Safety production target responsibility management system

In order to conscientiously implement the safety production policy of "safety first, prevention first". In order to gradually implement modern safety management, this system is formulated:

A, the company in the preparation of various plans and annual plans, put safety work on the top agenda. According to the principles, policies, laws and regulations of the party and the state, and the instructions and requirements of the superior, combined with the specific situation of the unit, the company-wide safety production target value is put forward. The contents include the frequency of industrial accidents, the numerical values of death rate and serious injury rate, the qualified rate of occupational hazard areas, the cost of safety technical measures, etc.

Second, when the company signs a contract or issues a work plan with its subordinate project department and construction team, it decomposes the company's target responsibility system for production safety into each unit as an important indicator for the company to assess each unit;

Three, each unit in signing a contract with a team or individual or task, should also be included in the safety target responsibility system, as one of the assessment content;

Four, the company's work to implement a safe one-vote veto, where the occurrence of major casualties and more than the target value of safe production, all units and individuals will be disqualified from the evaluation of the year;

5. The company organizes a safety inspection once a month, and analyzes and summarizes the completion of safety production targets together with the inspection;

Six, safety production target responsibility management and economic responsibility system are closely linked.

Regular meeting system of safety production

This system is formulated in order to further improve the safety production and strengthen the awareness of safety production.

A, this system is applicable to the company and the project department.

Second, the heads of all departments and project departments and full-time safety production management personnel must attend each regular meeting. If you don't attend without reason, you will be fined according to the company's relevant system and included in the year-end unit assessment index.

Third, the content of the meeting.

1. The safety manager of the company presided over the meeting and read out the main contents of the meeting.

2, convey the relevant documents and the spirit of the meeting.

3, according to the production situation, learn about safety regulations and safety technology, etc.

4. All departments and project departments will introduce the safety production and accidents this month, and exchange experiences after each large-scale activity.

5. Arrange safety work and safety activities for next month.

4. Release relevant documents and materials: construction safety-related documents, technical publications, safety briefings, various reports, etc.

5. 3: 00 a.m. on 30th of each month is the regular meeting time of production safety. If there is any temporary change in the time and place of the regular meeting, the security department of the company is responsible for notifying in advance.

Safety production education system

This system is formulated in order to make employees continuously improve their understanding of the great significance of safe production, enhance their consciousness of observing rules and regulations and labor discipline, avoid accidents and ensure the smooth progress of various construction projects. It is necessary to comprehensively, deeply and regularly educate employees on safety production ideas, safety technical knowledge, rules and regulations and operation techniques.

Primary and higher education:

1, new employees must undergo safety education or training from the company level to the project level to the team level.

2. The first-level safety education that new employees must receive (company level) includes: guidelines, policies and regulations on safety production in the construction industry; Production characteristics of our company; All safety production operation procedures; Positive and negative experiences and lessons of safety production; General safety rules of the company and common sense of fire fighting and first aid, etc.

3. Those who pass the first-level education safety knowledge examination will be given the second-level education (project level) by the project department. The contents include: the characteristics of this project, equipment characteristics and accident prevention methods; Safety technical regulations, systems and safety precautions, etc.

4, after passing the secondary production safety knowledge examination, assigned to the team for tertiary education (team level). The contents include: post production characteristics and safety devices; Instruments and personal protective equipment and their use methods; Accidents in this position and their lessons.

5, after passing the level 3 safety education exam, can mount guard operation.

Second, the special type of work education:

Workers engaged in special types of work, such as electrician, crane, welding, aerial work, scaffolding work, etc. , should participate in professional intensive training courses, to carry out intensive study of professional safety technical knowledge.

Third, daily education:

1. Leaders at all levels of the company should consciously study and implement safety production rules and regulations at ordinary times, adhere to the "five simultaneities", and especially strengthen regular education for workers, and educate employees to observe rules and discipline and perform safety duties.

2, each team should be based on the nature of the work, priorities, production characteristics, climate change, by the team leader or team safety officer, safety speech before class, safety publicity in class, safety evaluation after class, pays special attention to the typical, strengthen the exchange of experience, organize technical demonstration, etc.

