Model essay reference for annual work summary of machine maintenance
The work of the equipment department was completed in 20__. Looking back on this year, with the guidance and help of department managers and supervisors, my business skills have advanced by leaps and bounds. At the same time, under the direct leadership of the manager and supervisor, my work has been carried out smoothly. As an equipment man in the equipment department, I must first improve my skills in order to work better. In order to improve my skills, I want to sum up my personal work in the past year, so as to better carry out my work next year. I. Daily inspection
In the face of 24-hour uninterrupted operation of equipment, only by strengthening inspection can we better understand the health status of equipment, eliminate hidden dangers in advance, and prevent problems before they happen. Before going to work every day, I will check the operation of each fan in the paint line, check whether the motor and shaft of the fan are abnormal, and whether the fixed seat and bolt are loose or fall off; Check the heat exchanger of EN air intake system for cracks and water leakage; Check whether the water cooler works as an alarm; Check whether the air pressure, water pressure and working temperature of the incinerator are normal and whether the motor is noisy; Check whether the pressure difference of the dehydrator is within the range and whether there is an alarm (if there is an alarm, solve it according to the fault); Check whether the motor in the dewatering area is running normally (I have been monitoring the abnormal operation of a motor in the dewatering area); Check whether the chain line runs normally; Check the pressure, temperature and working conditions of four air compressors and two dryers in the air compressor room; Check the water temperature and water pressure of steam room and softened water room, and check whether the motor water pump is running normally. Through the inspection of the whole spraying line equipment, I always know the running state of each equipment, and carry out maintenance work according to the actual situation of each equipment, so as to prolong the service life of the equipment, reduce the production and maintenance costs, and finally improve the benefits of enterprises.
Second, the equipment operation and maintenance records
In addition to the inspection of equipment, I also advocate good interaction between equipment maintenance personnel and production operators, strive to realize early detection and timely maintenance of equipment defects, fully understand the temper and focus of each equipment, so as to facilitate rapid and predictable equipment maintenance, and focus on tracking the inventory of vulnerable and consumable parts and spare parts. Lubricate each refueling point of the equipment regularly, so as to avoid increasing the failure rate due to equipment wear caused by poor lubrication. I not only check the exhaust fan in each spraying room of the spraying line every day, but also regularly monitor the temperature of the fan shaft and motor with infrared thermometer and make records. Not only that, I keep records of bearings, belts, water pipe fittings, screen cotton, water pump seals and all other commonly used things. And track the inventory situation at any time, so that maintenance and replacement can be more timely and rapid. Also cooperate with department leaders to formulate work instructions, maintenance procedures, equipment operation, inspection and maintenance records, etc.
Third, the equipment maintenance
The hidden dangers I found in the normal production process of the company have been eliminated in time if they can be solved in time. Write down some problems that need to be solved when the line is stopped, and eliminate them at the first time. If it can't be solved, please consult the manager and supervisor. For example, in the middle of the year, I usually monitored the vibration of the exhaust fan in the spray booth. Under the leadership of the manager, all the fans were corrected and balanced, and the hidden dangers were solved. For the phenomenon of high conductivity of reverse osmosis equipment, I strengthened observation, increased cleaning times and replaced the filter element of security filter, and the effect was obvious. Every time I stop the line, I will comprehensively maintain the chain equipment, air intake equipment, air exhaust equipment, various circulating pumps, as well as the air compressor, dryer, dehydrator, cooler, incinerator, slag scraper, lithium bromide equipment, 2TDI system, 3TDI system and hot water circulation system of the spraying line, so as to ensure the auxiliary equipment to run 24 hours a year with low failure rate.
Fourth, skills upgrading.
I think that if a worker wants to do a good job, he must sharpen his tools first. You sharpen his tools, he should put them down first. Only by strictly strengthening the management and maintenance of equipment and changing the passive situation of equipment maintenance can the production run normally. After nearly two years of equipment maintenance, under the careful training of managers and supervisors, my skills have changed greatly compared with those when I entered the factory. I also used books and the Internet to inquire about the relevant information of my equipment, so as to learn and master their performance, safety regulations and maintenance as much as possible. At the same time, I also strengthen the study of electricians, and strive to be unique in the field of mechanical and electrical maintenance.
Verb (abbreviation of verb) needs to be improved
By improving the level of self-maintenance, we strive to save money on equipment maintenance costs, such as decomposing and repairing damaged and expensive parts, making the maintenance work detailed into parts, narrowing the fault range, maintaining the equipment with the lowest maintenance cost and avoiding directly replacing new spare parts. Reduce the number of external repairs of equipment and increase the intensity of internal repairs. For equipment maintenance, the service performance of the equipment can be ensured by changing the maintenance frequency and the downtime can be reduced.
