Registration: 0592-5809928, 399 18 15 [online registration/consultation]

E-mail: 5809928 [@] 163.com

Address: ① 5th floor, Huicheng Commercial Center, Xiahe Road, Xiamen; ② Block D, Floor 0/4, Chang 'an Building, No.75, Lvling Road, Jiangtou.

MasterCAM numerical control programming courseware

□ Training objectives

After five weeks of course training, students can basically use MasterCAM software to complete three-dimensional composition, numerical control programming and actual machining operations of parts with moderate complexity without the guidance of teachers.

□ Training content

The first week:

(Mastercam overview

Interface introduction, main menu, auxiliary menu, toolbar, shortcut key, etc.

(2) the structure of points, lines, arcs and circles

The construction of 1. point: including position point, bisector, grid, etc. , the focus is on the location point.

2. Line composition: including horizontal lines, vertical lines, dotted lines at both ends, broken lines, polar tangents, normals,

The emphasis is on parallel lines: horizontal and vertical lines.

3. The construction of arc and circle: polar coordinate arc, two-point arc, three-point arc, tangent and two-point arc.

Circle, center radius circle, center diameter circle and center boundary circle.

4. Interpolation: ① Various functions of pruning ② Transformation of various functions.

5. Exercise: 5 (designated exercise: LX00 1, LX002, LX003, LX004, LX005)

6. Practice explanation (insert before and after class)

(3) the construction of partial surfaces and solids

1. Some surfaces: ruled surface and traction surface. Interspersed narration ① Surface trimming: including trimming to curves.

Lines, surfaces, etc. ② Key points such as surface rounding: surface trimming.

2. Structure: stretching entity, rotating entity, scanning entity, rounded entity and other key points: basic entity,

Extruded solid

3. Introduction: ① Screen function ② Coloring function ③ Analysis function ④ Document function, etc.

4. Exercise: 5 questions (typesetting exercises: LX006, LX007, LX008, LX009, KSW003)

The second week:

(a) Focus of the remaining surfaces (lifting, kunshi, etc.). ): Kunshi noodles.

(2) Entity part: Boolean operation, basic entity, entity transformation and other key points: entity transformation.

(3) Exercise: 3 basic exercises (hat, bottle and spoon modeling) and 2 comprehensive exercises (providing models).

Attached drawings).

The third week:

(1) 2D processing

Shape milling, general trenching, drilling and setting of various parameters, interspersed with cutting tools,

Selection of parameters such as rotational speed and feed rate.

(2) 3D surface machining

1, rough machining: including parallel, radial, projection, curve streamline and outline form,

Grooved and down-inserted knife key points: parallel and grooved.

Interpolation Description: Check the setting of the surface (interference surface)

2. Machining: including parallel type, parallel steep slope type, radial type, projection type, curved surface streamline type and contour type.

Shape, shallow plane type, intersection angle clearance type, debris clearance type, and peripheral equidistant type.

3. Tool path addition: full circle, point tool path milling, projection surface, translation, rotation, mirror image, etc.

4, program modification, transmission, simulation, simulation, etc.

5, the program list

6. Exercise: 2 questions (mouse, crystal eyes programming)

Week 4-5: Practical operation of machining center.

1, machine tool operation safety knowledge

1), machine tool operation method and safety precautions

2), practice operating the machine tool

2, CNC milling machine structure knowledge

1), introduces the structure and working principle of CNC machine tools.

2), practice operating the machine tool, understand the machine tool structure.

3, basic knowledge of numerical control system (8 hours)

1), understand the basic working principle of numerical control system.

2), practice operating machine tools, understand the numerical control system.

4. Basic knowledge of NC machining

1), understand the NC machining method, and explain the operation and corresponding functions of the machine tool panel.

2) Operate the machine panel to understand various functions.

5. Describe the actual operation examples: including calibration, collision, tool handling and conveying procedures (20 hours).

6. Exercise: Processing mouse and crystal eye board.

The characteristics of our school:

◆ Xiamen CITIC Computer Training Center was established in 1993, located in the bustling area of Xiamen, with convenient transportation; The teaching policy of the center is the concept of paying equal attention to application and practice;

◆ The purpose is to train senior office clerks, interior design, advertising design, landscape design talents, web design, mold design, film and television animation, computer draftsman and other professional IT elites.

◆ The center is well-equipped and has a strong faculty. We specially invite industry designers, engineers and technicians and teachers from professional colleges to give lectures. Our school has been running for 14 years and has accumulated rich experience in running schools.

It is an official examination and training center authorized by Adobe.

National Computer Grade Training and Examination Center;

OSTA national computer high-tech examination certification;

Autodesk official examination certification;

Discreet company -3Dmax engineer examination certification;

National registered interior designer qualification examination certification, etc.

The school promises:

1, small class teaching (one class is controlled at about 10, one person has a computer, and the computer room is open all day, free of charge (9: 00 ~ 2 1: 30).

2. Professional teachers (more than 65,438+00 full-time IT teachers with many years of teaching and working experience to ensure the quality of each student)

3. Re-learn for free (if you can't learn, you can re-learn for free)

4. Beautiful environment (nearly 100 sets of four machines in full operation, equipped with air conditioners, water dispensers and other common equipment)

5. Recommend internships and employment for free.

6. Students sign up for research, and the school guarantees one-time pass (those who fail will be paid by the school to make up the exam until they pass).

7. Full-time teachers teach, and students with poor foundation are given separate tutoring for free.

8. Arrange accommodation for international students.

Open shifts:

The classes in our school are divided into full-time classes and amateur classes.

Day shift (9: 00 ~12: 0014: 00 ~17: 30)

Night shift (18:30~ 10:00)

Weekend shift (9: 00 ~12: 0014: 00 ~17: 30)

Registration instructions:

You need to bring two one-inch black-and-white or color photos and a copy of your ID card when you register.