Main equipment and performance of comprehensive wiring training room

Liquid crystal touch screen copper cable training frame WZ-DCTP 12 1

19-inch single-connection open architecture, the overall size is not less than 530mm long *585mm wide *2000mm high, and the power supply is connected by 220V AC system, which has the function of leakage protection. The tester has a 7-inch LCD touch screen, which can test four network cables, 568A line sequence, 568B line sequence and cross line sequence at the same time. The test results can be displayed in true color, keeping each core wire. The core components are 7-inch LCD touch screen network test training instrument, 7-inch LCD touch screen network terminal training instrument, 4 groups of RJ45 tests and 48 groups of terminal tests, and the LCD equipment adopts embedded operating system; The LCD touch screen shows the faults of cable jumper, reverse connection, short circuit, open circuit, etc. The copper cable can be detected through the network integrated wiring engineering wiring teaching and training system V 1.0. Support network wiring equipment, voice wiring equipment, line classification equipment and data exchange equipment, and can carry out basic link training and permanent link or channel training; Can carry out 2-3 students at the same time; This product is based on typical tasks and key skills training, simulating typical engineering tasks, floor installation, vertical operation, stable and practical, and specially designed for teaching and training.

Training function:

(1) copper cable permanent link installation and termination training, realizing simulated floor FD-TO permanent link training platform.

(2) Training of wiring relay link termination can be carried out.

(3) Wiring marking training.

(4) The network and voice training links are trained by cross-interconnection.

(5) Acceptance test and positioning technology training.

(6) Demonstration and troubleshooting training of common wiring faults.

(7) Wiring training, data transmission and printing training

(9)RJ45 crystal head crimping and standard jumper production training.

(10) Training on network information module crimping and telephone information module crimping.

(1 1) Network rack and equipment installation training.

Telephone switching system installation training.

(13) Workspace subsystem and information port installation training.

(14) Management subsystem installation training.

(15) Each piece of equipment can be practiced by 2-3 people at the same time.

LCD Touch Screen Copper Cable Training Platform WZ-DCTP 12

Triple open building, the overall size is not less than 1750mm long *700mm wide * 1800mm high; Wiring and power supply adopt 220V AC system with leakage protection function. The tester is equipped with a 7-inch LCD touch screen, which can test four network cables at the same time, and can test 568A line sequence, 568B line sequence and cross line sequence. The test results can be displayed in true color, keeping the on-off state of each core, and displaying the results in true color in the wrong sequence state; The core components are 7-inch LCD touch screen network test training instrument, 7-inch LCD touch screen network terminal training instrument, 4 groups of RJ45 tests and 48 groups of terminal tests, and the LCD equipment adopts embedded operating system; The LCD touch screen shows the faults of cable crossing, reverse connection, short circuit, open circuit, etc. Copper cables can be detected through the network integrated wiring engineering wiring teaching and training system V 1.0. Support network wiring equipment, voice wiring equipment, line classification equipment and data exchange equipment, and can carry out basic link training and permanent link or channel training; The training system of simulated workspace includes various standard information points of single port, double port and optical fiber. The back of the training platform adopts 6* 12U pre-anchor plate, which is convenient to simulate the wiring of trunking and conduit horizontal subsystem and the wiring of information points. Can train 4-6 students at the same time; This product is based on typical tasks and key skills training, simulating typical engineering tasks, floor installation, vertical operation, stable and practical, and specially designed for teaching and training.

Training function:

1, Weizhong second-generation LCD touch screen copper cable wiring training platform, integrated wiring system, and various permanent link training. The training instrument is composed of distribution frame, jumper frame and jumper. Carry out all kinds of permanent link termination training, and master the termination engineering technology and operation skills skillfully.

2, Weizhong second-generation LCD touch screen copper cable wiring training platform network module wiring termination principle training. Every time the LCD touch screen is terminated, it has corresponding instructions, which can directly display the electrical connection status and wiring sequence, and can directly display and judge. Faults such as cross connection, reverse connection, short circuit and open circuit.

