Computer training report 2000 words (a) to participate in computer training, although time is tight and there are many learning tasks, it is really from actual training, so it is easier to understand and comprehend. Through practical training, I have mastered the basic knowledge and ability of computer. Through this study, I learned about Chinese WindowsXP and Office XP, and learned the operation of Windows XP, Word, Excel and presentation Power Poind, as well as the production of web pages, the use of e-mail, and the arrangement and release of information resources. Although the training time is very short, it really benefited me a lot. This training has built a platform for us to learn from each other and communicate with each other, so that we can constantly improve and grow in mutual exchanges and cooperation. And can skillfully use this knowledge in the future and constantly improve their level.
The teacher introduced several commonly used softwares, such as office software, and explained the application skills in detail, and analyzed, pointed out and explained the problems that often appeared in the actual application process. I believe that through this study, I will be able to use these software in my future work. Although the training time is short, every teacher is patient and always explains all the questions we ask over and over again, which makes me very moved. I have gained a lot from studying and communicating with my peers.
In order to apply what I have learned to life, I will often organize learning interest groups with my classmates at the same level and major, and we will exchange and discuss learning problems, experiences and experiences together. And good students will lead everyone to learn, which can improve learning efficiency. Talking to you when you encounter problems can help you better master the knowledge points, and for students who help answer questions, they can also deepen their understanding of the knowledge points. In addition, we should make full use of the online answering time, make preparations before answering the questions, and make a summary of the questions in the study in advance so that the answers can be targeted.
Training makes me better understand the installation and maintenance of computer hardware and system software. When studying this part, Mr. Jing explained it in simple terms, so that we can actively operate ourselves and improve our operating ability in combination with practice, so that every student can get a chance to exercise. What impressed me the most was the teacher's words: "Learn more about computers, and you are not afraid of making mistakes!"
Secondly, I learned several application skills of software, and also learned some methods to solve common problems in practical application (such as downloading audio and picture materials). Through this study, I will be able to skillfully use computers in my future work. In order to improve everyone's understanding, the teacher not only used physical demonstration, but also provided us with practical opportunities to explain relevant knowledge, and introduced some methods that were rarely used at ordinary times, which was helpful for our own operation in the future.
Through this training, I understand that I should know more about relevant knowledge, read more books, think more, ask more questions, ask more why, and apply what I have learned. Computer network greatly reduces the resource consumption of study, life and work. We are a new generation who use high technology. With the rapid development of our society, we need teachers to master certain computer knowledge in order to help us better. But sometimes we have to use our brains, experience and practice in person, remember and master the position, function and usage of various commands. Improve our overall knowledge and lay a good foundation. At the same time, I learned a lot of computer knowledge, and more importantly, I improved my communication with others. We sit together and talk freely, discuss and communicate with each other, and ask the teacher to help us solve what we don't understand, so that we can learn from each other, consolidate our knowledge and improve our learning efficiency. At the same time, I hope to hold more such training in the future, because computer knowledge is updated very quickly, and only by continuous learning can we master the latest knowledge.
I believe that we will learn more and more in more learning opportunities. No matter now or in the future, everyone should constantly strengthen their study and constantly "recharge" themselves, so as to keep forging ahead, be brave in innovation and not be eliminated by society. After studying computer for a few days, I feel the joy of learning and growing up. This is learning and happiness!
The 2000-word computer training report (2) is less than a week, which is the time for computer network training in our class, although the time is not very long.
