Knowledge of building safety education 1. What are the safety precautions in the construction site?
1, before entering the construction site, construction personnel must carry out education and assessment on construction safety and fire control knowledge, and employees who fail the assessment are prohibited from entering the construction site to participate in the construction.
2. Strictly carry out the operation procedures, and shall not command or operate illegally, have the right to refuse the instruction of illegal operation, and have the responsibility to stop others from operating illegally.
3. Personal protective equipment must be worn correctly during construction, and safety helmet must be worn when entering the construction site. Don't use fire without permission, and don't operate after drinking.
4, engaged in aerial work personnel should experience regularly. Anyone who suffers from hypertension, heart disease, anemia, epilepsy and is not suitable for aerial work shall not engage in aerial work.
5. When working at high altitude, steel bars and structures, be sure to wear non-slip shoes.
6, on-site electricity, there must be someone to manage, at the same time, set up a special distribution box, it is forbidden to pick up and pull, implement the system of electricity listing, especially to put an end to illegal operation, to prevent personal, line and equipment accidents.
7, electric drills, hammers, welding machines and other electrical appliances, distribution boxes must have leakage protection devices and good grounding protection ground wire, all electrical appliances and cables must be regularly checked to ensure good insulation, and insulating shoes and gloves should be worn when using electrical appliances.
8. safe voltage with a voltage below 36V must be used for the lighting of the site construction. When all electrical appliances and tools are not in use, the power supply must be cut off at any time to prevent the equipment from burning out.
9, in the use of blowtorch, electric welding machine and the necessary place to make a fire, to fill in the registration application, guardianship by designated personnel, equipped with fire equipment, etc. , to ensure the implementation of fire control measures. When welding, special attention should be paid to check whether there are flammable materials below and make corresponding protection. After use, check that there is no fire before leaving.
10. When working at high altitude and on the construction site, such as pipeline lines and equipment installation and debugging, it is necessary to strictly implement the safety technical regulations, and it is strictly forbidden to operate illegally and smoothly, resulting in accidents that should not occur.
1 1, in the whole construction process, we must strictly implement the national, provincial, municipal and ministerial regulations and relevant regulations on engineering fire protection.
12, always complete and maintain the fire fighting equipment, so that it can be maintained and used. Seriously implement the fire responsibility system step by step and do a good job in fire control.
Extended data:
Safe construction also needs a safety system.
1, establish a safety responsibility system and implement the responsible person. Safety measures are a series of activities to plan, organize, command, coordinate or monitor the safety production of construction projects, so as to ensure the personal safety, equipment safety, structural safety and property safety in the construction process and create a suitable construction environment. In construction, we should adhere to the policy of "safety first, prevention first".
The person in charge of the project is the person in charge of the project, and the focus of control is the unsafe behavior of personnel in the construction process, the unsafe state of equipment and facilities, the unsafe factors in the working environment and the unsafe defects in management. The person in charge should carry out safety inspection before construction to eliminate unsafe factors in the bud.
2. Set up a full-time security officer to be fully responsible for the safety of construction projects, coordinate the work of project safety production, and ensure and supervise the implementation of various measures.
3. Strengthen safety education and publicity to further improve safety awareness.
4. Strengthen the management of the construction site. Adhere to the system of "three don't let go", "disclosure before construction and evaluation after construction", strengthen the safety management of electricity consumption on the construction site, and strictly implement the Technical Specification for Safety of Electricity Consumption on the Construction Site and other relevant regulations.
5, in strict accordance with the norms and procedures for construction. Employees should carry out construction in strict accordance with the construction specifications, be cautious in the construction process, put an end to all fluky psychology, and deeply realize that "safe production" is the main factor to strive for benefits.
Sogou encyclopedia-building safety
2. Field safety knowledge
1. Seriously study the national guidelines, policies and regulations on safety construction, firmly establish the idea of "safety first" and enhance the safety awareness of employees;
2. Abide by the company's three-level safety education regulations: all employees who are new to the construction site or change jobs (posts) must receive safety education before taking up their posts, and can only take up their posts after passing the examination;
Special types of work (such as electricians, welders, riggers, drivers) need to attend the professional training of the competent department, and hold relevant certificates after passing the examination;
3. The project manager or safety officer shall regularly give the following safety education to employees, and employees shall consciously receive training:
? State laws and regulations on safe construction;
? Company safety management rules and regulations;
? Mechanical and electrical equipment operation and various safety technical regulations;
? Lessons from safety accidents and preventive measures;
? Three-level (into the company, to the scene, to the post) safety education content.
