1. Materials must be genuine, not shoddy, and be constructed in strict accordance with the budget and drawings. 2. All newly-made brick walls and wooden ornaments made on bathroom walls, such as wardrobes and carved walls, must be painted with moisture-proof paint twice on the surfaces of brick walls and plywood respectively before the next procedure can be carried out.
3. Make wooden ornaments on the original wall, such as door covers, window covers and footstones. , you must stick a layer of moisture-proof paper. 4. When the solid wood lines and decorative boards are in the same line of sight, the colors must be harmonious and the textures should be opposite. 5. Solid wood door cover line, window cover line, mouth line, convergent edge line and facing convergent must be tight, firm and flat.
6. Furniture doors, inner openings of wardrobes, drawer walls and dark edges of doors must be closed with solid wood flat lines (except for panels without lining).
7. There are strict operating standards for furniture, wooden doors, footstones, ceilings and floors.
Furniture: 18cm joinery board for furniture frame, 5cm joinery board for back panel, 12cm joinery board for drawer wall and 5cm joinery board for drawer bottom panel.
Wooden door: Chinese fir stripe, double-sided 9cm wooden board, double-sided decorative board, thickness not less than 4 cm. Footline: Use 15 cm wood board, decorative board and solid wood thread as footline.
Ceiling: gypsum board ceiling is based on wooden keel and fixed with high-quality (Jinyipai) screws. Floor: Ridges must be washed on site, with a spacing of 24.4 cm (unless there is no plywood bottom). For the actual floor laying, it must be fixed on the pine keel with floor nails. 8. The aluminum gusset ceiling in the kitchen and bathroom must be made of wooden boxes.
9. There shall be no less than 3 screws in the drawer trunking, and there shall be one screw in each hole of hardware such as joints and hinges.
10. Glue can't be used less, let alone used to stick panels and nail solid wood lines.
1 1. The surface of partition wall or ceiling must be covered with paper gypsum. When encountering walls, columns and beams, it is best to use outsourcing. Gypsum board partition must be lined with two layers of sound insulation cotton.