Model essay reference for the second annual work summary of machine maintenance
Looking back on the past year, under the correct leadership of the company and the workshop, the mechanic section of the small workshop earnestly implemented the production and operation objectives issued by the company and the workshop, and through the unremitting efforts of all employees, successfully completed a total of 16550 pieces of all kinds of processed parts (the number at the end of 2008 was 1 15), and repaired and welded the anode guide rod. Always do a good job in the service of logistics soldiers to ensure the normal operation of each workshop. The main work of this year is summarized as follows: (1) Strengthening management and ensuring "safety first" in safe and civilized production is the basis of enterprise production and the premise for us to do all the work well. There are 57 employees in our workshop, who are mainly responsible for the production and processing of various workpieces and the maintenance of machinery and equipment in aluminum plant. The workplace is wide, and various types of work cross-operate, so safety production is particularly important to our workshop. Therefore, the workshop must pay attention to safety at every meeting, widely publicize the importance of safe production, remind and urge the team to pay attention to safety at all times, make the safety alarm ring, and formulate the responsibility system for workshop safety.
In June, 5438+this year 10, the mechanic section signed the 20XX Annual Production Responsibility Letter for each mechanic section of the security team with each team. The purpose is to enhance employees' sense of security, strengthen their sense of responsibility, and put an end to carelessness and luck. In April this year, under the leadership of the small workshop, a joint fire drill was organized for machine maintenance and furnace maintenance, and employees in our workshop actively signed up for it. Through this drill, the awareness of fire safety responsibility of workshop staff was further strengthened, and the joint cooperation and emergency response ability of workshops in the face of fire and other emergencies was enhanced. The workshop also organizes employees to carry out safety knowledge training and analyze, discuss and summarize major domestic safety accidents. Encourage everyone to learn, actively combine the actual situation of their respective jobs, carefully find hidden dangers and hazards around them, nip hidden dangers in the bud, and put an end to safety accidents. At the same time, we also actively participated in the company's "ankang cup" activities and "Safe Labor Competition" activities. And implement all activities to the team, and put safety work in the first place.
(2) Overcome difficulties, attach importance to scientific and technological progress, and promote the full completion of production tasks.
In 2008, after the anode guide rod was used for a long time, some steel claws of the guide rod became thinner and uneven, and the blasting block broke, which increased the repair quantity, which affected the production turnover and the high-purity aluminum workshop was rectified and put into production. In addition to meeting the daily maintenance, the guide rod class in the machine repair section stepped up the production of 585 new guide rods for the high-purity aluminum workshop to ensure the production needs of the brother units.
Since March this year, the company has carried out major minor repairs and major repairs. In response to the company's call for "cost reduction, energy saving and consumption reduction", the auxiliary workshop took the initiative to undertake some external processing tasks, such as repairing the cylinder hammer, making the cylinder adjusting bracket and repairing the cylinder cross arm, etc., which greatly saved the processing cost and reduced the production cost for the company. This year10 June 5438+03 Due to the global economic slowdown, the domestic supply of electrolytic aluminum exceeds demand, and the production and operation of electrolytic aluminum are under great pressure. In order to actively cope with the complex business situation and reduce losses, the company decided to stop production of 50,000 tons of electrolyzers, and on June 25, 2008, it requested our workshop to manufacture and install the stopped electrolyzer bus. Upon receiving the task, the workshop immediately deployed reasonably, broke the boundaries of work types, set up four working groups, and arranged the backbone as the team leader.
We in Qi Xin work together, unite as one, work continuously for more than 10 hours every day, and fight in our respective posts. Ten days later, the tired figure always appeared on every employee, but no one asked for a day off, and everyone's efforts finally paid off on June 22nd 10. We successfully completed the production and installation of the bus three days in advance, which reduced the company's losses and won the unanimous praise of the company's leaders.
(three) to improve the quality of workers as the goal, do a good job in employee education.