3, each project department should adhere to the safety activities at least once every two weeks, do it in a planned, purposeful, demanding, step by step, and constantly improve the quality, to prevent a mere formality. The content is as follows:

A, convey and carry out the instructions, notices and documents related to safety in production.

B, check the implementation of the relevant safety rules and regulations.

C, analyze and study the accident situation, receive education, and put forward preventive measures.

D. Educate employees about safety technology and occupational health knowledge.

E, exchange and promote the advanced experience of safe operation, and carry out technical demonstration.

F, to carry out anti-accident struggle, accident drills.

G, visit the safety production exhibition, to carry out safety production competition.

H, mobilize all staff, discuss and put forward reasonable suggestions to solve safety defects.

First, summarize the law of safe production, praise good deeds and criticize all kinds of wrong tendencies.

Four, safety inspection:

1. Conduct safety technology education for employees 1-2 times a year. There are various assessment forms, and the assessment results must be recorded and filed.

2. Those who fail the exam should make up the exam. Those who fail to pass the make-up exam should leave their posts for special safety production study, and then make-up exam. Those who are still unqualified should be transferred and relieved according to the situation.

3, safety test scores should be used as one of the criteria for employee promotion and selection of cadres.

Safety production inspection system

This system is specially formulated in order to know and master the situation of safe production in time, discover hidden dangers of accidents in time, eliminate unsafe factors and nip in the bud.

I. Contents of safety inspection

1, check idea: check whether the understanding of safety in production is correct; Check whether the sense of responsibility for production safety is strong; Check whether you dare to fight against thoughts and behaviors that ignore safety in production.

2. Check the system: check the establishment and improvement of the safety production system, and see if there is any illegal operation; Check the implementation of the safety production system to see if there are any illegal and risky operations.

3. Discipline inspection: check the implementation of post labor discipline, and check whether there is any situation that has nothing to do with production without leave.

4, check the leadership: whether the leadership put safety in production on the agenda; Whether the employees who have made remarkable achievements in safety production are praised and rewarded in time; Whether the person responsible for the accident caused by neglecting safety production has been dealt with seriously; Whether production and safety have achieved "five simultaneities".

5. Check hidden dangers: whether civilized and safe production has been achieved; Whether each device has a safety device; Whether there are safety factors in the project under construction; Whether platforms and railings are safe and reliable.

Second, the form of production safety inspection

1, comprehensive safety inspection:

A, the company's production safety inspection: once a month, the company leader in charge of production safety is responsible for convening relevant departments, mainly the safety department, to form an inspection team to inspect all projects. Inspection and rectification shall be summarized and reported by the Security Section.

B. Project-level safety inspection: twice a month. The project manager is responsible for convening relevant personnel to form an inspection team for inspection, inspection and rectification, and the safety officer will summarize and report the situation.

2, professional production safety inspection:

A, professional production safety inspection, shall be the responsibility of the competent department, called the relevant project department to participate in, on a regular basis. Inspection and rectification will be reported and copied to the company's security section.

B, professional production safety personnel for each project inspection, must make a detailed registration, each inspection must make an accurate identification of the problems registered in the previous inspection.

3, seasonal production safety inspection:

The competent department is responsible for seasonal safety production inspections such as heatstroke prevention and cooling, rain and flood prevention, lightning protection, cold and antifreeze, etc., organizing relevant units to carry out them, mobilizing the masses to do a good job of prevention, and reporting and copying the inspection and rectification to the Security Section.

4, regular production safety inspection:

First, every employee must adhere to the safety inspection system before and after operation.

B, each team must adhere to the safety inspection system before and after work.

C, managers at all levels and full-time security officers must combine their own work and go deep into the production site for safety inspection.

D, production safety inspection should adhere to the combination of general inspection and professional inspection; Combination of regular inspection and temporary inspection; Combination of inspection and rectification.

5. Unsafe factors found must be implemented in accordance with the "three decisions" measures, that is, the project, time and specific person to complete the project.

6, production safety inspection system should also be combined with production safety rewards and punishments system and employee appraisal system. The inspection results should be used as one of the criteria for reward and punishment or promotion assessment.

