Doing a good job in safety education and training, consolidating the safety foundation and improving the safety culture quality, basic theory and basic skills of employees are the basis and important goal of doing a good job in safety production and building a safety culture in enterprises. Enterprises mainly strengthen employees' safety awareness and cultivate safety culture and ideas from the following two aspects.
A, organize the education and training of employees' safety thoughts, safety systems and safety technologies in a planned way, and constantly improve employees' safety skills and awareness.
Safety management exchange enterprises strictly implement the "three-level safety education" in safety education, educate new employees at the factory level as required, and supervise and inspect the second and third-level safety education, so that they can be familiar with and master the necessary safety technical knowledge and self-protection skills, and can only operate at their posts if they meet the requirements. For those who have transferred to other posts, changed production and returned to work, all units have been trained in safety skills and post operation methods as required, and they can only take up their posts after passing the examination. The safety assessment result is one of the bases for employees' promotion. According to the principle of "whoever is in charge is responsible, whoever uses it is responsible", migrant workers and temporary workers who have passed the safety training and examination and obtained the Safety Technology Operation Certificate of our factory can enter the factory to work. Foreign interns and visitors are not allowed to enter the production area before receiving safety training and completing relevant procedures.
Over the past year, while doing a good job in daily safety education, we have trained new employees 12, transferred 44 workers and returned to work 15 workers from other units. /kloc-from September to 23rd, September, 2009, 27 safety officers of secondary units in the whole factory were trained and strictly examined, which further improved the safety management, technical level and safety awareness of safety officers. Strengthen the training and evidence collection for special operators. In the whole year, 77 pressure vessel operators, 26 crane operators, 4 boiler water treatment workers, 2 welders, 13 welders, 2 electricians, 40 hazardous chemicals operators and 225 hazardous chemicals operators were retrained (including 65,438+operators). Combined with the actual production, all employees were given safety education in each workshop by using the production gap, including safety contents. At the same time, the education of employees with secondary school or college education and those who have returned to work and transferred to other posts has been strengthened, and their safety skills and awareness have been improved.
The second is to carefully organize various safety activities, build enterprise safety culture and strengthen employees' safety awareness.
1, seriously carry out the "three inspections and three defenses" to put an end to people's unsafe behavior. According to the spirit of "Emergency Notice on Seriously Carrying out the Activities of" Three Inspections and Three Contradictions "in the Whole System" (No.41), the factory department has set up an activity leading group headed by the deputy director of production, and the workshop director is in charge of the daily work of the deputy director and safety officer, and this work has been adhered to as a basic work of safety management for a long time. Firmly grasping the theme of "people-oriented, safety first", the enterprise has earnestly carried out the activities of "checking hidden dangers, loopholes and problems" and "anti-violation, anti-violation and anti-violation", actively checked and filled safety management problems and loopholes, carefully organized employees to discuss accident cases that occurred in recent years, learned safety management system and three major rules, increased penalties for violations and disciplines, strengthened safety management, and comprehensively improved employee performance.
2. Actively organize the "Safety Production Month" activities, and create a cultural atmosphere of "paying attention to safety and caring for life" in combination with the current safety production work. The activity closely revolves around the safety production policy of "safety first, prevention first", highlights the theme of "abiding by rules and laws, caring for life", implements the documents of higher authorities and the spirit of the meeting, strengthens safety management, increases publicity, comprehensively improves employees' safety awareness and implements various safety work. Carry out publicity and education on safety production knowledge, covering the safety production law, the State Council's Decision on Further Strengthening the Work of Safety Production, the former Ministry of Chemical Industry's Safety Production Ban, the Regulations on the Supervision and Administration of Safety Production in xxx City, the Eight Prohibitions on Chemical Safety Production in xxx City, the Regulations on Safety Production Management of xxx Chemical Pharmaceutical Holding (Group) Company and the Rules and Regulations on Enterprise Safety Management. Enterprises take "Safety Production Month" as an opportunity, actively organize employees to participate in the prize-winning competition on safety production knowledge organized by xxx Municipal Administration of Work Safety, and require all units to carry out a series of activities of "learning, knowing, understanding and abiding by the law", so as to further improve employees' legal awareness of safety production by fully learning relevant national laws and regulations on safety production and enterprise rules and regulations. The enterprise decided to use the form of "violation notification card" to serve illegal acts, illegal operations and illegal instructions to illegal units or personnel from the month of safe production, and incorporate the violation records into the economic responsibility system assessment of enterprises or units at all levels. According to the arrangement of "Safe Production Month" activities in the factory, the Safety and Security Department organizes all units to carry out cross-safety inspection between units, and urges all units to seriously carry out post safety self-inspection activities (first carry out self-inspection in the workshop, and then cross-check between workshops), improve the deficiencies found in the inspection, popularize good experience, and rectify the hidden dangers found in time. The factory trade union and the technical safety department organized a symposium on safety production experience with the theme of "I give advice for safety", which further improved the enthusiasm and sense of responsibility of employees to participate in safety work.
