Glue coating skill
The wall was coated with glue. After cutting the wall covering according to the size, apply the evenly mixed glue to the wall. Be sure to apply glue evenly. Remember to glue wall covering. If you accidentally stick the glue to wall covering, wipe it with a damp cloth immediately.
Glue selection should be appropriate.
Stick wall covering with super glue. In order to ensure the environmental protection of the whole decoration, please choose glue with higher environmental protection level.
Wall covering can't soak in the water.
Don't soak wall covering before pasting.
Very picky about flowers
Everything must be superimposed and trimmed with flowers, wall covering. Remember to start from the middle of the wall, so as to ensure the best decoration effect of the wall coverage.
The side seams must be pressed firmly.
After wall covering is pasted, it will inevitably produce side seams, and improper handling of side seams will inevitably affect the overall effect, so it must be pressed firmly with a pressure wheel, otherwise it will not only affect the appearance, but also easily crack after wall covering is dried.
Ensure cleanliness
Not only to ensure the cleanliness of wall covering, but also the hand cleaning of construction workers will have an impact on the effect of wall covering's posting.
Ensure natural drying.
In order to avoid curling and cracking in wall covering, it is very important to ensure the natural drying of wall covering. Therefore, the doors and windows should be closed at least 2 days after the wall covering is pasted to prevent natural wind from blowing in, and air supply equipment such as air conditioners, dryers and electric fans are strictly prohibited.
Mucus removal and bubble detection
After wall covering is pasted, the excess mucilage shall be wiped off immediately with a wet rag. In addition, carefully check whether there are bubbles. If there are bubbles, you can use a needle to let out the air, or you can use a needle to inject glue into the bubbles to scrape.
Pay attention to flower products.
All the flower matching products are built by overlapping hemming tailors, and the flower matching needs to start from the middle of the wall to achieve good flower matching effect.
Avoid glue sticking to the wall.
Brush glue on the wall to prevent the glue from sticking to the surface of the wall covering. If you accidentally spill it, wipe it with a damp cloth.