Cultivating a team of workers with both ability and political integrity has always been one of the priorities of the mechanical maintenance department. To this end, the workshop always puts employee training in the first place and makes unremitting efforts. As early as the beginning of the year, the workshop made an annual staff training plan, striving to work in an orderly way. In March this year, in order to improve the technical level of each type of work and enhance the practical operation ability of employees, the machine workshop specially trained welders and locksmiths in the machine workshop to "learn theory and pay attention to practice". This training is organized according to the characteristics of many returned welders and many young workers. In order to ensure the training quality and prevent the training from going through the motions, and according to the actual situation of busy production in the workshop, the training is divided into morning and afternoon classes every day, that is, everyone takes turns to train, so that everyone can study and produce correctly.
After three weeks of theoretical and practical training, everyone's business ability and professional level have been greatly improved. Workshop workers actively learn job skills and participate in mass "five small activities". This year, the workshop workers have put forward a number of rationalization proposals to the company, such as "320-ton split hydraulic jack guide rod straightener reform", "G4250X70 sawing machine clamping device repair", "multifunctional elastic shock-absorbing arbor", "high-purity aluminum adjusting bracket reform" and "U-shaped plate high-efficiency plate bender", which reduced the labor intensity for the company.
(four) to strengthen the ideological and political work of workers, and fully mobilize the enthusiasm of workers. In our daily production activities, we always do a good job in ideological and political work around production and construction, which greatly mobilized the enthusiasm of employees. In the first half of this year, the workshop formulated a secondary distribution scheme of benefit wages based on working hours. This scheme embodies the distribution mode of getting more for more work, reasonably distributes the income of employees, fully mobilizes the enthusiasm of employees, and has achieved certain results.
Reference to the model essay on the annual work summary of the three-machine repair.
20xx years have passed. During this year, I deeply realized the sweat and happiness of this job. I devoted myself to the machine maintenance that I love. This year's work has ended and gained a lot. Let me write a little about this year and set new goals for next year's work. First, ideological understanding
During this year, as a mechanic, I was strict with myself ideologically, I loved my career, I was strict with myself, I pushed myself, and I tried to think that this comrade could bear hardships, be not too dirty and tired, work hard, and never delay from the beginning. I can take the initiative to participate in the equipment installation process. Over the years, I have successfully completed all the work arranged. I believe that in my future work, I will overcome my own shortcomings and make greater progress through my own efforts with the care of my leaders and the help of my colleagues. Next year, I will work harder, study harder and practice harder.
Second, the maintenance work
In terms of maintenance work, the task this year is very heavy, and there are several holidays. For the hoisting and normal installation of equipment, the company has arranged overtime, but in any case, in order to improve my maintenance level, I insist that the more I work, the better my maintenance technology will be. At ordinary times, we also strive for every maintenance opportunity at work. I consult my colleagues' maintenance experience, and I usually chat with my colleagues to learn. This year's work is over, and next year's work is also the beginning of tension. These are mostly jobs that need to be done seriously. We should learn from the work and understand and accumulate work experience every time.
Third, the system
While doing all the work well, strictly abide by the company's rules and regulations. Be strict with yourself. Handle the relationship between business and personal affairs, be careful about the interpersonal relationship of colleagues and avoid blushing with colleagues again. Next year, I will be more diligent, work harder, abide by the company system as always, learn the company system, study professional knowledge harder, and make my business level go up a storey still higher.
Fourth, safety work
Safety is the key point. Whether it is work or life, life safety and mechanical safety need our constant attention. This year, there have also been some individual safety accidents at work, and some have been slightly stumbling. These small problems prove that there is still some negligence, insufficient attention to the progress of road sections, and insufficient safety awareness to consider road sections. In the future work, it is necessary to make up for the security risks that are not fully considered and the details are not fully considered. It is necessary to seriously study safety regulations, safety production and safety precautions, pay attention to safety, ensure that equipment safety accidents and life safety accidents do not occur, and eliminate some safety hazards. Even in life, we should not relax our personal safety.
To sum up the above points, there are still many shortcomings. We should strengthen our study in next year's work and better complete the work in 20xx.
Refer to the model essay on the annual work summary of the fourth engine repair.
Time flies, 20xx years have quietly left us in a blink of an eye, and we are greeted by a brand-new year. The coming year is also a major turning point in my life for me. On August 4th this year, I entered Tianzhichen Machine Maintenance Branch, which marked the end of my student days and the beginning of my maturity and independence. In these few short months, with the care and guidance of the leaders and the support and help of my colleagues, I have worked hard to complete my daily tasks. If I don't understand, I will ask my master and colleagues in time to correct the mistakes caused by my unskilled work. This job is my first job since graduation, and it is also a pillar of my growth, so I will put my passion into the cause of mechanical maintenance that I love. This year's work and study are summarized as follows: 1. Ideological understanding.