3. The production and testing of jumper wires in the data center of Weizhong second-generation LCD touch screen copper cable wiring training platform. At the same time, four network jumpers are measured, and the LCD touch screen visually displays the electrical connection status and line sequence of terminals, which can intuitively judge the faults such as jumper, reverse connection, short circuit and open circuit.

4. Weizhong second-generation LCD touch screen copper cable wiring training platform. Training on cabinet installation and wiring termination technology in data center wiring subsystem management room.

5, Weizhong second-generation LCD touch screen copper cable wiring training platform data center horizontal subsystem tube/slot wiring technology training.

6. Weizhong second-generation LCD touch screen copper cable wiring training platform, data center workspace subsystem network socket installation training.

7. Weizhong second-generation LCD touch screen copper cable wiring training platform network link test platform function.

8. Weizhong second-generation LCD touch screen copper cable wiring training platform data center open-shelf training function.

9. Weizhong's second-generation LCD touch screen copper cable wiring training platform truly shows the complete function of data center wiring system.

Lcd touch screen optical cable training rack WZ-DCFC22 1

19-inch single-link open architecture, the overall size is not less than 530mm long *585mm wide *2000mm high. It is powered by 220V AC system wiring and has the function of leakage protection. Comprises an optical fiber test trainer with a liquid crystal touch screen and a 7-inch liquid crystal touch screen for displaying test results. At the same time, the attenuation value of the measured optical fiber is displayed accurately in real time, and the on-off state of the measured optical fiber is displayed by icons and images. It supports four kinds of optical fiber wavelength selection: 850nm, 980 nm, 13 10 nm,1550 nm * * *, which can detect the attenuation and on-off of optical fiber jumpers and test four groups of optical fibers at the same time. Be able to carry out training in workspace subsystem, horizontal subsystem, equipment subsystem and optical fiber link construction. Support optical fiber wiring equipment, optical fiber connection coupling equipment SC/FC, network wiring equipment and data exchange equipment, and can carry out basic link training and permanent link or channel training; The training function and testing function are all modularized, and 2-3 students can be trained at the same time; This product is based on typical tasks and key skills training, simulating typical engineering tasks, floor installation, vertical operation, stable and practical, and specially designed for teaching and training.

Product configuration:

Technical specifications of serial number category

1 product model WZ-DCFC22 1

Overall dimensions are 1.8m long and 0.6m wide.

3 voltage ∕ power AC 220V∕50W

4 Support list

1. Modular multifunctional shelf-1 set.

2. Network line pressing experimental instrument-1.

3. 1 10 communication jumper -2 pieces.

4.24-port category 5 unshielded modular distribution frame-1.

5.24-port Category 5 unshielded fixed-port distribution frame-1.

6. Six unshielded modules -2.

7. LCD touch screen optical fiber tester-1.

8. Network Wiring Ring -2

9.PDU power socket-1 (optional)

10. Parts/tool tray-1 piece

1 1. Combined optical fiber distribution frame -2.

5. Number of trainees. Each piece of equipment can train 1-2 people at the same time.

6 training course 12 class hours (RJ45 header and patch panel termination, jumper test

Training function:

1, network termination and wiring experiment. Every time the corresponding indicator light is turned on, the connection status and wiring sequence of the terminated cable can be displayed intuitively, and the faults such as jumper, reverse connection, short circuit and open circuit can be displayed and judged intuitively.

2. The network jumper production and test experiment can measure multiple data jumpers at the same time, and can intuitively judge the jumper, reverse connection, short circuit and open circuit.

3. Test link termination and experiment. The experimental instrument is composed of network distribution frame, optical fiber distribution frame, communication jumper frame and jumper. , and carry out various test link termination training to simulate the wiring termination engineering skills in the network cabinet.