Safety production reward and punishment system

In order to strengthen safety in production and conscientiously implement the policy of "safety in production, prevention first", this system is specially formulated:

First, study.

1. On-site technicians and team leaders shall make safety technical disclosure on a monthly basis, organize the study of operating procedures and relevant laws in time, and report to the archives. Otherwise, the site technician or responsible team leader will be fined 100-500 yuan.

2, the team leader to security team operation twice a day, otherwise the team leader shall be fined 50-200 yuan.

Second, the illegal operation

1. If an accident is caused by the technical personnel's illegal guidance, the technical personnel shall bear the economic responsibility of 10-20%.

2. Whoever fails to wear personal protective equipment such as safety helmet, safety belt and safety rope before operation will be fined 50- 100 yuan. Those who cause accidents shall bear 20-30% economic responsibility.

3. If the on-site commander leads an accident in violation of regulations, he shall bear 20-50% economic responsibility.

4. Operators who disobey instructions and violate rules will be fined 50- 100 yuan.

5. If an accident is caused by unauthorized illegal operation, the parties concerned shall bear 50- 100% economic responsibility.

6. If an accident occurs due to illegal operation during non-working hours, all losses shall be borne by the parties themselves, and a fine of 50-200 yuan shall be imposed, and those with serious circumstances shall be dismissed.

Third, falling objects from high altitude

1, the falling object from a height did not cause an accident, but it had a great impact, and the responsible person was fined 50-300 yuan.

2. If an accident is caused by falling objects from high altitude, the responsible person and the responsible team shall bear 10-60% of the economic responsibility.

3. If the accident is caused by falling objects from high altitude, the responsible team will bear 50% of the economic responsibility if the responsible person cannot be found.

Fourth, the environment

1, the construction site must be cleaned once a day to keep the site clean and tidy, and the materials should be piled up reasonably, otherwise, the site technicians and team leader will be fined 10- 100 yuan.

2. If serious environmental pollution or waste of materials is caused, the technicians and team leaders on site will be fined 100-500 yuan.

Verb (abbreviation for verb) check

1, self-check

A, before construction, the team leader must carry out pre-shift inspection to check whether employees' personal protective equipment is worn, worn and fastened, and whether there are hidden dangers in the workplace, and handle them in time. No construction can be carried out without proper treatment. Otherwise, the team leader will be fined 50-200 yuan.

B, establish post management responsibility system (responsibility to people) and equipment maintenance management system, as well as the corresponding information reporting, storage and implementation. Otherwise, the responsible person will be fined 50-200 yuan.

C, product quality inspection before use, confirmed qualified rear can use, otherwise the team leader will be fined 100-200 yuan, and the accident will be handled according to relevant regulations.

D, found that the security risks should be timely rectification, otherwise the site technical personnel and responsible team 100-500 yuan.

2. Earnestly and actively carry out, execute and implement the "safety inspection" activities of superiors, and deploy, plan, arrange, inspect, rectify and implement them as required, otherwise the on-site technicians and responsible teams will be fined 100-500 yuan.

3, protect and keep all kinds of signs, warning signs and signs in good condition, clean and tidy. Set warning signs, warning areas, etc. Reasonable, otherwise the on-site technical personnel and team leader will be fined 50-300 yuan. In case of related accidents, the responsible technicians and teams shall bear less than 50% of the economic responsibilities.

Determination of the responsibility of intransitive verbs

Every accident in our company will be identified as responsibility, and we will bear the corresponding responsibility after identification. There are four kinds of responsibilities: direct responsibility, main responsibility, important responsibility and leadership responsibility. )

1. If it is determined as the direct responsibility, the responsible person or responsible team shall bear 50-80% of the economic responsibility.

2 to determine the main responsibility, the responsible person or the responsible team shall bear 20-50% of the economic responsibility.

3, that bear important responsibility, responsible person or responsible team bear 5-20% of the economic responsibility.

4, that negative leadership responsibility, the relevant responsible person to bear the economic responsibility of less than 20%.

5. If there are more than two responsibilities, the relevant responsible parties shall share the economic responsibilities according to the relevant proportion.

