One year's work as a workshop technician has strengthened my understanding and mastery of the company's electrical system, improved my ability to independently analyze and deal with various accidents in some systems, and laid a good foundation for my further electrical technical work. The work of the past year is summarized as follows:

I. Staff training

Training employees has always been one of the main tasks of the workshop. The technical level of employees is related to the efficiency of workshop maintenance equipment. I have also done a lot of work in this regard. I trained all electrical maintenance personnel, instrument maintenance personnel and electrical operators in the electrical instrument workshop. The main contents of the training include basic electrical knowledge, parameter setting of frequency converter, common faults and troubleshooting methods of soft start, principle and usage of DC bridge, etc. In September, all electrical maintenance personnel, instrument maintenance personnel and electrical operators were assessed, which achieved the expected goal of training.

Second, the workshop parking maintenance

According to the company's shutdown plan and the problems found in the daily electrical maintenance of the workshop, make a feasible electrical maintenance plan and put forward an application plan for replacing spare parts. After the workshop audit, further improve the maintenance plan, and determine the task points, work objectives, maintenance time, maintenance responsible person, safety precautions, maintenance quality standards and specific maintenance personnel for each maintenance work. The responsibilities of workshop technicians to provide technical support and on-site quality spot checks are clarified, and workshop assistants are responsible for the second spot checks and the approval of maintenance quality. In the process, I strictly perform my duties and go to the site for maintenance every day. On the premise of providing technical support for electrical maintenance and operation personnel, I effectively ensured the maintenance quality and ensured that the maintenance work reached the quality standards. After the overhaul, we summarized the overhaul work, summed up the advantages and disadvantages of the overhaul work, and extended it to the whole workshop to provide experience accumulation for similar work in the future.

Three. Collection and arrangement of equipment data

I pay attention to the collection of all kinds of electrical equipment data in project management. Although the construction of most workshops has come to an end, due to the shortage of personnel, there are many problems in the production and improvement of completion data, which leads to the failure to report the completion data to us as soon as possible. In this regard, I negotiated with the construction party.

In the future, I will coordinate the relationship with other technicians, formulate unified training objectives, incorporate training into employees' performance work, establish an interactive platform between employees and technicians, and formulate a standard template for each job, so that every job can be based on evidence, and improve the work efficiency of the team on the basis of standardization.

Summary of the work of the technical department of the second company

In the past year, I have been working in the project department, responsible for on-site management and technical guidance of electrical construction. Under my own efforts and leadership, I was promoted from an ordinary electrical supervisor to a part-time technician in the electrical instrument workshop. Although the workload is much heavier than before, it provides me with an opportunity to fully understand the whole electrical system of the factory, strengthens my understanding and mastery of the electrical system of the factory, improves my ability to independently analyze and deal with problems when various accidents occur in some systems, and lays a good foundation for my further electrical technical work. Next, I will summarize my work as a workshop technician this year.

I. Understanding and attitude towards the work of electrical instrument technicians

After I was appointed as an electrical instrument workshop technician, I began to gradually enter this role. Although I once worked as an electrical equipment clerk in a limited factory, I have a deep understanding and mastery of high and low voltage electrical technology and equipment. However, since I came to the new construction site, I feel that in the process of electrical supervision, the pressure to be a qualified electrical instrument technician is increasing.

The number of electrical equipment in the first factory is huge; There are many kinds of electrical equipment, involving high and low voltage transmission, distribution, transmission and electrical maintenance. The mixing of old and new equipment increases the probability of electrical equipment failure and the difficulty of troubleshooting. Faced with this pressure, I feel a great responsibility. Providing technical support for the normal and stable operation of electrical equipment in the factory and handling sudden failures have become my focus. I believe I have the ability to do this job well. The greater the pressure, the greater the motivation. In addition, I also communicate with the maintenance group, operation group and instrument group in the workshop to understand the knowledge level of existing employees and the technical problems that need to be solved in the current work.