4. The optical fiber distribution frame completely conforms to the engineering practice and has SC and ST interfaces. Students can master basic wiring and optical fiber connection skills through practice.

WZ-DCFC223, an optical cable training platform with LCD touch screen

Triple open building, the overall size is not less than 1750mm long *700mm wide * 1800mm high; It is connected with 220V AC system for power supply and has the function of leakage protection. Comprises an optical fiber test trainer with a liquid crystal touch screen and a 7-inch liquid crystal touch screen for displaying test results. At the same time, the attenuation value of the measured optical fiber can be displayed accurately in real time, and icon images can display the on-off state of the measured optical fiber, which supports 850nm, 980 nm, 13 10 nm *. Be able to carry out training in workspace subsystem, horizontal subsystem, equipment subsystem and optical fiber link construction. Support optical fiber wiring equipment, optical fiber connection coupling equipment SC/FC, network wiring equipment and data exchange equipment, and can carry out basic link training and permanent link or channel training; The training system of simulated workspace includes various standard information points of single port, double port and optical fiber. The back of the training platform adopts 6* 12U pre-anchor plate, which is convenient to simulate the wiring of trunking and conduit horizontal subsystem and the wiring of information points. All training functions and testing functions are modular, which can train 4-6 students at the same time; The wiring teaching and training system V 1.0 can detect the connection and disconnection of optical cables. This product is based on typical tasks and key skills training, simulating typical engineering tasks, floor installation, vertical operation, stable and practical, and specially designed for teaching and training.

Training function:

(1) optical fiber permanent link installation and termination training, and realize FD-TO permanent link training platform for simulated floors.

(2) Optical fiber backbone link termination training can be carried out.

(3) Cross and interconnection training of optical fiber training links.

(4) Acceptance test and positioning technology training.

(5) Optical fiber cabling common fault demonstration and troubleshooting training.

(6) Optical fiber wiring training data transmission and printing training.

(7) Optical fiber rack and equipment installation training.

(8) Installation training of data center workspace subsystem and optical fiber port.

(9) Installation training of optical fiber subsystem in data center management area.

(10) Each piece of equipment can be practiced by 4-6 people at the same time.

Product configuration:

Serial number, product name and unit quantity

1 9 rebounds for training platform

2 optical fiber junction boxes 1

3 LCD touch screen optical fiber test module 1

4 86 single-port distribution frame 1

5 86 dual-port panel 1

6 LC fiber distribution frame 1

7 SC fiber distribution frame 1

8 12 combined optical fiber distribution frame FC type 1

9 12 combined optical fiber wiring 1

10 48-port LC optical fiber ODF framework 1

1 1 ST flange 12

12 SC flange 12

13 LC flange 12

14 FC flange 12

15 3m ST optical fiber jumper tape 1

16 3m SC optical fiber jumper tape 1

17 3m FC optical fiber jumper tape 1

18 3m LC optical fiber jumper 1

19 horizontal wiring trough 1

20 ultra-Category 5 24-port unshielded distribution frames 1

2 1 bobbin 2

22 1 10 Tie the wires and set a 1.

23 PDU power sockets 1

24 24-port network switches 1

25 power cords 1

Insert 1 into the network.

