1, the height of the bottom die is generally adjusted for individual bottle bottom eccentricity, and the overall eccentricity can reduce the pressure to reduce the output power of the central heating pipe, or observe after turning off the lights.

2. Check whether the pre-blowing solenoid valve is blown by individual molds, the bottle embryo is caused by impurities, or there is no pre-blowing in single mode.

3. Check whether the pre-blowing pressure and bottle blowing pressure are normal by necking.

Bottle blowing machine is a machine that blows the finished bottle embryo into bottles through certain technical means.

The biggest feature of PET bottle blowing machine is to separate the drying tunnel from the bottle blowing, which speeds up the bottle blowing and improves the output.

PET multifunctional plastic bottle blowing machine is divided into two control systems (customers can choose freely). One is to control the technical parameters more accurately (according to the requirements of different customers at home and abroad, the above control systems include Omron and Mitsubishi, etc. ). The machine is simple and safe to operate, controlled by double emergency stops at different positions, as well as single-point enlightenment buttons and double-point start buttons at different positions, which is convenient for operators to work. This machine needs only one person to operate. Without special training, the machine has a special high and low pressure gas storage device, and users can supply gas with single gas source or double gas source. The mode locking device adopts double crank mode locking, which has the advantage of large mode locking force. The installation of the machine is very simple, and the operation and maintenance of the operators are also easy.