If it is a circuit board (PCB), the production process is mostly related to chemical industry. Because the process flow is very long, transfer from the inner circuit layer, etching, electroplating, film removal and so on. Multilayer board needs pressing, from drilling, laser, external circuit making, and finally surface treatment, separation, electrical measurement and so on. Quality personnel have on-site inspection, statistical analysis of yield, process tracking and monitoring, quality system maintenance, etc. Depending on the position.
Generally speaking, it is not recommended to enter the PCB industry, which is an industry with high pollution and low added value of technology.
For reference only.
What does a quality engineer in a circuit board factory do? He is responsible for the scrap registration of the quality department, the number of departments entering and leaving, and everything, depending on each factory. Ask me when I will go for an interview. I also read these requirements written by the recruitment quality clerk of PCB factory on the pcb8 18 talent website. I suggest you know more about it.
What are Korean translators and Korean lecturers who know Korean quality? If you graduate from normal university, you can be a professor in Korea.
What does a production line technician do? Technician refers to a person who can complete a specific technical task, that is, a person who has mastered the basic theory and skills of a specific technology and can engage in basic work in this technical field.
I. The main work of the production line technician is as follows:
1, under the leadership of the production manager, carry out various production technical work;
2. Assist the process technical supervisor to prepare technical documents such as product process regulations, product process cards and post operation methods;
3. Assist the process technical supervisor to prepare the consumption quota of raw and auxiliary materials and packaging materials, as well as the reserve of intermediates, and check the implementation of the workshop;
4. Participate in process audit, process transformation and trial production of new products;
5. Participate in technical research activities, popularize advanced technologies, and solve production technical problems at the production site;
6. Complete other tasks assigned by superiors;
7. Review the consumption quota of raw and auxiliary materials in the workshop, and have the right to suggest punishment.
Second, the main responsibilities of production line technicians are as follows:
1. Be responsible for the summary and review of production batch records, and deliver them to QA (Quality Assurance) supervisor in time;
2, responsible for the workshop production schedule and various production records on-site spot checks, and make process verification records;
3. Responsible for collecting and sorting out technical data, establishing process technical files and implementing file management system;
4. Have the right to stop and suggest punishment for violations of process regulations, post operation and process discipline.
Three, production line technician job requirements are as follows:
1, bachelor degree or above, major in electromechanical, automation, electronic engineering and other related fields;
2, can bear hardships and stand hard work, with professionalism;
3, more than 2 years experience in solar cell production process;
4. Be able to skillfully prepare the production process;
5, familiar with the formulation of material quota;
6. Skillfully use AutoCAD (Automobile Computer Aided Design) and other drawing software;
7. Basic English listening, speaking, reading and writing skills;
8. Diligent and practical work, clear thinking;
9. Strong sense of innovation, good communication skills and cooperative spirit.
What do laboratory technicians do in the circuit board factory? Chemicals used in production should be tested every day, including the content, concentration and pH value of chemicals (solutes). The main chemicals are the concentration of surface treatment chemicals such as copper plating solution, etching night and organic coating of gold-plated silver. These items are either acidic or alkaline, which are basically similar to the chemistry laboratory in the school.
What does the cartographer do in the factory? CAD SOLIDWORKS
These two softwares should be proficient.
What exactly does the quality department of a factory do? Functions of Quality Department:
Resolutely obey the command of the competent deputy general manager, conscientiously implement his work instructions, and report all management actions to the competent leader; Strictly implement the company's rules and regulations and earnestly perform their duties;
Be responsible for organizing the formulation, inspection, supervision, control and implementation of management systems such as quality management and quality inspection standards for measuring tubes;
Responsible for organizing the preparation of annual and monthly work plans for product quality improvement, improvement, management and measurement management. And organize the implementation, inspection, coordination and assessment, and timely handle and solve all kinds of quality disputes.
The significance of enterprise management:
Enterprise management can improve the operational efficiency of enterprises;
It can make enterprises have a clear development direction;
Can let each employee give full play to their potential;
It can make the enterprise financial clear, the capital structure reasonable and the investment and financing appropriate.
The main functions of the quality department:
1. resolutely obey the command of the deputy general manager in charge, earnestly implement his work instructions, and report all management actions to the competent leader;
2. Strictly implement the company's rules and regulations and earnestly perform their duties;
3. Be responsible for organizing the formulation, inspection, supervision, control and implementation of management systems such as quality management and quality inspection standards for measuring tubes;
4 responsible for organizing the preparation of annual and monthly product quality improvement, improvement, management, measurement management and other work plans. And organize the implementation, inspection, coordination and assessment, and timely handle and solve all kinds of quality disputes;
5. Be responsible for establishing and improving the quality assurance system. Formulate and organize the implementation of the company's quality work outline, improve the quality management network, formulate and improve the quality management target responsibility system, ensure the stable improvement of product quality, and strive to pass the ISO9000 demonstration as soon as possible;
6. Cooperate with the personnel department to do a good job in quality education for all employees. Regularly organize quality education and training for quality inspectors, measurers, managers, leaders at all levels, marketers, maintenance personnel and operators, strengthen quality management, improve the quality awareness and quality management level of all employees of the company, strengthen the training and assessment of metrology and quality personnel, and establish and improve the system of holding certificates for metrology and quality personnel;
7. Be responsible for the supervision, inspection, coordination and management of the company's products, work and service quality;
8. Be responsible for collecting and mastering advanced experience of quality management at home and abroad, and transmitting quality information;
9. Be responsible for handling quality accidents of the company. Participate in handling quality incidents such as quality objections, returns and claims caused by product appearance. Take the lead in organizing the investigation, analysis, arbitration and coordination of various quality disputes, and clearly put forward the handling opinions. General quality accidents are handled by the department itself; Major quality accidents shall be handled by the department after being signed by the competent vice president, and then reported to the general manager's office meeting for discussion; After being signed and approved by the general manager, it shall be handled as follows.