Second, this year's work content

_ _ The workshop centrifuge cannot be started when the material is full. I went to check and found that the centrifuge was too heavy to start. The output power of frequency converter can't overcome this torque, and the centrifuge can't start. After understanding the working reason, I reset the starting torque of the inverter and put in DC braking resistor, which extended the starting time and ensured the normal use of the centrifuge. _ _ The circuit board of the main hot water solenoid valve in the workshop is often broken. I think the working power supply is polluted by DC appliances such as frequency converter, which leads to voltage superposition and high voltage, which leads to breakdown of the working circuit board. Therefore, I suggest that the workshop install a voltage regulator to supply power to the instrument and equipment alone, so as to ensure the safe use and stable operation of the instrument and equipment. These are just a small part of my daily work. Such sudden accidents often happen. When I need to deal with them, I am always the first to come to the scene, and try my best to troubleshoot the workshop as soon as possible and restore the normal operation of the equipment.

Third, the shortcomings in the work and the next work goal

In this year's work, I have made some achievements through my own efforts. But I feel there is still a big gap from the standard of an excellent technician. This is mainly manifested in the following aspects: in the sudden accident, I am not particularly familiar with the performance of some new equipment, and I need to find information, which affects the timeliness of equipment troubleshooting; The establishment of equipment files has not been carried out, mainly because the completion data is not perfect, and taking charge of the project takes up a lot of my energy. In this work, I feel a little overwhelmed; Training has not been included in the standardization system. Although training has been carried out now, it is easy to reduce the effect of normal training due to lack of coordination. The team's equipment standardization management work has not been grasped, resulting in the team's work efficiency has not been further improved.

In view of these shortcomings, I intend to continue to strengthen my study, thoroughly understand the new equipment as soon as possible, and impart these new knowledge to employees as soon as possible, so as to improve the accuracy and efficiency of troubleshooting the overall electrical equipment in the factory.

Summary of the work of the technical department of the third company

What have you gained, learned and felt from working as a technical supervisor in the company for one year? The following is a summary of the work in the past year:

I. Feelings and experiences

1, attitude is everything. You must be meticulous and careful when you work. A clerk works in the company most of the time, which requires him to be careful during this time and not to make mistakes all the time. Check the results of his work to make sure that nothing is lost. At work, I have always maintained great enthusiasm for my work. I not only successfully completed my work tasks, but also often sum up experiences and lessons after work to continuously improve my work efficiency. Although I will make some mistakes in my work and will be criticized by the leaders, I think these mistakes and criticisms will make me cautious in my future work and improve my work efficiency. During the time I worked with you, I was deeply moved by their passionate work style and learned a lot from them that I lacked.

2. Be diligent in thinking. In the post, we should be diligent in thinking, constantly improve our working methods and improve our work efficiency. The daily work of the company will be tedious, and it will be boring in a few days. It's just that I need to think more, constantly try to improve my working methods, improve my work efficiency and reduce the time required for my work.

3. Keep learning. We should constantly enrich our professional knowledge and skills. This will make my work more handy. If a person wants to make a difference in his post, he must be familiar with his professional knowledge and master the business skills within his business scope in order to be a qualified technician.

Second, the main experience and gains

In the technical analysis department for half a year, I have completed some work and made some achievements. To sum up, I have the following experiences and gains:

1. Only by putting yourself in a correct position and trying to be familiar with the basic business can we better adapt to the work.

2. Only by actively integrating into the collective and dealing with all aspects of relations can we maintain a good working condition in the new environment.

3. Only by adhering to the principle of implementing the system and carefully counting the inventory can accurate technical analysis be made.

4. Only by establishing service consciousness and strengthening communication and coordination can we do our job well.

In this half year's work practice, I participated in many collective work and got along very well with my colleagues. In this process, I strengthened the most precious and important team consciousness. On the basis of trusting yourself and others, the team will be invincible if they have unified thoughts and actions. Every step of the work should be precise and meticulous, and strive for refinement. Under the guidance of this mentality, I have achieved satisfactory results in my usual work. Being able to act positively and confidently is my mental progress in the past six months.

