Mobile phone screen pressing: when changing the screen, you need to use professional tools to flatten it. If you don't do it well, it will press something on the phone, causing the screen to be insensitive.

Screen pressing method steps:

1. Disassemble the mobile phone, heat the screen frame for 5 minutes, and then separate the lower display screen from the frame with a double-sided blade and a single-sided blade for synthesis.

2. Carefully separate the monitor from the frame.

3. Use a 0.08mm diamond wire, suck it with a separator, then carefully separate the touch screen, and then remove the glue.

4. After separation, connect the motherboard to start the test display, and then glue it after it is normal.

5, clean, dust-free, and then paste the glue, paste the glue must pay attention to no bubbles, or defoam with defoamer for 5 minutes, if it doesn't disappear, the tool can't fit, tear it off and paste it again.

6. Carefully test the touch effect before bonding, and test yourself before bonding to prevent rework. Put it in the laminator and start pressing the screen.

7. When the defoamer temperature is 50 5 minutes, put it on the fitted screen and start the switch until the defoamer automatically deflates, and then take out the finished product for installation.