Conduct a theoretical assessment of safety knowledge once a year (quarterly) and establish a safety assessment score file;
4. The project manager and safety officer shall regularly carry out safety inspection on the construction site, and every employee and post shall consciously accept the inspection and investigate and deal with unsafe factors and hidden dangers; And take immediate preventive and corrective measures.
5. When entering the construction site, you must use labor protection articles correctly, wear safety helmet, fasten your hat belt, wear work clothes and safety shoes. Safety belts must be fastened for aerial work; It is forbidden to throw tools and equipment up and down; aerial work and dangerous construction must be operated by two people;
Six. The construction site must be equipped with safety protection facilities, set up safety signs, and it is strictly forbidden to move and dismantle them at will;
7. Employees must abide by the safety construction discipline, and it is forbidden to:
? Blind and risky construction, illegal operation;
? Fighting at the construction site, having fun, and going to work after drinking;
? Special temporary power lines and special automatic electromechanical equipment; Undocumented personnel engaged in special types of work;
? Overloaded use of electrical equipment, cables and wires.
Eight. After the daily work, put away the construction tools, equipment and materials. For the completed installation project, the equipment, appliances and materials in the warehouse should be properly kept to prevent loss and theft;
9. The warehouse should be dry and free of corrosive gas, so as to prevent the deterioration, mildew and damage of the warehouse equipment and the decline of performance indicators. The warehouse should be equipped with fire fighting equipment;
10. Take seriously the accidents that have occurred or attempted on the construction site, find out the reasons, and take corrective and preventive measures to prevent accidents;
Eleven, casualties, must immediately rescue, protect the scene, truthfully fill in the accident report and statements;
12. Implement the safety reward and punishment system, give appropriate rewards to advanced individuals, and give criticism, warning and economic punishment to those who fail to abide by the safety code and refuse to change their education, until they are expelled.
3. The content of daily safety education of buildings
1. Abide by labor discipline, obey the command of leaders and safety inspectors, concentrate on their work, stick to their posts, and do not engage in operations other than this type of work without permission; Strictly implement operating procedures (including safety technology operating procedures and quality operating procedures, etc. ); It is forbidden to go to work after drinking.
2, strictly implement the operating procedures (including safety technology operating procedures and quality operating procedures, etc. ); No illegal command and illegal operation; Have the right to refuse the instruction of illegal command, and have the responsibility to stop others from illegal operation. 3, obey the command of the team leader and the site builder, obey the distribution, unite as one, * * * to complete the production task.
4, the correct use of personal protective equipment, enter the construction site must wear a helmet, fasten the hat belt; Don't wear slippers, high heels or go to work barefoot; Don't wear shoes with hard soles and nails, it's easy to slide to the sky. 5, the construction site facilities, "four" protection, safety signs, warning signs, safety operation procedures, etc. , shall not be removed or moved at will, if you want to move must be approved by the site construction director.
6. When working in the field, pay attention to traffic and mechanical hoisting. When operating the crane tripod, no one is allowed to put his head, hands or body into the derrick. After lifting, the lifting lug shall not pass under the lifting lug, and it can only enter the derrick after stopping.
Crane orchid is forbidden to carry people. 7. Don't joke or play at work to avoid accidents.
8. Children are not allowed to enter the site, and vendors are not allowed to enter the site to sell their hearts. 9. Anyone who suffers from hypertension, heart disease, anemia, epilepsy and other personnel who are not suitable for working at heights shall not engage in working at heights.
10, other basic safety knowledge, fire prevention knowledge, rules and regulations, laws and regulations, safety helmet, electricity safety, dress, appliance use safety, fire safety, etc. Building safety refers to the discussion on strengthening safety awareness and doing a good job of prevention in building construction, and there is also a Chinese book "Building Safety".
Participate in the inspection of safe production and civilized construction on the construction site, including routine inspection, special inspection and joint inspection (1). Daily inspection refers to the daily inspection organized by the project manager or the regular spot check organized by the construction enterprise. The supervision engineer shall participate in such self-inspection activities, review and sign the activity records, and urge the rectification. (2) Special inspection: According to the civilized construction management documents issued by the Municipal Construction Committee, such as digging and transporting mud and dregs, sanitation and epidemic prevention, etc.
