2. The rubber gasket of the drain pipe under the ball valve is aging and the seal is not tight.
3. The joint between the spherical floating ball of the water tank and the water inlet switch is loose, the floating ball is in place, and the switch is not turned off, resulting in continuous water inlet and flowing out of the vertical drain when the water is full.
The water tank always leaks, and new discoveries will be made in the following aspects:
Check the water tank cover; When the owner finds water leakage, he should first observe whether the water tank cover has been closed tightly. If not, he should buckle it in time to avoid more serious water leakage.
Check the inside of the water tank; If the owner finds that it is not the case that the water tank cover is not tightly covered, he can remove it and inject gas into it. Even if the tire has a puncture, he will inject air to check the leaking place, and the water in the water tank will leak out under pressure, so as to know the leaking place of the car water tank, and then the owner will choose to repair or replace the water tank.
Check the engine oil; After the inspection, the car mainly opens the oil cover to see if there are any traces of emulsification in the oil. If there are traces of emulsification, he should ask for rescue or go to the 4S shop for repair in time.
Leaking agent should be added when water leaks during driving; In the process of driving, if the water tank is broken due to traffic accidents or violent vibration, a strong plugging agent can be added to the water tank.