Only four short days, but let each of our classmates have the experience, let me benefit a lot. Through this network technology training, my practical ability has been improved to a certain extent, and the combination of theory and practice has given me a deeper understanding of network engineering knowledge in books or outside books. Training process:
The whole morning, the training content is to make twisted pair. The teacher divided us into three groups and operated separately. Each group distributed materials for making twisted pair, RJ-45 crystal head, twisted pair, twisted pair clamp and a tester for testing whether the twisted pair connection is correct. After the teacher explained it again, we began to operate. To make twisted pair, one twisted pair should be taken step by step. First, cut the end of the twisted pair with the wire cutting edge of the caliper, then extend the end of the twisted pair into the wire stripping edge, so that the end of the twisted pair touches the front stop, and then hold the wire clamp appropriately. At the same time, slowly rotate the twisted pair, let the edge cut the protective sheath of the twisted pair, and take out the end to remove the protective glue. As you can see, twisted pair is made up of eight colored wires twisted in pairs. Parallel arrangement, in order, first in the order of orange, blue, green and brown, and then open in pairs. The sequence of T568B is white orange, orange, white green, blue, white blue, green, white brown and brown. The sequence of T568A is white green, green, white orange, blue, white blue, orange, white brown and brown. We made T568B. When making a straight line, both ends should be the same. When making a reticle, one end is T568B and the other end is T568A. In the production process, some problems appeared. Those wires are very thin. If you are not careful, you will break them. You should tidy up the wires when you tidy them up. When cutting wires, they should not be too long or too short. Pay attention to the position when inserting the wire, pay attention to inserting it in place, then press the wire and check it. Use a twisted pair tester to test connectivity, that is, direct wire connection. Then, according to the principle of 1-3, 2-6, 3- 1, 4-4, 5-5, 6-2, 7-7, 8-8, you can clearly know where you are wrong and solve the problem.
The content of the afternoon training is to set up a peer-to-peer network. In terms of materials, twisted pair, switch and network card are needed.
Procedure: Connect the twisted pair to the computer and switch. First, install the network card in the PCI slot of the computer. Install the network card driver, then configure the IP address, and set up * * * to enjoy files and folders, and you can access them on other hosts. The problem is that some steps are not clearly recorded in the setting, so that it is impossible to continue in the setting process, and the setting is wrong. Through learning, we know the function of peer-to-peer network, and master the methods of establishing peer-to-peer network and setting up * * * sharing in peer-to-peer network.
12.08 in the morning, training content: installing network operating system. After the teacher showed us, we began to operate. First, run the virtual machine installer on the computer to install the virtual machine. Then, run the virtual machine. The next step is to install Windows2000Server on the virtual machine. Through training, I learned about the use of virtual machines and the installation of Windows2000Server. In the process of training, the mistake is that in the process of installing the virtual machine, the steps are not clear, which leads to too much time for installation. Afternoon 12.08, training content: surfing the Internet. The materials needed are ADSLModem and router. And telephone lines. Before the operation, the teacher introduced us to the functions and usage of Modern and router. First, connect two computers to an ordinary LAN. One computer has WindowsServer installed as the server, and the other computer has WindowsXP installed. Then, install ADSLModem and router to connect all related equipment. Then, set up a high router, use DNS to set up two computer gateways in the LAN, etc. Finally, test the connection. There will be some minor problems when setting up routers and gateways, but they can all be solved.
12.09 am, training content, website construction and configuration. Install DNS, ActiveDirectry and DHCP. Set domain name, set IP address, install IIS, open manager, set website, set home directory, set documents, test and verify. I didn't remember many steps when I did it, and the home directory settings were also wrong. Under the guidance of the teacher, we can all solve it. Through study, we have mastered the composition and design methods of Internet websites, and also know the configuration methods of Web servers.
12.09 afternoon, training content: network engineering application design. We complete the construction planning of a network system in groups, including the demand analysis of the project, the production of the network topology diagram and the writing of the network construction scheme.
12. 10 am, training content: network security management. In the process of operation, firstly, establish organizational units, create, copy and move users and groups, create disk partitions, use backup wizard to back up and restore data, and manually back up and restore data. After the operation, we have mastered the management and operation of network users, the management of network disk, and the operation of data backup and recovery. It should be noted that the emergency repair disk cannot be used to start the computer, and it is mainly used to repair the system when the system fails.
Afternoon 12. 10, training content: setting up wireless network. The required equipment includes two PCI wireless network cards, a PCII00Mbps twisted-pair network card, a wireless access AP, a switch and two RJ-45 twisted-pair wires. First, install the network card and connect to the network. Then, install the network card driver and set the network communication protocol. Finally, test whether the network connection is normal. From this, we can understand the installation technology of wireless LAN and test the main performance of wireless communication equipment.