10. Be responsible for establishing and improving the quality post responsibility system. Clarify the responsibilities, powers and obligations of each post, formulate or modify and strictly implement various operating procedures in time, and educate employees to strictly abide by technical discipline;
1 1. Responsible for collecting after-sales quality service data of the company's products. Conduct market research and customer spot checks regularly or irregularly, select and write high-quality market research and analysis reports in time, and put forward improvement opinions and suggestions to provide basis for company leaders' decision-making;
12 is responsible for compiling annual, quarterly and monthly product quality statistics. Establish and standardize the quality statistical procedures for original records, ledgers and statistical statements, train professional quality statisticians, and improve their professional level and work quality;
13. Responsible for regular quality work report. Regularly report the balance of annual, quarterly and monthly production and operation plans orally or in writing. For major quality accidents, special analysis meetings will be organized to report centrally, and special emergencies will be reported to the competent leader or general manager separately;
14. Complete other tasks assigned by company leaders on time;
Xi An has a factory that produces circuit boards. Xi 'an's foreign companies increased their capital and shares, and the British factories moved to Xi 'an.
■ Reporter Mo Ruining
There is a foreign-funded enterprise in High-tech Zone that produces electronic components called Shengsaier. Don't dismiss it just because its name sounds unfamiliar, there are not many workers and the factory area is not large. It is not like a big enterprise in any way, but it occupies 40% of the domestic fire sensor market. With only one small sensor, Shengsel earned 350 million yuan last year. Recently, Shengsaier Company is busy with one thing. The new factory in the south of Huancheng Expressway with an investment of 30 million yuan will be put into production in August.
It is not a big deal for a factory to invest tens of millions to build a new factory, but if Xi 'an's new factory is specially prepared to receive the production line moved from Britain, it will become something that China people can be proud of. This matter should also start with the superior group of Shengsaier: Shengsaier was built in An in 1994, when the holding company was PITTWAY Group of the United States, and later all its shares were transferred to Horner Group of the United States, a world-famous electronic original device enterprise. St. Selma's business in Xi 'an has been very good, and it ranks among the best in the whole Horner Group. Last year, Horner Group acquired a similar factory producing fire sensors in Britain. For commercial reasons, Horner Group is going to close its British factory and transfer its production line to other countries.
Where are you going? Investing in multinational companies with companies in Europe and Latin America is, of course, a global choice. Some Horner Group executives proposed to go to India, where it is good and the labor cost is low; Some people say that China Xi is very attractive, and our business there is doing well. Finally, Horner Group chose Xi 'an after several choices. After all, the advantages of Xi are obvious. Horner Group believes that the investment environment here is good, the profit is high, the level of workers is high, and the labor cost is relatively low. It turns out that the technical experts in the British factory are still a little worried. "Sensors are very sensitive and have high environmental requirements. Can Xi 'an's urban environment and production environment be achieved? "Can Xi people make such cutting-edge products?" With doubts, Horner's delegation, mainly British, came to Xi 'an. "Oh, the air environment in Xi 'an is not bad, and the level of workers is quite high. "After the inspection, the British satisfactorily selected workers to go to the UK for training. Later, the products produced by Xi 'an were better than those produced in Britain. Horner Group decided to move the British production line and equipment to Xi 'an, and then invested 30 million yuan to rent a factory and buy equipment for Shengsel Company. With the arrival of the British production line in Xi 'an, the company can increase its income by 25 million dollars a year. Not only that, Shengsel Company also acquired a fire-fighting equipment factory in Xuzhou this year to expand production. He Jun, deputy general manager of AXA, who told reporters about the relocation of the British factory, remembers that since its opening, due to its good performance, Xi AXA has only increased its registered capital twice in the United States, and generally added more investment.
St. Selma is just a microcosm of Xi 'an foreign-funded enterprises. Since 2005, in the past three years, foreign-funded enterprises have increased their capital investment in clusters, from accommodation and catering, to real estate, to manufacturing and processing industries. Foreign-funded enterprises that have tasted the sweetness of investing in Xi 'an have taken action one after another, from 350 million to hundreds of millions of dollars, increasing investment, expanding equity and allocating quotas ... They have increased their investment in Xi 'an in various ways. Every year, a large number of foreign-funded enterprises go through the formalities of increasing capital and shares, which makes the staff of the Foreign Investment Office of the Municipal Foreign Trade and Economic Cooperation Bureau a little overwhelmed. They recorded a number of investments: "In 2005, 465,438+0 enterprises increased their capital, with a total investment of $65.438+72 billion and contractual foreign investment of $65.438+26.5438 billion; In 2006, 33 enterprises increased their capital, with a total investment of $654.38+0.5 billion and contractual foreign investment of $654.38+0.4 billion. In 2007, 60 enterprises increased their capital, with a total investment of US$ 447 million and contractual foreign investment of US$ 288 million. In the first half of 2008, 28 enterprises increased their capital, with a total investment of $654.38+87 million and contractual foreign investment of $654.38+83 million. " It has become a trend for foreign-funded enterprises to increase capital and share in Xi 'an.
UID345 post 7299 essence 15 points 43 16 reading rights 200 online time 3092 hours registration time 2005-4-4, and finally log in 2008-1-9 to view the personal website.
View details
top
What does a physical test technician in a circuit board factory do? You mean the staff in the physics laboratory of the circuit board factory!
Every day is to check the copper plating thickness of the wrench and the tolerance of surface treatment.