27 Insert the power plug into 1.

28 training platform cover block 1

29 Block 6, Column Side Plate of Training Platform

30 training platform base 1

3 1 training platform table block 1

3 1 training platform slot 3

32 Desktop support feet 2

Cloud data center training platform WZ-DCFC233

Triple frame, the overall size is not less than 1750mm long *700mm wide * 1800mm high; It is connected with 220V AC system for power supply and has the function of leakage protection. Comprises an optical fiber test trainer with a liquid crystal touch screen and a 7-inch liquid crystal touch screen for displaying test results. At the same time, the attenuation value of the measured optical fiber can be displayed accurately in real time, and icon images can display the on-off state of the measured optical fiber, which supports 850nm, 980 nm, 13 10 nm *. It can fully simulate the training functions of MDA in main wiring room, IDA in middle wiring room, ODF in centralized optical wiring room and intelligent management DCIM. Support optical fiber wiring device, optical fiber connection coupling device SC/FC, optical fiber connection and optical fiber transceiver device, and can carry out basic optical fiber link training, permanent link or channel training and photoelectric link conversion training; The training system of simulated workspace includes various standard information points of single port, double port and optical fiber. The back of the training platform adopts 6* 12U pre-anchor plate, which is convenient to simulate the wiring of trunking and conduit horizontal subsystem and the wiring of information points. Can train 4-6 students at the same time; This product is based on typical tasks and key skills training, simulating typical engineering tasks, floor installation, vertical operation, stable and practical, and specially designed for teaching and training.

Product features:

1. The products can fully meet the training needs of world network wiring competition at all levels, network construction and application of secondary vocational schools nationwide, network wiring competition, computer network application in higher vocational colleges, information security assessment, computer network construction, and network wiring related skills competitions in provinces and cities at all levels.

2. The product has passed the authoritative "Fluke" link test, and it follows the international standard ISO/IEC11,the basic telecommunication standard TIA/EIA-942 of data center, and the design specification GB50174-201.

3. The equipment is wired in the cloud data center, and the actual engineering of the data center computer room is exactly the same; All training functions and testing functions are modularized, which saves the maintenance cost and teaching cost in the future. The equipment adopts open frame design, which can satisfy 3-5 students to practice at the same time and is convenient for teaching and practice.

Product configuration:

Serial number, product name and unit quantity

1 training platform cover block 1

2 Block 6, Side Plate of Training Platform Column

3 training platform base 1

4 training table seat 1

5 The training platform passes through the trunking 3

6 Desktop support feet 2

7 Training platform backboard 9

8 Plug in the 1 power supply.

9 power cords 1

10 network insert a 1.

1 1 7 inch LCD touch screen optical fiber tester 1

12 information port training module package 1

13 rack optical fiber transceiver 1

14 8-port junction box 1

15 48 ODF rack 1

16 96 optical box 1

17 12 universal optical fiber distribution frame 1

18 24-port universal optical fiber distribution frame 1

19 8-port junction box 1

20 rack-mounted 8-port PDU 1

2 1 red, yellow and black 1 square power cord (BV) m 1 (each 1 m)

22 M6 screw (hexagon, including nut) kit 1

23 M4 screwdriver 1

24 M3 screwdriver 1

Comprehensive training platform WZ-TSM-04

It is made up of multifunctional screw hole plates and is an all-steel structure simulation wall. The simulated wall is fully modular (excluding stakes), which is convenient for assembly and training (rivets are not allowed for skeleton connection). The working area of each wall is not less than 1.2M in width and not less than 2.6M in height, and each workstation can meet the training needs of four trainees. The orifice plate of each subsystem module is simple, firm and beautiful, which is convenient for module replacement, so that one machine can be used for multiple purposes. The size of each multifunctional net board is not less than 758×556mm and the thickness is not less than 1.5mm, which is modular and convenient for assembly and practical teaching. Meet the training function of each subsystem of network integrated wiring engineering, and have the training function of seven subsystems of network integrated wiring engineering wiring system engineering at the same time or alternately.

Product features:

1, the trainer is modular in design, can be combined at will, is huge and beautiful, and is suitable for various classroom installations.

2. The training device adopts all-steel structure, and various network equipment installation screw holes and through-wall wiring holes are preset to highlight the training of engineering technology principles.

3, can simulate the key technical training of each subsystem of the integrated wiring project.

4. Be able to design and practice various wiring routes with good consistency.

5. Be able to carry out installation and wiring training of various trunking or bridge in various ways.

6. Be able to carry out installation and wiring training for all kinds of conduits.

7. It can be extended to various training platforms such as intelligent management system and electrical engineering technology.