Really learned what is not in the computer textbook, or what is really used in the textbook. In this way, I not only consolidated my old knowledge, but also mastered new knowledge. , not only improved their hands-on ability, but also realized the spirit of team cooperation. A deeper understanding of the practical application of computer network technology.
Computer training report 2000 words (3) I. Training purpose
1. Carry out the teaching principle of strong practice and integrating theory with practice, increase the depth and breadth of students' professional perceptual knowledge, and lay a good foundation for subsequent courses by using the knowledge and skills they have learned.
2. Through practice, broaden students' horizons and knowledge, and gain perceptual knowledge of computer hardware installation and system maintenance. At the same time, arrange appropriate lectures or lectures to promote the combination of theory and practice and cultivate students' good style of study.
3. Carry out professional thought and professional ethics education in practice, so that students can understand and love their majors, stimulate their enthusiasm for learning, improve their professional adaptability, and initially have professional ethics.
4, through the understanding of the major, industry and society, understand the future jobs and employment forms, so that students can establish their own learning direction, try to explore the combination of learning and employment, and give play to their subjective initiative in learning.
Second, the training content
The main contents of the internship include computer hardware assembly, fault detection, bios system setup, simple hardware troubleshooting, understanding of hardware working principle, system installation and backup, system recovery, software installation and debugging, system maintenance, etc. , and write a training report. Professional teachers Chen Lili and Liang Jinhong are responsible for this training. This training mainly arranges the following tasks:
1, the understanding of the working principle of computer hardware and the understanding of the mutual cooperation between hardware.
2, computer hardware assembly, fault detection and elimination.
3.bios system settings
4, hard disk partition and formatting
5. Installation, backup and recovery of the system
6, common software installation and debugging, system maintenance.
7. Write a training report.
Section 1: Computer Assembly and Maintenance
1. 1 Basic components of computer system and main functions of each component.
1. 1. 1 basic components of a computer system
A complete computer system consists of computer hardware system and computer software system. Hardware is the entity of computer, also known as hardware equipment, which is the floorboard of all fixed equipment. It is the material basis for a computer to realize its functions. Its basic configuration can be divided into: host, keyboard, monitor, CD-ROM drive, hard disk, floppy disk drive, printer, mouse, etc. Software is an assembly that directs the computer to run, and it is divided into system software and application software according to its function. As shown in figure 1.2. 1.
1. 1.2 Basic concepts of stored program control
The concept of "stored program control" was put forward by American Hungarian mathematician von Neumann, as shown in figure 1.2.2. Some basic ideas of designing electronic digital computers put forward in 1946 can be summarized as follows:
1. It consists of arithmetic unit, controller, memory, input device and output device.
Components make up a computer, and the basic functions of these five parts are specified.
2. Data and instructions are expressed in binary form.
3. Put the program and data in memory in advance, and let the computer work automatically.
Take instructions out of memory at high speed and execute them. This is that concept of store programs.
These concepts laid the basic structure of modern computers and initiated the era of programming. For more than half a century, although the computer structure has undergone great changes and its performance has been surprisingly improved, as far as its structural principle is concerned, the von Neumann computer based on the stored program principle is still the mainstream.
Through this internship, under the patient guidance of the teacher and my unremitting efforts, I have mastered and understood the basic composition of pc and the structure and function of each component. Moreover, I can assemble the pc, understand the matters needing attention in the installation process, and accumulate some installation experience. This internship has made me gain a lot, and I have learned some truth from it: "Before we decide to do something, we must know something, be prepared and operate according to the predetermined plan, so that we can get twice the result with half the effort." But the progress of things is not necessarily smooth sailing. Some problems will inevitably be encountered in the assembly process. But the key is not to panic when encountering problems, but to deal with them calmly. After discovering the problem, first analyze the cause of the problem, then study the problem, and finally find a solution to the problem. "
2 1 century is the information age, and information and computers are inevitably related, but people pay more attention to computer software and network technology, which are considered as the main ones. Technically, they are better than hardware such as computer assembly. But I think it is very important to assemble and maintain this course, because it is the foundation of the whole computer and a part of the whole system. Without a foundation, nothing else can be discussed.
