To learn mold design, we should first look at which software you need to focus on. On the basis of mastering a mold design software, we should master the ability to read drawings. In terms of professional ability, we must first master the analytical ability of mold products and carry out assembly analysis, which is what we often call a set of drawings.
Decide what mold structure to use for different products, determine the process and punching content, use design software to design products, determine the template size in the drawings for material preparation, then enter the mold drawings, and finally learn how to proofread the drawings. Commonly used softwares are UG, PROE and SOLIWORKS.
Ug is widely used in mold design, especially in plastic mold, die casting mold and other fields, as well as auto parts.
Proe is widely used in the field of electronic products and is good at product structure design. The software has powerful modeling parameters.
Soliworks is widely used in robot field, mechanical design and so on, and can do motion simulation well. In addition, many designers will cooperate with CAD to make two-dimensional drawings, so that you know which field to study.
Self-study stamping die design should first make your own die, and then learn to read the basic books of cold stamping die design. Self-study is theoretically possible;
But it takes a lot of perseverance. Generally speaking, from the theory of metal plasticity (including elasticity, plasticity, theory and material mechanics), all mathematical methods should be used (advanced). Of course, this is only for ordinary mold designer. It takes a long time to practice and accumulate experience after coming out. More advanced words, on the one hand, are the accumulation of experience, and the deepening of theory, and there is no end to learning.
Stamping die is a special equipment for processing materials (metal or nonmetal) into parts (or semi-finished products) in the process of cold stamping, which is called cold stamping die (commonly known as cold stamping die). Stamping is a kind of pressure processing method at room temperature, which uses the die installed on the press to exert pressure on the material to make it separate or deform plastically, so as to obtain the required parts.