Management information, publicity and education inspection, as well as special inspection or inspection of key projects and parts carried out according to relevant documents of superiors. (3) Joint inspection: refers to the inspection conducted by the supervision team in three stages in the construction process according to the Standard for Safety Inspection of Building Construction (i.e. the foundation, main structure and the first three stages before the project is completed).
The scoring results shall be signed by the project manager or the person-in-charge of the construction enterprise and the person-in-charge of the supervision company as the main basis for evaluating the construction safety level after the completion of the project.
4. Contents of daily safety education of buildings
1. Abide by labor discipline, obey the command of leaders and safety inspectors, concentrate on their work, stick to their posts, and do not engage in operations other than this type of work without permission; Strictly implement operating procedures (including safety technology operating procedures and quality operating procedures, etc. ); It is forbidden to go to work after drinking.
2, strictly implement the operating procedures (including safety technology operating procedures and quality operating procedures, etc. ); No illegal command and illegal operation; Have the right to refuse the instruction of illegal command, and have the responsibility to stop others from illegal operation.
3, obey the command of the team leader and the site builder, obey the distribution, unite as one, * * * to complete the production task.
4, the correct use of personal protective equipment, enter the construction site must wear a helmet, fasten the hat belt; Don't wear slippers, high heels or go to work barefoot; Don't wear shoes with hard soles and nails, it's easy to slide to the sky.
5, the construction site facilities, "four" protection, safety signs, warning signs, safety operation procedures, etc. , shall not be removed or moved at will, if you want to move must be approved by the site construction director.
6. When working in the field, pay attention to traffic and mechanical hoisting. When operating the crane tripod, no one is allowed to put his head, hands or body into the derrick. After lifting, the lifting lug must not pass under the lifting lug, and it can only enter the derrick after it stops. Crane orchid is forbidden to carry people.
7. Don't joke or play at work to avoid accidents.
8. Children are not allowed to enter the site, and vendors are not allowed to enter the site to sell their hearts.
9. Anyone who suffers from hypertension, heart disease, anemia, epilepsy and other personnel who are not suitable for working at heights shall not engage in working at heights.
10, other basic safety knowledge, fire prevention knowledge, rules and regulations, laws and regulations, safety helmet, electricity safety, dress, appliance use safety, fire safety, etc.
Building safety refers to the discussion on strengthening safety awareness and doing a good job of prevention in building construction, and there is also a Chinese book "Building Safety".
Participate in safety production and civilized construction inspection on the construction site, including daily inspection, special inspection and joint inspection.
(1) Routine inspection: refers to the routine inspection organized by the project manager or the regular spot check organized by the construction enterprise. The supervision engineer shall participate in such self-inspection activities, review and sign the activity records, and urge the rectification.
(2) Special inspection: According to the civilized construction management documents issued by the Municipal Construction Committee, such as digging and transporting mud and dregs, sanitation and epidemic prevention, etc. Management information, publicity and education inspection, as well as special inspection or inspection of key projects and parts carried out according to relevant documents of superiors.
(3) Joint inspection: refers to the inspection conducted by the supervision team in three stages in the construction process according to the Standard for Safety Inspection of Building Construction (i.e. the foundation, main structure and the first three stages before the project is completed). The scoring results shall be signed by the project manager or the person-in-charge of the construction enterprise and the person-in-charge of the supervision company as the main basis for evaluating the construction safety level after the completion of the project.
5. Who knows the common sense of site safety? Tell me ~ thank you.
Construction production is characterized by fixed products and mobile personnel, mostly working in the open air and at high altitude. The construction environment and working conditions are poor, and the unsafe factors are constantly changing with the change of the project image progress, with poor regularity and many hidden dangers. Therefore, the construction industry is one of the accident-prone industries. As the main force of urban construction, China's construction enterprises pursue the maximization of benefits while promoting social progress and urban construction. However, safety is benefit, safety is our lifeline, and safe production is the best explanation for the country and the people.