Learning the course "Assembly and Maintenance" is very touching. I used to think that computer knowledge was deep and difficult, but now it is no longer a problem to assemble a computer! In the study of this course, I understood the teacher's sentence, "Learning is for use, learning is just for use." The combination of learning and application is easy to accept, understand and generate interest in learning.
I know my computer knowledge is far from enough. As a secondary vocational and technical school student, we must establish a correct outlook on learning, life and the world. "Modesty makes people progress, and pride makes people fall behind." If you want to make progress, you must learn with an open mind and dare to learn. For questions you don't understand, you should consult experienced or knowledgeable people, or look up information through the Internet and other channels to solve them yourself. Don't pretend not to know, because this is a taboo in learning and a stumbling block to people's progress.
Modern society is a society of knowledge and information, and the development of computer technology is changing with each passing day. In just over 20 years, the microcomputer has developed to p4/2.4ghz, and its performance is not the same as that of the original ibm-pc. Looking forward to the future, computers will be the product of the combination of semiconductor technology, superconducting technology, optical technology, nanotechnology and bionic technology. From the development point of view, it will develop towards giant and miniaturization; From the application point of view, it will be systematic, networked and intelligent.
2 1 century, microcomputers will become smaller, faster and more humanized, and will play a greater role in people's work, study and life. Supercomputers will become strategic materials and powerful tools for developing high technology for all countries to reflect their comprehensive national strength and military strength.
Technology is developing and society is progressing. Technology needs innovation. Without innovation, it will be eliminated by society and will step off the historical stage. As a socialist youth in the 2 1 century, if they want to keep pace with the times, they must constantly absorb new knowledge like sponges, arm themselves with knowledge, study hard and improve their comprehensive quality. Do more, use more brains, and take the road of integrating theory with practice. At the same time, we should establish lofty aspirations, recognize the social development situation, strive to cultivate the spirit of innovation and carry forward the spirit of hard struggle, and strive for socialist modernization!
Computer training report 2000 words (4) After a short week of computer training, I deeply realized the magic and mystery of computers; I also realize that I still have many shortcomings on the computer.
The teacher assigned some homework for us to practice. Under the careful guidance of the teacher, I have operated Excel, word, outlook and powerpoint very well! At this moment, we have entered the university. After half a year's study in school, we have only a preliminary understanding and understanding of computers. But this semester, we have been busy studying theoretical knowledge, and we have never had the opportunity to put down our textbooks and really feel the charm of computers. So before the training, the computer was more abstract to us, but through this training, we unveiled her mysterious veil, which is no longer far away from us! As far as I know, most students have been exposed to computers and played some games before, but they don't know how to operate some useful systems for our future work. There is little infiltration into the computer knowledge we have learned, which was mainly operated by teachers in the past. This training is different. The students are well prepared. During the activity, the students came to the classroom in advance, and each student practiced carefully. Listening to the "click" typing sound, I am really happy! Yao Yuan and Teng Xiaohuan also attended the training with us. They also gave us guidance and detailed explanations during the training. This training activity was very successful. In addition to the students' full preparation, I would also like to thank the leaders and professional teachers of the college and food department. Without their efforts, they gave the students a platform for hands-on practice.
Through this training, we have a deeper understanding of computers. To be a modern man in the 2 1 century, we should not only have excellent theoretical knowledge, good psychological quality and healthy body, but also have super computer operation potential. As the saying goes, "a scholar doesn't go out to know what's going on in the world." For a food major, he needs a wider circle of friends and a wider range of knowledge, so he should focus on computers! So I understand that the knowledge in books only provides methods, and in practice, we must explore methods suitable for specific work, which require our constant study and diligent exploration.