8. Each corner area has a supporting cabinet and an analog wiring subsystem.

9. Cross-connection layout, the highest classroom utilization rate, the highest equipment utilization rate, the highest cost performance, the most training methods, the best lighting and convenient management.

10, the steel wall can bear all kinds of installation equipment (cabinets, metal trunking, bridges, exhibition boards, etc. ), and make enough redundancy for the weight load of cabinets and equipment.

Technical specifications:

Technical specifications of serial number category

1 Product model WZ-TSM-04

2 Number of training groups (at the same time) 4 groups

3 Number of trainees (at the same time) 12.

The external dimension is 2.62 meters long.

The overall dimension is 2.62 meters wide.

6 Overall dimensions are 2.60m high.

24-hour and 7-hour training

8 Installation mode 10

9 Layout features Cross-connection layout, the highest classroom utilization rate, the highest equipment utilization rate, the most training methods, the highest cost performance, the best lighting and convenient management.

Training function:

1 Workspace subsystem wiring training

Truly simulate the wiring environment of the workspace subsystem in the building, and conduct the following training:

☆ Install various information boxes, modules and panels, and train threading and crimping modules.

☆ Training on installation and fixation of trunking and conduit on the wall of work area.

☆ Information module-training on making and connecting jumpers of various information equipment.

Level 2 subsystem installation and wiring training

Truly simulate the wiring environment of the walls, bridges and other parts of the horizontal subsystem in the building, and conduct the following training:

☆ Horizontal fixed installation, threading, joint connection and data cable wiring training of various trunking and conduits on the wall.

☆ Horizontal fixing, threading, joint connection and data cable routing training of various cable trunking in the bridge.

3 Management room subsystem installation and wiring training

Simulate the wiring environment of the wall, bridge, shaft and other parts of the floor management room subsystem in the building, and conduct the following training:

☆ Horizontal fixed installation, threading, joint connection and data cable wiring training of various trunking and conduits on the wall.

☆ Installation of wall-mounted information equipment and machines, installation and training of wiring racks in cabinets.

☆ Training on wiring rack embedding, cable crimping, numbering and testing in the cabinet.

4 Vertical subsystem installation and wiring training

Truly simulate the wall and shaft environment between the management rooms of each floor in the building, and conduct the following training.

☆ Training on vertical fixing, threading and joint connection of various trunking and pipes on the shaft or wall of buildings.

☆ Vertical fixation of all kinds of galvanized pipes, binding and fixing training of data lines and cables.

5. Installation and wiring training of subsystems between equipment.

Truly simulate the computer room environment of each building in the building and conduct the following training:

☆ Installation of floor-standing information cabinet equipment, various switching and routing equipment, installation and training of wiring racks in the cabinet.

☆ Training on wiring rack embedding, cable crimping, numbering and testing in the cabinet.

☆ Summarize, number, test and train all kinds of cables in the whole building.

6 Building complex subsystem installation and wiring training

7. Simulate various permanent link training and testing functions.

8. Powerful expansion function can be extended to various training platforms such as intelligent management system and electrical engineering technology.

Copper cable display cabinet WZ-DCDS- 1

2200mm high *930mm wide *350mm deep, the equipment needs to fully display copper cables, network modules, panels, distribution frames and accessories commonly used in integrated wiring engineering.

Product features:

1, combined plate structure, upper showcase and lower locker.

2. The structure of guide rail pendant exhibition board+tempered glass door.

3, tempered glass door, screw fixed, safe and firm.

4. Support all device name labels and uses, which is convenient for identification and learning. Common copper cables that are completely consistent with the comprehensive wiring project are easy to understand and learn.

Optical cable display cabinet WZ-DCDS-2

The equipment needs to fully display the common optical cables, various optical jumpers, flanges, optical modules and accessories in the integrated wiring project.

Product features:

1, upper and lower combined plate structure, upper display cabinet and lower storage cabinet.