"Safety first, prevention first" is the policy of safety production in China, and safety management is an important content in enterprise management, which includes the whole process, all-round and all-staff of the construction site. Therefore, as all our safety production managers, we should pay close attention to safety production management from the height of stressing politics and ensuring stability and with a highly responsible attitude towards the country and the people. Below, I will outline the key contents of safety production supervision and management from several aspects: first, when entering the construction site, we must check whether the software guarantee materials of the project are complete, whether the safety account records are timely, whether the procedures are complete, whether the various safety production responsibility guarantee systems and the on-site safety production management network are established, and whether the safety management network is established.
A, full production responsibility system:
The so-called safe production responsibility system is to clarify the safety responsibilities of leaders at all levels and all kinds of personnel in production activities in the form of systems. It is the most basic system in enterprise safety management and the core of all safety rules and regulations, mainly including the following three aspects:
1. Safety responsibilities of leaders at all levels in enterprises.
As our construction enterprise, including corporate legal person, competent manager, chief engineer, project manager, construction team leader, safety officer and other management personnel, the responsibility system for safe production.
2. Safety production responsibilities of relevant functional departments of the enterprise.
It includes production department, technical department, mechanical equipment department, material department and so on. All functional departments are responsible for the safety production of their own departments within their respective responsibilities.
3. The safety responsibility of front-line workers.
Including: bricklayer, carpenter, rebar worker, scaffolder, welder, electrician, rigger and other work safety rules and regulations.
The project manager on the construction site is the first person responsible for the project safety production, and takes overall leadership responsibility for the project safety production. After establishing and improving the above responsibility system for production safety, it is necessary to implement the responsibility to specific personnel and conduct regular target assessment on the previous stage.
Second, whether there is a complete safety production and construction organization design scheme on the construction site, and the main contents that must be clear in the scheme.
1, overall design of safety production and construction organization
A construction site, without a complete safety production construction organization design as a guide, just thinking about where to go can not do safety production work. Before the project starts, the Safety Production Technology Department shall, according to the actual situation of the project and in combination with the specific influencing factors such as hydrology, geology, meteorology, climate and seasonal changes on the construction site, formulate a feasible safety construction organization design, which shall be implemented after being approved by the technical director of the unit. In the process of construction, corresponding adjustments and improvements should be made in time according to the special circumstances of the project.
In addition, for large-scale group projects or key projects with complex structures, special safety construction organization design should be compiled separately for projects with strong professionalism, mainly including deep foundation pit support, high-clearance scaffolding projects, formwork support, lifting and hoisting operations, etc. , and in the process of implementation according to the design of strict supervision, to prevent accidents. In 2000, the roof of the studio of Nanjing TV Station was taken lightly by the project manager because of the imprecise organization design of safety production and construction, which eventually led to unstable formwork support and collapse during concrete pouring, resulting in serious safety accidents.
2, engineering safety technical measures disclosure
Before the project starts, the project engineer shall make safety technical disclosure to the project leader, foreman and employees participating in the construction in response to the specific conditions of the project, the construction methods and safety technical measures of sub-projects. Before each subdivisional work starts, the project engineer must make safety technical disclosure for the single project, and the safety disclosure shall be recorded in the account, with the signatures of both parties and the disclosure date.
3. Pre-job training and education for body construction personnel:
All personnel involved in the construction must go through three-level safety education before taking up their posts, and special operations personnel must be trained and qualified by the competent department before taking up their posts with certificates.
With the above software assurance measures, in view of the key points of safety production in construction projects, the safety production supervision and management personnel must focus on the following hardware aspects: whether the erection of scaffolding meets the specification requirements, whether the temporary electricity consumption on site is safe and reliable, whether all kinds of construction machinery and equipment are sensitive and effective, whether the three treasures of safety are used, whether the four entrances and five exits are properly protected, and whether the above measures can effectively prevent the four major injury accidents in the construction industry (falling from a height, hitting objects, etc.).
6. What are the safety precautions on the construction site?
Original publisher: Vivi 1233 14.