6. Those who fail to report the accident information timely and accurately will be fined 100-500 yuan.

Seven, civilized construction

1. Anyone who uses uncivilized behavior, actions, language, etc. at will. Anyone who tells others what to do at work and refuses to change after repeated instructions will be fined 50-200 yuan.

2. Those who beat people at will will be fined 100-300 yuan, and will be dismissed if the circumstances are serious.

3. Pay a fine of 50-200 yuan for being impolite to the superior leader.

4. Dress untidily in public places, or commit immoral acts, and be fined 50- 100 yuan.

Eight, reward

1. Personal reward for taking the lead in observing safety production rules and regulations and outstanding performance 100-200 yuan.

2, a single project, in the project schedule, quality, safety in production, work performance remarkable team award 200-500 yuan.

3, in the quarterly or annual and single project safety production evaluation, the outstanding performance of the relevant safety technical personnel and team to give 200- 1000 yuan reward.

Investigation, analysis, reporting and handling system of industrial accidents

I. Industrial accidents and their classification

1 According to the Regulations on Reporting and Handling Casualty Accidents of Enterprise Employees, all personal injuries and acute poisoning that occur in the process of labor are called casualty accidents.

2. Industrial accidents are divided into four categories according to injuries: major accidents, minor injuries, serious injuries and deaths. Refer to GB64 1 1-86 Classification Standard for Casualty Accidents of Enterprise Employees for specific division.

Second, the report of industrial accidents.

1. After an industrial accident, the injured person or relevant personnel on site shall immediately report to the team, the project department or the relevant person in charge of the company and the safety supervision department.

2. When the person in charge of the project department or company receives an accident of serious injury or death, it shall immediately report to the competent department and other relevant functional departments.

3, should protect the scene as much as possible, quickly take necessary measures to rescue personnel and property, to prevent the accident from expanding.

4, such as special circumstances need to destroy the scene, the scene should be marked or recorded.

Three. Accident investigation and analysis

1 For minor injuries and serious injuries, the company manager or the deputy manager in charge of safety shall organize the safety, technology and production departments and trade union members to form an investigation team to investigate.

2. The company will do its best to actively assist the investigation of any accident involved by the higher authorities as required.

3. All units and individuals involved in the investigation must truthfully answer relevant questions to relevant personnel and provide relevant evidence and testimony. Do not resort to deceit or conceal the truth of the accident.

4. We must find out the time, place, process, cause, casualties and economic losses of the industrial accidents handled by our company.

5. Hold an accident analysis meeting to determine accident treatment opinions and preventive measures.

6. Write an accident investigation report.

Four, accident handling and archiving

1. The industrial accidents handled by our company must be studied and handled by our company after the accident investigation team writes the accident investigation report.

2. The accident treatment results should be publicly announced to the cadres and workers of the whole company. And write a written report on the handling of the whole accident and report it to the relevant departments.

3. The accident handling must be fair and reasonable, without accommodating or avoiding, so as to achieve the "three-no-let-go" of the accident.

If you are not satisfied with the handling of this company, you can raise an objection and sue the superior department.

5. After the accident treatment is closed, the company's security department is responsible for collecting and sorting out all relevant materials, and filing them for card building.

6, must go through the formalities for examination and approval of inductrial injury, shall be handled by the company.

Site civilization construction management system

First, the construction site should have construction signs, safety signs and safety slogans;

Second, according to the specific situation at the scene, hang up the safety net and safety isolation device to prevent falling objects from hurting people;

Three, enter the construction site personnel must wear safety helmet and personal protective equipment in accordance with the provisions;

Four, scaffolding (including unloading platform) must meet the standards;

Five, the construction site machinery, equipment and objects should be kept clean and tidy;

Six, the construction personnel should be civilized construction, be polite and civilized, do not fight;

Seven, abide by the relevant rules and regulations of the construction unit;

Eight, do a good job in the safety protection of the "four ports" on the construction site;

Nine, as far as possible to ensure smooth roads;

Ten, electrical equipment and electrical lines should have good zero protection. The power cord should be intact and bare;

Eleven, the construction site to do a good job of fire prevention, explosion-proof, flammable and explosive, flammable and explosive items should not be placed in the job site with sparks;

Twelve, seriously accept the inspection of the superior departments and internal personnel of the company.