Now I often calmly analyze myself, recognize my position and ask myself how much I have paid; Always remember that the work content should be precise and accurate, and personal gains and losses should be vague; Avoid risks in time, and be brave enough to take responsibility when problems arise.

To sum up: in this year's work, I have come into contact with many new things, produced many new problems, and learned a lot of new knowledge and experience, which has improved my ideological understanding and working ability. In my daily work, I always ask myself to proceed from reality, adhere to high standards and strict requirements, and strive to improve my professional quality and moral quality.

Third, there are shortcomings.

After a year's work and study, I also found that I still have a gap from a professional, mainly reflected in the immaturity of work skills, work habits and work thinking, which is also the place where I will constantly hone and improve myself in my future work. To sum up carefully, I have failed to do well in the following aspects during my one-year work:

1, the organization of the work is not clear enough, so we should prioritize.

In the case of short technical service time and many things, there must be a detailed and clear plan, some need to be completed immediately, and some can be completed slowly. I have made great progress in planning this year, but there is still a lot of room for optimization.

2. Not familiar with the process.

In one year's work, I found that there were many cases where I didn't know how to start because of process problems, including mistakes and omissions, and there were places that were not considered in the design at that time, and the control of this piece was obviously not enough.

This work is not detailed enough.

The usual working distance of fine chemical industry lacks a process of introspection, renewal and modification at any time. Although the work is often reviewed and summarized, it lacks regularity. For example, if the market analysis is updated at any time, it may lead to mistakes elsewhere. In the future, we should set aside special time for summary and reflection in our personal work, so as to be refined.

4, the way of working is not flexible enough

In the process of development, we should make full use of the resources around us and ask for the support of other departments or personnel. Don't take things into your own hands. First, it affects the progress, and second, it cannot guarantee the quality. Prioritize things, grasp the main contradictions, draw a clear line, and think clearly about what your job is, what help you provide and what you want to do. How to communicate with other departments, how to communicate with employees in this department, how to communicate with customers, and how to provide quality services without doing more things outside our responsibilities are the places we need to focus on communication and learning in the future.

In the future work, I will always pay attention to correcting my shortcomings, and I will certainly develop good work habits and grow into an excellent professional in the company.

Fourth, the direction of your own efforts in the future

1, there is no end to learning. I will persistently learn all kinds of technical knowledge and use it to guide practice.

2. It's not enough to talk without doing. In the future work, I will continue to learn knowledge, and constantly improve my skills by watching, learning and practicing. Only in this way can we constantly enrich ourselves and not be eliminated in advance by this highly competitive society.

3, constantly exercise their courage and perseverance, improve their ability to solve practical problems and communication skills, in the process of work slowly overcome impatience, positive, enthusiastic and meticulous treatment of every job.

Verb (abbreviation for verb) What to do next?

In view of the shortcomings in the work in _ _ _ _, in order to do a good job in the new year, the following aspects should be highlighted:

1. Actively coordinate with employees to further straighten out the relationship.

2. Strengthen the study and improvement of management knowledge, innovate working methods and improve work efficiency.

3. Actively improve yourself, strengthen the study of technical analysis knowledge and improve the accuracy of technical analysis.

4. Go all out to do your job and set an example for the employees of the company.

In next year's work, I will continue to work hard, report my thoughts and feelings to the leaders, and correct and make up for my shortcomings and defects in time. We need unity to strengthen our work and cooperation to achieve success and push our work forward! In fact, it is said that "the difficulties in the world begin with ease, and the great things in the world begin with detail." As long as we work harder, communicate more and have a stronger sense of responsibility, I believe the company will become stronger and stronger. I believe: under the correct leadership of the superior, the company's tomorrow will be better!