What are the safety hazards in the construction site? 1. Civilized construction 1. On-site enclosure (1) part of the project is not equipped with enclosure higher than 2.5m around the construction site of main urban sections. (2) Some enclosure materials are unstable and untidy, which do not meet the local aesthetic requirements. 2. Closed management (1) has no corporate logo on some construction sites. (2) The personnel entering the construction site did not wear a complete work card. 3. Most of the ground in the construction site (1) is not hardened. (2) No drainage measures or poor drainage. (3) Most of the mud on the construction site did not precipitate. (4) Where there is no smoking on the construction site, you can smoke at will. (5) There is no greening arrangement in warm season. 4. Material stacking (1) Building materials and components are not stacked according to the general plan. (2) The name, variety and specifications of the standard brand materials of the stockyard are incomplete. (3) The materials are not neatly stacked. (4) The materials are not cleaned up after work. 5. On-site fire prevention (1) has no fire-fighting measures and no fire-fighting equipment. (2) The fire fighting equipment is unreasonable. (3) If an open flame is needed at the site, there is no hot work approval procedure or hot work supervision. 6. Comprehensive management of social security (1) There is no place for workers to study and entertain in the living area. (2) The responsibility of the public security system is not divided into people. (3) Inadequate security measures lead to theft. 7. The signs on the construction site (1) are irregular, irregular and incomplete. (2) The safety slogan is incomplete and unobtrusive. (3) There is no "seven boards and two drawings" facility. 8. There is no toilet in the living facilities (1) or the toilet does not meet the hygiene requirements (the flushing toilet does not change water). (2) The canteen hygiene is not up to standard. (3) There is no shower room or the shower room does not meet the requirements. (4) Domestic garbage has no treatment measures. 9. Health care first aid (1) has no health care medicine box. (2) No first-aid measures and equipment. (3) No first-aid personnel were trained. (4) Health and disease prevention publicity and education were not carried out. 10. Community service (1) has no dust and noise prevention measures. (2)
7. What are the safety precautions for site construction?
Original publisher: 1535088 1288.
Precautions for entering the construction site 1. Personnel entering the construction site must wear safety helmets, and personnel hanging in the air and working high above the ground must wear safety belts. 2, in the process of construction, the construction personnel must conscientiously do a good job every day after the completion of the construction work, so that the work is finished, the material is clean, and the site is clear. 3. If illegal business operations cause property losses to others, compensation shall be made according to the price. 4. Take effective measures to control the pollution and harm of dust, waste gas, waste water, solid waste, noise and vibration on the construction site. Precautions for construction safety 1 The construction personnel shall go through necessary business training and have a professional license before taking up their posts, and shall master the construction safety technology they should master. They should wear work clothes before construction. 2 Fireworks are strictly prohibited on the construction site, with corresponding fire prevention measures, equipped with necessary fire-fighting equipment and other fire-fighting equipment, and inflammable and explosive articles are not allowed to be mixed on the construction site. 3. When there are high and low spans or interchanges, the operators must wear safety belts and safety helmets. Slippers, high heels, barefoot or shirtless are not allowed to enter the construction site. 5. Don't go to work after drinking. 6, without the approval of the relevant personnel, are not allowed to dismantle safety facilities and installation device. In the process of construction, safety technologies such as aerial work, vertical transportation and health protection shall be implemented in strict accordance with the Technical Specification for Building Safety Engineering issued by the State Council and other relevant special provisions of the state. Safe and civilized construction (1) The idea of "safety first, prevention first" should be established in safe construction, so that all employees can realize the importance of safe production. 1. Construction personnel should be familiar with the safety technical operation procedures of this type of work, use personal protective equipment correctly and take safety protection measures. 2. Strengthen the management of inflammable and explosive materials such as electric welding, oxygen and acetylene to prevent fire accidents. use
8. Construction safety education content
Safety in production is the eternal theme of construction enterprises. With the rapid development of China's economy, China's socialist construction is also developing vigorously. However, it is followed by safety problems brought by construction. At present, the situation of safety production in construction sites is very severe, and construction safety has always been the top priority of national safety production supervision and management.
The three key points of safety production management control in construction site are unsafe behavior of people, unsafe state of things, unsafe factors in working environment and management defects. According to statistical analysis, more than 80% of casualties in China's construction industry are caused by unsafe behaviors and management defects such as illegal command, illegal operation and violation of labor discipline. Therefore, how to improve the safety quality and operation skills of operators, standardize their safety behavior, and finally realize the standardized operation and construction of safety is an important topic before us. At present, the education and training of construction site safety in China's construction enterprises are mainly aimed at two groups of people: construction enterprise employees and migrant workers.