2. The structure of guide rail pendant exhibition board+tempered glass door.

3, tempered glass door, screw fixed, safe and firm.

4. Support all device name labels and uses, which is convenient for identification and learning. Common optical cables that are completely consistent with the integrated wiring project are easy to understand and learn.

Tool display cabinet WZ-DCDS-4

The equipment shall fully display the common tools commonly used in the construction of J45 and RJ 1 1 in the integrated wiring project.

Product features:

1, upper and lower combined plate structure, upper display cabinet and lower storage cabinet.

2. The structure of guide rail pendant exhibition board+tempered glass door.

3, tempered glass door, screw fixed, safe and firm.

4. Support all device name labels and uses, which is convenient for identification and learning. Common tools that are completely consistent with the comprehensive wiring project are easy to understand and learn.

Auxiliary material display cabinet WZ-DCDS-5

Equipment needs to fully display accessories such as trunking and conduit commonly used in integrated wiring engineering.

Product features:

1, upper and lower combined plate structure, upper display cabinet and lower storage cabinet.

2. All-steel multifunctional screw hole exhibition plate+toughened glass door structure.

3, tempered glass door, screw fixed, safe and firm.

4. Support all device name labels and uses, which is convenient for identification and learning. Common auxiliary materials that are completely consistent with the comprehensive wiring project are easy to understand and learn.

WZ-520 optical fiber welding machine

Color liquid crystal display screen, simultaneously observing X-axis and Y-axis optical fiber.

The magnification of optical fiber is large, and the fiber core is clearly visible.

Various core alignment methods: core alignment, cladding alignment and manual alignment.

9 seconds welding time, 30 seconds heating time.

Rich operation interface, internalized and intelligent menu design.

15m/s can be connected to the deep concave wind hood under strong wind.

The altitude of 5000 meters ensures the welding quality in plateau area.

Usually 300 cycles.

Optical fiber hot melt toolbox WZ-TC0 1

A complete set of teaching, competition and training tools for integrated wiring. The toolbox is made of aluminum plate shell and arc profile, and there is a special fixing tool for forming lining inside, which is reliable and convenient to use. Including products: 1 dual-port optical fiber stripper, 1 Luo Pinghan, 1 Kevlar scissors, 1 optical cable loose tube stripper, 1 wire cutters (7 inches), 1 diagonal pliers (6 inches) and adjustable wrench (8 inches). 275 * 165438+ 1 precision photographer, 1 practical electrician knife, 1 3.5m tape measure, 1 black marker.

Optical Fiber Cold Junction Toolbox WZ-TC02

A complete set of teaching, competition and training tools for optical fiber cold splicing, including at least 10 optical fiber stripper, red pen, optical fiber cutter and other tools. The toolbox is made of aluminum plate shell and arc profile, and there is a special fixing tool for forming lining inside, which is reliable and convenient to use. Including products: 1 set of red light pen for optical power meter, 1 set of cutting knife, 1 bag laminated paper, 1 set of toolbox, 1 set of double-mouth miller pliers, 1 set of rubber band stripper, 1 set.

Copper cable toolbox WZ-TC03

A complete set of teaching, competition and training tools for integrated wiring. The toolbox is made of aluminum plate shell and arc profile, and there is a special fixing tool for forming lining inside, which is reliable and convenient to use. Including products: toolbox 1 set, vise 1 set, diagonal pliers 1 set, needle-nosed pliers 1 set, art knife 1 set, pipe cutter 1 set, slot shears 1 set. 1 wire stripper, 1 wire binding pliers, 1 wire binding pliers, 1 on/off tester, 1 9V battery, 1 cable stripping pliers, 1 dual-purpose network wire pressing pliers.