I have been working for four months. As a mechanic, I am strict with myself ideologically and love my career. I am strict with myself at ordinary times and take the initiative. Because you are unfamiliar with your work, you should push yourself and work hard at ordinary times. Only by working harder and suffering more than others can we be qualified for this job earlier. And the industry I am engaged in is the chemical industry, which is a high-risk industry. Therefore, in normal times, we are required to establish a firm safety awareness, abide by various rules and regulations formulated by the factory, be extra careful in the work process, and strive to do a good job in safety production.
Second, experience and gains.
Although I haven't been engaged in machine maintenance for a long time, with the help of leaders and colleagues, I have learned a lot in the process of equipment maintenance and normal work. To sum up, there are the following aspects:
(1) No matter what you do, carefulness is a necessary prerequisite for completing the work. My maintenance class is responsible for the maintenance and management of all power equipment in the glycol and furnace gas areas of our factory. In the daily inspection work, it is the main content of our work to carefully check the equipment and treat every subtle problem seriously. Only by dealing with minor problems in a timely and serious manner can we avoid unnecessary labor and energy in the future, do everything around us carefully and ensure that there will be no problems in our work, which is also a necessary guarantee for the smooth production of our factory.
(2) Actively integrate into the collective and unite as one to do a good job. Every task of machine maintenance depends on the team. Colleagues help each other and rely on each other, so that our work can be completed with good quality and quantity, and our enterprise can develop more vigorously.
(3) Only by strengthening the communication between colleagues can we learn more knowledge and skills, which is especially important for our new employees. If you don't understand anything, ask the master and colleagues humbly, discuss problems with each other, and integrate innovative ideas into your daily work. This will not only improve your work efficiency, but also improve your knowledge and skills.
Three. Work plan for the coming year
As a new employee, there will inevitably be many mistakes and shortcomings in my work, so from now on, I will definitely strengthen the study of professional knowledge and skills, constantly improve my overall quality, and actively participate in various activities and learning and training organized by the company. Can study hard, constantly enrich their knowledge and experience, keep up with the excellent employees in the factory, and strive to become a qualified and excellent mechanical maintenance technician under the condition of successfully completing the work tasks.
The fifth chapter is the model essay reference for the annual work summary of machine maintenance
After I graduated from high school, I began to study mechanical repair on March 19xx. I used to work as a mechanical maintenance worker in Hebei Railway Bureau. 19xx went to the towing team of the former port authority machinery company as a mechanic. 1 13, the group company set up a grocery operation area and transferred to the company to continue to be a mechanic and repairman. The professional and technical work in recent years can be summarized as follows: 1. Political progress is needed.
Over the past few years, I have actively participated in various classes, made full use of my spare time to learn the party's line, principles and policies through magazines, newspapers, computer networks and TV news, and supported the party's leadership, the socialist system, the policy of reform and opening up, the love of repair work, and the affection for the units I serve.
Second, pay attention to learning at work.
If you can learn and master new technologies, new knowledge, new standards and new norms in time and apply them in your work, you should persist in strengthening the study of mechanical repair business according to the needs of your work and apply the skills you have learned to practical work, so that your business level will be greatly improved and your business ability will be strong. In recent years, I have been engaged in technical work in many positions, and I can obey the arrangement of leaders according to the needs of my work. I used to work as a mechanical maintenance worker in the second place of the Third Railway Bureau in Shijiazhuang City, Hebei Province, and my major was the repair of mechanical transmission machinery. No knowledge of hydraulic transmission machinery maintenance and troubleshooting. 19xx worked as a mechanic in the towing team of the former port authority machinery company. I feel great pressure on the repair technology. Through company training and teacher's guidance, I have a new understanding of hydraulic machinery. But I don't know the vernacular in my daily work, so I took a lot of detours. Therefore, I think that if you want to learn the repair technology of port machinery well, you must know how to listen to the vernacular. Therefore, we should communicate more with our workers at work and learn more from them after work.
I am not afraid of being dirty and tired when I go to work, and my technology has also made great progress. I can eliminate some faults by myself, which makes me more confident and motivated when I study mechanical repair technology. 19xx conducted business skill assessment and grading in my north operation area, and after the assessment, I obtained the level of skilled worker. However, in daily work, I feel that my skills still have a certain gap. I read a lot of books on port machinery maintenance, repair and troubleshooting, and made clear the problems in my work, which improved my skills. I applied for this major again. After many examinations and assessments, I obtained the professional level, which made me more enthusiastic and confident about the maintenance work.
