Electrician's work permit is commonly known as electrician's work permit. The Measures for the Administration of Electricians in network access license (OrderNo. of State Electricity Regulatory Commission 15) came into effect on March 1 2006, stipulating that electricians on the network refer to the personnel engaged in electrical installation, testing, maintenance and operation on the user's power receiving device or transmission device. Electrician's work permit is an effective certificate of electrician's qualification to enter the network. Electricians working in the network shall obtain the license and register in accordance with the provisions of these measures. Personnel who have not obtained the electrician's work license or whose work license has not been registered shall not enter the network for operation.
Electrician's network operation (electrician's work license) license is divided into three categories: low voltage, high voltage and special.
Network access license, a low-voltage electrician, can be engaged in low-voltage operations such as electrical installation, maintenance and operation with a voltage level below 0.4 kV.
Those who have obtained the Certificate of High-voltage Electrician's Network Access can engage in electrical installation, maintenance and operation of all voltage levels.
Network access license, a special electrician, can be engaged in special operations such as electrical test, secondary installation and debugging, and cable operation. On a power receiving device or a power transmitting device.
The electrician's work permit (electrician's work permit) shall be registered with the licensing authority. Registration is divided into initial registration and renewal registration. Registration is valid for 3 years.
1, electrician special operation certificate, also known as electrician operation certificate, or electrician IC card, issued by the provincial safety production supervision and management bureaus;
2, the certificate on the website of the provincial safety supervision bureau, once every two years, once every six years, not annual inspection expired, cross-regional annual inspection. That is, there is no need for annual inspection in the issuing unit, and the certificate number is T+ ID number.
3. The certificate is national and valid for life. Must participate in the annual inspection, otherwise it will be invalid;
4. The special operation certificate should be tested once a month.
5. Appraisal scope: electrician operation, welder, forklift driver, refrigeration operation, lifting operation, etc.
5. Information required for accreditation: 65,438 ID cards +0 1 inch color photos, and 4 with the highest education. Education needs to be above high school.
6. Like the second-generation new ID card, the certificate contains a magnetic card;
Legal basis:
Law of People's Republic of China (PRC) on Work Safety
Article 94 Special operators of production and business operation entities who fail to receive special safety operation training and obtain corresponding qualifications according to regulations shall be ordered to make corrections within a time limit and may be fined up to 50,000 yuan. If it fails to make corrections within the time limit, it shall be ordered to suspend business for rectification, and a fine of not less than 50,000 yuan but not more than 100,000 yuan shall be imposed, and a fine of not less than 10,000 yuan but not more than 20,000 yuan shall be imposed on the directly responsible person in charge and other directly responsible personnel.
Enterprises and institutions that engage in special operations by using personnel without special operation certificates, causing heavy casualties or other serious consequences, if the circumstances are especially bad, shall be sentenced to fixed-term imprisonment of not more than three years or criminal detention, according to Article 114 of the Criminal Law of People's Republic of China (PRC).