In the process of our family decoration, the hydropower transformation in family decoration is a key project, because it is closely related to the daily life after decoration. For us, if we don't understand the standards of water and electricity decoration, it will bring great difficulties to the decoration or the acceptance after the decoration. What are the specific standards that need attention? Let's study together. Standard 1 for hydropower renovation of home decoration: circuit renovation technology. Attention should be paid to the appropriate depth of the wall slot, too deep is easy to damage the wall, too shallow is easy to crack. The most suitable depth is 1.5 times the diameter of buried pipeline; At the through-wall joint, it should be fixed with a special lock nut and glued firmly, so as to ensure that the catheter will not loosen; The wiring of the box should also be constructed according to the standard, and the spacing between strong current and weak current should be strictly observed. The distance between strong current and weak current is generally 15 to 20 cm to avoid signal interference between strong current and weak current. Standard 2 for water and electricity renovation of home decoration: waterway renovation process 1, bathroom: the water pipe in the bathroom should be below 50 cm from the ground, so that the water pipe can be effectively blocked when installing the washbasin without affecting the appearance; The distance between the water heater and the ground is generally around 180 cm; The mop pool is about 75 cm from the ground; Unless otherwise specified, the water pipe spacing should be about 10 cm. The floor and corner of the bathroom should be waterproof. 2. Kitchen: On the premise of ensuring water and water tightness, the renovation of the kitchen waterway should be people-oriented and ergonomic. The water pipe of the kitchen basin is about 60 cm from the ground; U-shaped filter pipe should be used for the sewer pipe of the basin to prevent debris from blocking the sewer when washing vegetables; Waterproofing should be done around the kitchen basin. Standard 3 for hydropower renovation of home decoration: floor heating construction technology. Slotting is not allowed on the ground with floor heating, so as to avoid accidental injury to the floor heating pipeline and water seepage. If slotting is really necessary, it should be done without damaging the whole floor heating structure. For the acceptance of floor heating, pressure test is needed, and the purpose of pressure test is to check whether the floor heating pipeline is damaged. If there is any damage, check the architectural design and installation drawings for maintenance, and try to avoid large-scale damage to the ground. Let's share the standards of water and electricity decoration here. We need to remind you again that water and electricity decoration is a hidden project in decoration, which is directly related to the comfort and safety of living in the future. When choosing, we should also try to choose big brands to avoid unnecessary troubles in the future. Through the above introduction, I hope you can also understand the standards of hydropower decoration, which can come in handy then. If you think it's okay, give it a compliment.