Third, do a good job of passing, helping and bringing.
1 13 years 10 13 days, the group company established the grocery business area, and I was transferred to the company. Because the operation area has just been established, and there are few maintenance personnel, all our machinery is operated in the north, mostly old machinery, which is higher in repair rate. In May, a group of new employees were recruited in the operation area, which supplemented the shortage of maintenance personnel. However, they are unfamiliar with their own business and cannot work alone. The manager in charge of machinery asked me to take two apprentices. I patiently taught them repair techniques, not only in theory, but also in some places. At the same time, I also taught them some principles of being a man, so that they can like this job quickly. After more than three years, they not only worked alone, but also became the backbone of repair. I brought a new apprentice in August, and now I can complete the troubleshooting of some common faults. In April, we recruited several new employees in the operation area, and the leader of the operation department asked me to bring a new employee. So far, I have brought four apprentices. In the process of leading new employees, I am conscientious, combining theory with practice, so that new employees can get in touch with each other quickly and easily in the learning process, and I have constantly enriched myself in the process of leading new employees in recent years.
Fourth, technical excellence.
Because of the development of the times and the progress of society, some high-tech products are constantly added to the dock production machinery. I feel that although I have brought a few apprentices, I must continue to strengthen my study and learn new skills, so as to continuously improve my overall technical level of repairing internal combustion engines and complete the tasks assigned to me by the leaders in the operation area. In my work of repairing 10, the most impressive problem is the troubleshooting of forklift trucks in Dalian, where I work now. I hung up the pitch controller twice five days a week. The first time, it was the oil leakage of the variable distance device. After two days of maintenance and assembly, oil leakage was eliminated during trial operation, and the workshop was opened for first-line production. But in less than 4 hours, the driver's master drove the 8 forklift back to the workshop for repair, and the repair list said (fuel injection became shorter, driving was weak, and hydraulic oil temperature was high). The oil temperature is high, and the driving force is weak, which has appeared in previous work, but I can't figure it out because of the oil injection at the exhaust port of the variable distance device. After many thoughts and considerations, I personally checked the faults part by part. It is found that the high temperature of hydraulic oil is the phenomenon that the oil return valve of reducer sometimes gets stuck. Debugging after assembling crane, the oil return is normal, the oil temperature is high, and the oil injection fault is eliminated.
But I didn't trust to drive out and check back, and found that the phenomenon of oil injection still existed, which made me very confused. After coming home from work, I rummaged through relevant books, but I still couldn't find a way to troubleshoot. When I went to work the next day, I arranged the work of this group and started the trial operation of forklift No.8. During the test run, it was found that there was no spray when driving at low speed, and there was oil spray when driving at medium speed, but it was not big, and it was high when driving at high speed, so I ruled out the fault that the main bearing itself became shorter. Because of shortening, turbine, pump wheel and guide wheel, I have checked and repaired them, so I have eliminated my own fault, which makes me shift my goal to two pumps with variable distance connection, one is a traveling pump and the other is a directional pump. I unloaded two pumps. After inspection, there is no problem with the directional pump, and the oil seal on the output shaft of the walking pump is worn. After replacing the oil seal, I assembled a shortening device, and the fault was eliminated during the test run. The reason is that when the driving pump runs at high speed, high-pressure oil is connected in series with the variable distance device, which makes the abnormal oil pressure rise in the variable distance and the oil is ejected at the exhaust port. Through this troubleshooting, I understand that as a maintenance technician, I should always improve my technical level and strive for perfection.
V. Professional training:
Due to the need of work, I was organized by my unit to attend the advanced seminar on hydraulics in Guilin on June 5438+February 65438+September 24, and learned the fault diagnosis of hydraulic system from it. After coming back, I applied what I have learned, which made me avoid detours in my work, improved my work efficiency and ensured the production of cars, thus making me more convinced that science is the primary productive force. At the same time, in daily work, in addition to doing well the work of the class, actively cooperate with the captain to do some daily work of the maintenance team.
The above is a brief description of my technical work in recent years. Through learning from books, learning from practice, learning from others, plus my own analysis and thinking, I have indeed made great gains and progress. However, achievements and shortcomings coexist, and experience and lessons keep pace. Overcome shortcomings and learn endlessly. In the future, I will, as always, go all out in my work, keep learning, strive for progress, constantly improve my professional quality, exercise my working ability, sum up experience and learn lessons, do my work better, serve the training and care of the unit, and contribute all my energy to the unit and the port cause.