As employees of construction enterprises, on the one hand, because of their high level of knowledge and strong acceptance, on the other hand, because of their relatively fixed personnel, most of them are construction managers with rich construction experience, who can receive safety education and training at all levels on time in accordance with relevant national laws and regulations, so they have a high awareness of safety production and can consciously abide by the safety production discipline on the construction site, which is the main force of safety production work on the construction site. However, as another part of the construction site, migrant workers are the weak link in the education and training of safety production of construction enterprises in China at present. There are many reasons for this. First, migrant workers have low cultural knowledge and poor acceptance. Secondly, migrant workers are more mobile; Third, some construction enterprises and professional (labor) contracting teams, driven by interests, unilaterally pursue economic benefits, have a weak sense of safety, and relax safety management, especially in the safety education and training for employees, which leads to a low level of safety technology for workers, especially for migrant workers who enter the site or transfer jobs, they go to work directly without any safety education, and special operators go to work without certificates, do not understand the operating procedures of this type of work, and do not grasp the safety technical specifications.
These people have no awareness of safety protection at all and lack the ability to protect themselves. Some migrant workers died in industrial accidents within a few days of going to work. Due to the existence of the above-mentioned status quo, casualty accidents in construction enterprises occur from time to time.
In view of these situations, combined with my own work experience, I would like to talk about my views on safety production education on the construction site. 1 Strengthen safety production education and training according to law, and improve the safety production awareness of the construction site operators. The policy of safety production management in China is "safety first, prevention first".
Safety first, that is to say, safety work should be put in the first place in all production activities; Prevention first refers to taking scientific management means and measures for production factors according to the characteristics of production activities before all production activities begin, effectively controlling the development and expansion of unsafe factors, nip accidents in the bud and nip them in the bud. Safety production education and training must take "safety first, prevention first" as the purpose, and carry out safety production knowledge and skills training for workers.
Article 21 of the Law on Safety in Production stipulates: "Production and business operation entities shall educate and train employees in safety in production to ensure that employees have the necessary knowledge of safety in production, are familiar with relevant safety rules and regulations and safety operation procedures, and master the safety operation skills of their posts. Employees who have not passed the safety production education and training are not allowed to work at their posts. "
Article 23 stipulates: "Special operators of production and business units must receive special safety operation training in accordance with relevant state regulations and obtain special operation qualification certificates before they can take up their posts." Article 46 of the Construction Law stipulates: "Construction enterprises shall establish and improve the education and training system of labor safety production, and strengthen the education and training of workers' safety production. Those who have not received safety education and training may not work at their posts. "
In order to strengthen the safety education and training of employees in construction enterprises, the Ministry of Construction issued the Interim Provisions on Safety Education and Training of Employees in Construction Enterprises, and put forward specific implementation measures for safety education and training of construction enterprises. Construction enterprises must strictly implement the requirements of relevant laws and regulations, and conduct safety education and training for employees in strict accordance with relevant regulations. At the same time, the departments in charge of production safety at all levels should strictly enforce the law, strengthen the supervision of safety education and training of construction enterprises, especially the training of migrant workers, and truly abide by the laws and strictly enforce the law to ensure the effectiveness of safety education and training of construction enterprises and realize safety production.
2. Establish and improve the safety production training and education system, and strengthen the implementation of the safety production training and education system. 2. 1 Establish and improve the safety education and training responsibility system, clarify the safety education responsibility, and implement the safety education and training system. First of all, it is necessary to clarify the responsibilities of education and training at all levels in the construction site, establish the responsible person for the implementation of safety education and training, and at the same time clarify the subject of on-site safety education-all personnel on the construction site; Secondly, it is necessary to strengthen the supervision and assessment of the responsible subject, and change posts or repel those who fail the assessment; Third, we should pay attention to cultivating the professional quality and sense of responsibility of the implementers of safety education.
2.2 Establish and improve the three-level safety education and training system and safety technical level, clarify the content and hours of safety education, strengthen the education and training of operators, and strictly follow the relevant requirements of the Interim Provisions on Safety Training and Education for Employees in Construction Enterprises. After each new worker enters the site (or changes jobs), do a good job in safety education and training and safety technical disclosure at all levels, and truly train first before taking up their posts. 2.3 Implement a safety education registration system and an assessment system, establish a safety education and training information card for each worker, and implement a one-person-one-card system, which mainly includes training content, hours, trainers, time and place, assessment results, etc.
That's right.