performance appraisal.
L, implement a safe one-vote veto system. Where there is a major casualty accident or safety accident exceeding the standard, the qualification for evaluation in that year will be cancelled, and punishment will be made according to the system.
2. The assessment is conducted in the form of "Monthly Assessment of Project Department".
Fourth, rewards and punishments.
According to the company's relevant safety production reward and punishment system.
Verb (abbreviation of verb) supplementary clause
L if the person responsible for signing the responsibility book changes, the successor will sign the responsibility book again.
2. This responsibility letter is made in duplicate, with each party holding one copy.
Party A: _ _ Party B:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
The Safety Responsibility Letter of the Technology Department 7 is based on the provisions of the Safety Production Law of People's Republic of China (PRC), the Measures for the Supervision and Administration of Safety Production of Highway and Waterway Engineering of the Ministry of Transport, the Technical Specification for Highway Engineering Construction Safety, the Measures for the Administration of Standardized Construction of the Northern Section of Suzhou Central Expressway of Suzhou First-class Highway Construction Headquarters, the safety production management system of the head office and the Measures for the Administration of Safety Production of XCLQ02 Bid Section of the Northern Section of Suzhou Central Expressway. In order to ensure the safe production of the northern section of Suzhou downtown expressway, eliminate and reduce all kinds of accidents, promote the safety work of the project department to a higher level, and effectively provide safety guarantee for the smooth realization of the project objectives and tasks. According to the actual situation of XCLQ02 bid section project safety management in the northern section of Suzhou Central Expressway, the safety responsibility book was formulated.
1. Safety management objective: put an end to major accidents in production safety and safety accidents, and strive for a provincial "safe construction site" demonstration project. Effectively supervise the standardization of safety management, construction standardization and safety management procedures in the construction site of this bid section, effectively control construction safety risks, reduce general production safety accidents and create a "zero casualty" project.
2. Abide by national laws and regulations, learn to be familiar with safety technical measures, and arrange and implement safety technical measures at the same time in the process of organizing construction.
3. As the construction personnel's own responsibility, the safety work on the construction site should check the specification requirements and scientificity of various safety facilities at the same time during the construction process. If it is found that it does not meet the requirements of the specification and is scientific, it should be adjusted in time and reported to the leaders.
4, in the process of construction, found illegal phenomenon or risky operation, cooperate with safety officer * * * to do a good job, stop and correct, suspend construction when necessary, report to the project manager. Take timely measures to nip in the bud.
5, in the process of construction, when there is a contradiction between production and safety, must obey the safety, suspend construction, after being safety rectification and implement safety measures, to allow construction.
6, in the process of construction, found that the security risks, timely report to the leadership and take measures, collaborative rectification, to ensure the safety in production in the whole process of construction.
7. Report the accident immediately, organize rescue, protect the site, make records and implement preventive measures.
This Safety Responsibility Letter is made in duplicate, one for myself and one for the Safety Department (Department). Time from construction date to construction completion date.
Person in charge:
Xx，xx，XX，XX
In order to thoroughly implement the policy of "safety first, prevention first and comprehensive treatment", fully implement the responsibility system for production safety, effectively curb the occurrence of all kinds of accidents, ensure the stability of the company's production safety situation, and do a solid job in production safety in 20xx, according to the principle of "whoever is in charge is responsible", the general manager of the company and the vice president of technology signed the responsibility book for production safety in 20xx, requiring them to fully perform the following duties for production safety:
I. Objectives
1, within the scope of management responsibilities, there are zero safety, fire protection, environmental protection and occupational health and safety accidents;
2, minor injuries are zero, serious injuries and deaths are zero;
3. The participation rate of various safety inspections organized by the company reaches 90%;
4. The participation rate of safety production training and education reaches 90%.
Second, the management requirements
1. The vice president of technology is the general manager's staff in production management. Under the direct leadership of the general manager, supervise, inspect and coordinate the safety production problems in the business, and be responsible for the leadership, supervision and inspection of the company's safety production.
2. According to the principle of "whoever is in charge is responsible", the technical vice president is technically fully responsible for the company's safety production and the safety of the equipment guarantee system.
3, strengthen the management of safety technology, actively adopt advanced safety technology and safety protection equipment, organize research and implementation of major accident hidden dangers rectification scheme.
4. When organizing the design, construction and commissioning of new equipment, new devices and technical transformation projects, the occupational safety and health facilities shall be designed, constructed and put into use simultaneously with the main project.
5. Review the company's safety technical regulations, operating procedures and safety technical measures to ensure technical feasibility; Organize the formulation, revision and approval of equipment safety management rules and regulations and equipment safety technical regulations, and organize their implementation.
6. Participate in the company's accident investigation, organize technical force to analyze and identify the technical causes of the accident, and put forward technical improvement measures.
7. Adhere to the principle of "five simultaneities", supervise and inspect the performance of the safety responsibilities of the competent equipment department and the implementation of various equipment safety management rules and regulations, and promptly correct dereliction of duty and violations.
8, organize equipment safety inspection, implement the rectification of equipment hidden dangers, and formulate safety precautions.
9. Be responsible for reviewing the safety management scheme of equipment maintenance site and the safety agreement of foreign maintenance personnel, and supervise and inspect the implementation.
10. Hold regular safety production meetings of technical quality and equipment departments, analyze the trends of process technology safety and equipment safety production, and solve existing problems in time.
1 1. Organize safety production competitions of technical equipment departments, sum up advanced experience and reward advanced departments and individuals.
12. According to the above safety responsibilities, make the annual safety work plan of the technical vice president every year and implement it one by one in the specific work arrangement of that year.
Third, evaluation
1. The general manager of the company is responsible for organizing the inspection and assessment of this responsibility letter.
2, the annual completion of responsibility assessment indicators, to achieve safety production without accidents, safety management standards, to reward the main responsible person.
3. If an accident occurs during the year and the assessment index of the responsibility book is not completed, the company will give a warning and economic punishment to the responsible person according to the Measures for Punishment of Production Safety Accidents and Violation of Regulations of Beijing Shouhang Science and Technology Development Company and related regulations. In the event of an accident, a safe one-vote veto will be implemented.
Four. Supplementary terms:
1. This responsibility book is made in duplicate, one for the office of the company's safety committee and one for the responsible person.
2 responsibility from the date of signing the assessment.
Person in charge:
Xx，xx，XX，XX
;