Herringbone ladder WZ-TL03

Product size:157 * 83 * 52.5cm; Storage size:166 * 52.5 * 5cm; Product bearing capacity:150kg; ; Product description: Soft rubber non-slip handrail, lengthened handrail, safe climbing. The soft armrest sleeve is comfortable to hold and anti-slip. Orange metal pedal connection, pedal and bracket metal plastic connection, more stable and durable. The back is reinforced with a cross bracket to improve stability. The stability is doubled by adding a reinforced crossbar in front. The soft horseshoe-shaped rubber sleeve does not hurt the floor, and there is a non-slip groove at the bottom.

Pipe storage rack WZ-PR02

Color: white; Size: 200 * 60 * 200 * 4; Product description: 75mm*35mm*0.8mm C-shaped channel steel for column, 60mm*40mm*0.8mm P-shaped steel pipe for cross beam, laminated with 0.4mm cold-rolled steel plate, each layer is medium-sized 150-200kg (plane bearing, not single-point bearing, the longer the specification, the smaller the bearing), which can be adjusted freely up and down. Butterfly holes are more convenient to install, and there are also.

Operation console WZ-OF04

Size: 1200*600*800. The tabletop is made of 50MM composite tabletop, 3MM polymer rubber and base material density board, which are glued and hot-pressed. The bearing capacity is 1000 kg, and the steel frame part is made of 1.5MM thick Baosteel high-quality cold-rolled plate, which is bent for six times. The cross beam is reserved with holes for fixing cabinets and hanging cabinets. The surface of steel frame is pretreated by electrostatic spraying of epoxy resin, and the coating has strong adhesion, corrosion resistance, smoothness and delicacy, and is not easy to fall off. In order to prevent the uneven ground, adjusting feet are added at the bottom, which is convenient to improve the uneven problem caused by uneven ground.

WZ-3DTPV 1, 3D simulation teaching platform for integrated wiring.

Main architecture diagram:

Platform overview:

Based on the actual computer network integrated wiring project, the 3D simulation training platform of Weizhong Integrated Wiring simulates or restores the real structured wiring project by using the 3D virtual reality technology and relying on the 3D virtual Unity platform to build a virtual 3D engineering scene. Students can browse all the details of structured wiring in a three-dimensional virtual environment through personalized 3D avatar, which is vivid, detailed and vivid.

At the same time, the platform is based on the concept of "business practice in internet plus enterprises", integrates the concept of "teaching and doing", simulates the 3D engineering scene with the universal and relatively standard modern building integrated wiring project as the core, and its functions cover all subsystems of the building integrated wiring system.

Product features:

1, providing a complete set of 3D virtual simulation teaching system, which can be seamlessly integrated with the integrated wiring teaching and training system;

2. Using multimedia technology to provide rich teaching resources for teachers and students to study;

3. Conduct a comprehensive 3D simulation of the integrated wiring system, focusing on the simulation of the integrated wiring training teaching scene that we can't provide an intuitive system in the training room or training base, and provide students with 3D production scene training guidance;

4. The platform provides assessment function, which realizes automatic examination and reduces the workload of teachers;

5. Typical cases are carefully designed by rich experimental teaching experts, which can cultivate learners' design and innovation ability;

6. Integrate knowledge learning with the cultivation of experimental hands-on ability to form a complete practical teaching system;

7. Virtual scenes can present project scenes that can't be reflected in real objects, which improves the safety of on-site training;

8. The game interface is friendly and intuitive, and all simulation equipment operations are close to reality, with strong sense of reality;

9. Strong expansibility, flexible addition of experimental equipment, typical experiments and examination tasks according to teaching needs, and provision of personalized customized services;

10, the integrated wiring course follows the international project standards and provides a more flexible way for simulation training than the laboratory.

Platform picture:

Software priority interface

Basic knowledge module

Basic skill module

Project practice module

Process evaluation module

Product warehouse module

Overview of platform functions:

1, the basic structure of integrated wiring

Knowledge points of integrated wiring workspace

Knowledge points of integrated wiring (horizontal) subsystem

Knowledge points of trunk (vertical) subsystem of integrated wiring