However, on my first night of training, I found myself wrong. This computer training is very different from the previous training. The previous training was for exams, which was not practical, and what I learned at that time was not used much at work, so I forgot it after a long time. The most striking feature of the training materials is that they are practical and instrumental, and they are often used in daily work. In the first training class, I listened carefully and compared the learning materials with those that were not standardized and unskilled before. I feel that the learning effect is very good and I have benefited a lot. Personality is the knowledge of EXCEL, because I usually use it less and don't know much. I don't want to pursue further studies, so I'm not familiar with the operation of EXCEL. This just helped me solve this problem. Through this training, I have a new understanding of EXCIL's operation and mastered several methods. There is also the production of slides, which has never been made before, and it is not as difficult as expected to pass this study. I have basically mastered the simple production. At this time, we should think of this kind of training. As the saying goes, "Sharpening the knife does not mistake the woodcutter."
It is precisely because of the gains in my study that my thoughts will be suddenly enlightened. To tell the truth, in recent years, I feel that I am no longer young. What else can I learn to muddle along? Although I still try to do my job well, my attitude towards learning is to deal with it if I can, and to steal some laziness if I don't want to deal with it. Because of this idea, the motivation in learning is insufficient. Through this training, I feel that if you want to change this wrong concept and do a good job, you must keep learning to charge. Only by constantly learning to charge can you improve your work potential. The ancients said that "it is never too old to learn", which makes sense.
Computer training has come to an end, and in my spare time, I began to think quietly. Out of trust in the school, I started working in the school from the middle of last semester. Although I go all out, work hard and do a lot of work, I know that I am far from being "excellent" and far from what the school expects of me. Although there are potential, level, experience, personality and other reasons, but the most important reason is that the ideological neglect of learning, resulting in some work can not be completed well. Due to the particularity of office work, staff are required to be rigorous and flexible in thinking, be able to quickly understand the intention of leaders, calmly deal with complex situations, and not always be in a hurry and forget things when completing their work. Through this training, I realized that only by settling down, calming down, studying hard, doing things in a down-to-earth manner, paying more attention and using more brains can we do our work better. Contribute my meager strength to the cause of education
During this time, I also saw many problems of my own, and encountered such and such problems. Without a certain depth and breadth of learning, it is difficult to cope with it in practical work. Therefore, it reflects insufficient study, shortcomings and omissions, and poor hands-on ability. We need to study and practice again, expand our knowledge reserves, enhance our practical skills, and reserve more abilities for future work. The internship has brought me a lot of gains. After this internship, the theory I have learned has been applied in practical work, gained valuable work experience, mastered more professional knowledge in a limited time, and made me have more chips in my future work. This experience made me enter the quasi-workplace state in advance, experienced the life after work in advance, and transformed from a student to a workplace person in advance. Broaden your horizons, make clear your direction, learn skills, and pave the way for your future professional life.
Generally speaking, this training is very helpful to me, which has benefited me a lot and improved my knowledge in this field. Besides, I also learned how to better communicate with others, how to accept others' better views, how to better state my own views and let others agree with me.
The social competition is fierce, so I think we should seize the time of studying in college, enrich ourselves, develop in an all-round way, break through the computer and try to be an excellent modern person!
Computer training report 2000 words (5) X month X day is the time for computer network training in our class. Although the time is not very long, only a short two weeks, but let every student have an experience, let me benefit a lot. Through this network technology training, my practical ability has been improved to a certain extent, and the combination of theory and practice has enabled me to have an understanding of computers in books or outside books.
The content of this training: the use of word processing software wordXX: such as document typesetting, table making, insertion and formatting of me, pictures and artistic words, etc. Mastering various skills of using word software can not only improve the method and speed, but also improve the processing of word documents. You can use it more skillfully in the future, and you can use all the methods in this chapter to modify the word document comprehensively and skillfully.
