One: Buy wooden furniture.

Wood furniture is divided into all solid wood furniture, solid wood furniture and wood-based panel furniture. Pay attention to the following five aspects when buying:

1/. Surface quality. When buying furniture, look for scratches, indentations, blisters, degumming and peeling, glue marks and other defects on the surface of furniture materials. Pay attention to whether the wood grain pattern is natural and smooth.

2/. Production quality. Whether the edge contour of wooden furniture is smooth and the angle is very accurate; For the decorative parts on the edge and surface, see whether the decorative parts are glued evenly, whether the bonding is firm and whether the trimming is flat; Whether the end faces of visible parts such as side panels, door panels and drawer panels are edge-sealed; The assembled parts depend on whether the tongue-and-groove at the drilling hole is exquisite and neat, and whether the joint is firm after installation; Whether the gap between the door and the drawer is too large is generally required to be between 1.5mm-2.0mm, and whether the push and pull of the door and drawer are flexible.

3/. Quality of metal parts and plastic parts. The quality of metal parts also determines the internal quality of wooden furniture. Metal parts should be smart and smooth, with good surface plating, and no rust, burr, etc. , and the precision of accessories should be high. Plastic parts should be beautiful in appearance and bright in color, and the parts to be used should be strong and elastic, not too thin. The opening joint requires flexible rotation and no rubbing sound.

4/. Main dimensions. The main dimensions (i.e. functional dimensions) of furniture are required by national standards. For example, it is stipulated in the wardrobe that the depth of the space in the wardrobe should be greater than or equal to 530mm, the distance between the upper edge of the clothes rail and the upper surface of the bottom plate should be greater than or equal to 1400mm, the height of desk furniture should be 680mm~760mm, the middle clearance height from the lower edge of the middle drawer of the desk to the ground height should be greater than or equal to 580mm, and the clearance height between bookcases should be greater than or equal to 230 mm ~ 310 mm. If the furniture is smaller than the specified size, it will bring a lot of inconvenience and affect the use.

5/ Limit of harmful substances in wooden furniture. At present, the harmful substances in furniture are mainly free formaldehyde released from wood-based panels and adhesives, and soluble lead, chromium, cadmium and mercury in furniture paint films.

How to distinguish formaldehyde in furniture? When buying furniture, you can first get close to the drawers and wardrobes of the furniture and smell them with your nose to see if there is a pungent smell and whether it is strong. If you feel a strong pungent smell, accompanied by tears, itchy throat, cough and other discomfort, then don't buy this kind of furniture. Secondly, let the furniture factory provide the certificate of raw material inspection, see if the materials used by the factory are qualified, and control the furniture materials from the source. In addition, it is necessary to carefully check whether the edge of wood-based panel furniture is sealed, because the formaldehyde emitted by the edge of wood-based panel furniture is the most powerful. According to the furniture standard, the edges of wood-based panel furniture must be sealed.

Two: the purchase of sofa

Sofas are divided into leather sofas and artificial leather sofas, and five aspects should be paid attention to when purchasing:

1/. The shape of the sofa. The appearance of the sofa should be full and symmetrical, the height should be appropriate, the fabric has no obvious color difference, and the fabric patterns of stripes and squares should be symmetrical accordingly. The fabric has no defects such as damage, stains, and needle jumping. There are no stitches or floating lines in the suture. Exposed foam nails should be arranged neatly without looseness, flattening, paint stripping and other defects.

2/. The wooden part of the wooden sofa. The wooden part of the wooden sofa requires no cracks and looseness; The surface paint film coating is smooth, similar in color, and no paint film falls off.

3/. Structural strength of sofa. When purchasing, you can shake the armrest and backrest of the sofa by hand, touch the seat and back of the sofa by hand, and press it hard for 2~3 times to make the hand feel smooth and there is no spring friction sound. According to the feeling of pressing, it is estimated whether the seat surface of sofa can bear the pressure of human body for a long time.

4/. Leather sofa requirements for leather materials. According to industry standards, all leather sofas are covered with natural animal skin except the bottom of the sofa seat. The product of the nominal leather sofa stipulates that the chair surface, the front of the backrest, the upper edge of the backrest, the inner side of the armrest and the upper edge of the armrest are all covered with natural animal skin.

5/. Main dimension requirements of sofa. QB/T 1952. 1-2003 "Soft Furniture Sofa" industry standard stipulates that the height of sofa seat surface is 360mm ~ 420mm；; The depth of the seat is between 480mm and 600mm; The height of handrails is less than or equal to 250 mm, and the height of back is greater than or equal to 600 mm These main dimensions are mainly specified to meet the basic requirements in use.

///////////////////////////////////////////////

Hangzhou Ye Rong Office Furniture Co., Ltd. is a large private enterprise integrating production, sales and design. Is currently one of the largest office furniture manufacturers in East China, with a production base area of 70,000 square meters and a comprehensive output value of 500 million yuan. It is a procurement unit designated by the central government. The company's products are positioned in high-end, moderate in price and complete in categories, and have a good reputation and credibility in the industry and customers.

The company has nearly 65,438+0,000 employees, 80% of whom have college education or above, and more than 90% of the production workers have received professional training and intensive training. At present, an excellent management, design, production, sales, installation and after-sales service team has been formed. The establishment of "Ye Rong Wen Yi" brand has established the prestige of state-owned brands and has been widely recognized by customers. In March 2002, the company passed ISO900 1:2000: 2000 quality management certification and ISO14025/ISO14001green environmental protection certification, and was awarded as a provincial quality furniture product for four consecutive years. In June, 2002, the company was rated as a well-known office furniture enterprise in China by China Furniture Association, and was rated as an AAA enterprise in Hangzhou for four consecutive years.

Mainly supply office furniture products:

Large class table, supervisor table, filing cabinet, conference table, staff table, desk, screen, screen combination, high partition, training table, staff chair, large class chair, office sofa, coffee table, front desk, hotel furniture.

Hangzhou sales headquarters-

Mobile phone:13375715851(Miss Chen)

13067784344 (Zhao)

-(Please feel free to contact us if necessary)

Fax/Fax: 057 1-85046308

Address of the exhibition hall: Building A, Provincial Hardware Market, No.456 Shiqiao Road, Hangzhou

Website/

Alibaba: