Pacific auto network 1. Turn on the navigation switch button (usually the button in the leftmost circle and vertical line). Second, after opening, the initial interface will be displayed (generally, the radio station will be displayed first), and then click the menu bar button in the interface (generally at the lower left). 3. Click the "Navigation Bar" button in the menu bar to enter the navigation interface. Fourthly, according to the position determined by GPS, you can now find the destination you need to reach.

The specific methods of developing all are as follows:

1. First, open the car navigator to enter the main page and click "Find Destination".

2. Then enter the destination and proceed to the next step.

3. Then find the "Set Destination" option and click it to navigate.

Matters needing attention in using car navigation system:

1. When driving a motor vehicle or riding a bicycle, it is recommended not to operate the navigation system to ensure driving safety.

2. If you use the navigator on the plane, it is recommended to consult the airline first. You must be very careful when using electronic equipment in flight.

3. Do not use the navigator near the place where strong radio or radiation will be generated, which may cause the equipment to fail to work normally.

4. When using, please be careful not to let the navigator fall or collide with hard objects, otherwise it may damage the appearance and hardware of the machine.

Please don't expose the navigation equipment to moisture or rain. If the equipment is flooded or wetted, it may lead to equipment failure or even maintenance failure.