A, the scope of production safety training:
The main person in charge, safety management personnel, special operators and other employees of the production and business operation units in this Municipality.
Second, the special operations personnel training:
1. Definition and personnel scope of special operations:
Special operations refer to operations that are prone to casualties and may cause great harm to the safety of operators themselves, others and surrounding facilities. Personnel directly engaged in special operations are called special operations personnel. The scope of the special operation certificate issued by the Provincial Administration of Work Safety in this Municipality includes:
1, electrician operation.
2. Welding and hot cutting operations. Including welders and cutters.
3, lifting machinery operation. Including crane driver, cable driver and signal conductor.
4. Motor vehicle operation in enterprises. Including forklifts, battery cars, front cranes, stackers, loaders, excavators and other drivers of various motor vehicles driving in production and operation areas and construction sites.
5. aerial work. Including erection, demolition and maintenance workers who climb more than 2 meters, and surface cleaning workers of high-rise buildings (structures)
6, refrigeration and air conditioning operation. Including refrigeration equipment installers, operators and maintenance workers.
7. Hazardous chemical operations. Operators, transport escorts and warehouse keepers containing dangerous chemicals.
Second, special operations personnel must have the basic conditions:
1, age 18 years old;
2, good health, no diseases and physical defects that hinder the operation of the corresponding type of work;
3, junior high school (including junior high school) or above, with the corresponding types of safety technology knowledge, to participate in the national safety technology theory and practical operation assessment and qualified results;
4. Other conditions that meet the operation characteristics of the corresponding type of work.
Three types of workers must pass the theoretical examination of safety technology and practical skills examination and obtain the operation certificate of special operations before taking up their posts. The training and assessment of special operations personnel should implement the system of separation of teaching and examination.
Four types of operation certificates (IC cards) are uniformly produced by the State Administration and issued by the provincial safety production supervision and management departments. The operation certificate for special operations is universal in China.
The validity period of the special operation certificate is 6 years, and it will be reviewed every 2 years. If the special operation certificate needs to be extended or re-examined, it shall go through the extension or re-examination procedures at the original issuing department or relevant departments in different places within 1 month before the expiration of the validity period.
Three, to participate in special operations personnel training (including review training), according to the following procedures:
1, prepare two 1 inch bareheaded color photos; A copy of my ID card; Physical examination health certificate; Fill in the registration form (the registration form is collected from the training institution), which is signed by the unit and stamped with the official seal, and registered at the training institution with corresponding qualifications. Submit the unexpired special operation certificate to the training institution when participating in the re-examination registration.
2. Attend the training on time according to the notice and training course arrangement.
3, after the training, by the assessment agencies to organize theoretical examination and practical operation examination, after both qualified, by the assessment agencies reported to the municipal production safety supervision and management bureau, after approval, to the provincial production safety supervision and management bureau to apply for a special operation certificate (IC card). If you fail in the exam, you are allowed to make up the exam.
Four, the city has special operations training qualification training institutions and assessment institutions are:
1. Training institutions:
1, Training Center of Xiamen Safety Production Management Association. (with three-level safety production training qualification)
Tel: 2036600; 5802725
Subordinate training point
(1) Huli Training Point: Tel: 8436399
(2) Tongan Training Point: Tel: 7892222
2. Xiamen Employment Training Center. (with three-level safety production training qualification)
Tel: 50595 13
3. Xiamen No.2 Technical School (training electricians, welding, lifting (construction), refrigeration, climbing and erection)
Tel: 7360430
4. Xiamen Vocational and Technical College (training electrician, welding, lifting (building), refrigeration, climbing and erection)
Tel: 29 1 155 1.
5. Anbei Training Center in jimei district, Xiamen (training electricians, welding, lifting (construction), refrigeration, climbing erection and motor vehicles in the factory).
Tel: 62 15220
2. Assessment agency:
Xiamen safety production management association safety production evaluation center
Address: 5th Floor, Labor Building, Changqing Road 19 1
Tel: 5047808