The use of excelXX, a spreadsheet software: master the concepts of workbook, worksheet and cell, and master how to create and save a workbook; The formatting of worksheets, the creation of charts, data management operations such as data sorting, screening, classification and summary, the use of common functions, the setting of cell formats, etc. After completing the exercises of excel, I have deepened my understanding of excel, become more proficient in operation, and found my own shortcomings, which will help me concentrate on overcoming my own shortcomings in future exercises.
Use of ppt: We can make presentations, skillfully design the layout of slides, and skillfully add text, pictures, sounds, video clips and other objects to slides. The production of presentation, the slide itself and the setting of slide show method are all the contents of our training. Understand the computer office application Office.
Describe the work content with pictures and words, show yourself with a simple name list and highlight yourself. In the past few days, I have been constantly improving my work. Under the guidance of Mr. Pang, I also found my own shortcomings and corrected them. After practicing word this time, I realized that the computer system can bring us a lot of convenience and save a lot of time and work. Therefore, I will study computer courses hard to lay a solid foundation for a better computer network in the future.
I still lack some skills and methods in the operation of excel and word, and my proficiency in operation needs to be improved, so I will practice hard in my future life and study to improve my knowledge system and skill system.
During the training period, observe the rules and discipline, attend classes on time, be late for school, do not leave early, actively cooperate with the teacher, and successfully complete the homework assigned by the teacher on time.
This training also made me deeply understand: "A journey of a thousand miles begins with a single step", which is a short and substantial training. I think it has given me a better understanding of word and office software, which has played a bridge role and a transitional role in the future. It is an important training since the beginning of the university, and it is also an important step, which is also of great help to the future work. In the process of training, I encountered some problems in the office software department, but after discussing with my classmates and consulting with my teacher, I learned a lot and learned a lot.
Application ability of animation software. The teacher is very serious and responsible. As long as we ask him questions, he will carefully guide and answer our questions in detail, so that we can learn more knowledge in practice. This training has also cultivated students' patient learning style, enhanced students' sense of cooperation, and improved everyone's application analysis ability, which is conducive to our ability to play in our work after graduation.
In the process of training, students ask questions if they don't understand, and students ask and answer each other. Strong learning atmosphere. If we can bring this learning atmosphere to the future study, I believe our class will become more excellent. In a blink of an eye, the training is over. In the process of training in this office, I think about how I came step by step, and I really can't tell what it feels like. During these two weeks of training, I was accompanied by fatigue and tension, just like racing against time, trying to finish the task efficiently in a short time. "How can you stop without me?" Perhaps it is the best way to describe my mood at that time. Two weeks, just two weeks, I learned a lot and learned more about learning, which really benefited me a lot.
Through this training, I learned how to typeset a paper, mastered the basic operation of word2003, and learned how to make spreadsheets and score columns with excel. These will be of great help to me in writing papers and learning computers in the future. I also found many strange places and problems, and tried to find the answers by myself, from which I gained a lot of happiness, improved my ability to solve problems and greatly improved my understanding of computers.
I think the most important gain is that I fell in love with the computer, and let me know that it pays off. As long as you have enough patience and hard work, anything can be successful. If you can't always count on others, you need to do it yourself. Details determine everything, and a small problem may lead to failure. In short, the harvest is great!
Although I have learned a lot from this computer training, I also feel that there are still many areas worthy of improvement in computers. For example, I knew little about computers before, but I didn't understand many basic operations in this training, which wasted a lot of time and energy. I reviewed everything left over from the past, and it was very laborious to do it. and me
I feel so impatient and irritable that I have made many mistakes that I shouldn't be upset. I have forgotten a lot of what I have learned, and I am not very familiar with it.
Through this training, I gained a lot, learned a lot of computer skills, especially improved office skills, from which I learned a lot, from the knowledge in books to practical operation, and gained a lot. In the process of training, I really learned the knowledge that is not in the computer textbook or is really used in the textbook, thus consolidating the old knowledge and mastering the new knowledge. , not only improve their hands-on ability, but also realize the importance of cultivating innovative consciousness. A deeper understanding of the practical application of computer network technology. This has laid a good foundation for our future practice.