1. Operators must be trained and qualified before they can take up their posts.

2, the operator must wear labor protection articles, to prevent electric shock, burns, arc eye injury and mechanical damage.

3, the welding site should maintain a good safety environment, objects that hinder safety should be cleaned up, and pay attention to fire prevention, explosion prevention, dust prevention and ventilation.

4. Check whether the welding machine is normal before going to work, and lubricate all lubricating points according to regulations to keep the flexibility of all moving parts.

5. After inspection, if there is no problem, the equipment can be adjusted for welding according to the welding mode and welding process on duty.

6. Pay attention to safety when hoisting weldments, handle them with care and put them in the correct position.

7. Various welding methods shall be operated according to the instructions.

8. During the welding process, always pay attention to the flexibility of each travel switch action, whether the mechanical protection block is loose or damaged, and report the problems to the production manager in time so as to send someone to handle them.

9. When adding flux to the funnel, be careful not to sprinkle flux on the lead screw and guide post of the carriage, so as not to accelerate wear and seizure. If it is scattered, it must be cleaned up in time.

10, power off after work, clean up the site, and clean up the dust on the moving parts such as guide rails, lead screws and nuts.