3, organize cross safety inspection activities, learn from each other, * * * improve. From September 14 to September 16, according to the requirements of the factory department, the safety department organized the safety self-inspection within the whole factory and the cross-inspection of some units. The inspection contents include the completion of safety objectives, risk analysis and control, safety education, safety maintenance and repair, fire-fighting facilities and supplies, on-site operation safety, safety inspection and evaluation, etc. During the activity, the responsible persons, safety officers and section chiefs of all units actively participated in the activity, communicated with each other deeply in the mutual inspection activities, and put forward good suggestions, so that the mutual inspection activities achieved the purpose of learning from each other and improving safety awareness and management level.
Summary of safety production management in chemical plants. Carry out various safety work according to the requirements of safety standardization specifications of hazardous chemicals business units.
Last September, I participated in the first training course on "Safety Standardization of Hazardous Chemicals Business Units" organized by the Provincial Security Center. The Standard for Safety Standardization of Hazardous Chemicals Business Units is in the trial stage, which has made more clear and specific provisions on all work of safety production. As a safety officer, I actively studied the specifications, compiled a detailed Implementation Plan for Safety Standardization according to the 10 A level elements and the 5 1 B level elements, and started work step by step according to these elements, so that the contents of the specifications can really run through the production activities, play their due role and promote the safety production in our factory.
In July, 20XX, the safety standardization assessment team made a self-evaluation of the work and got a good score of 98 points. After this self-assessment, the nonconformities in the self-assessment were rectified one by one, and passed the acceptance of the provincial security center on February 2 and 3, 20XX.
Second, take root in the front line of production and extensively absorb the experience of all parties.
In the new year, I hope I can have more opportunities to join the production line, because it can give me enough nutrition to grow. Only by truly taking root in the production line can we have a deeper understanding of occupational health, safety and environmental protection and promote my better work; Communicate with workers in the front line of production, and extensively absorb experiences from all sides, so as to find problems in time, expand their working ideas, and truly realize the coordinated development of occupational health and safety and the environment.
Third, correctly handle interpersonal relationships.
In daily work, there are many exchanges with superiors, office colleagues and workshop personnel, so problems of one kind or another may occur in the daily work process, and friction is inevitable. This requires me to straighten my mind and actively avoid such problems. Young people are easy to be impetuous at work, and they are likely to be thoughtless when dealing with problems. They will do irrational things on impulse, and I will try to avoid them in my future work. Correctly handle the relationship with other colleagues, and actively and optimistically help colleagues in trouble.
Summary of Safety Production Management in Chemical Plant 3 According to the requirements of higher authorities on carrying out 20XX Safety Production Month, combined with the actual situation of our factory, this activity was carried out throughout the factory closely around the theme of "safety development, prevention first". In order to make this safety production month a mere formality, the company has done the following work:
First, leaders attach great importance to it and organizational measures are in place.
In order to strengthen the organization and leadership of this safety month activity and ensure its effective implementation, the factory director is personally responsible for the organization and implementation of this safety month activity, and all departments actively cooperate. At the beginning of June, the implementation plan and time schedule of the safety month activity were formulated, and the specific responsibilities of various departments in this activity were clarified, so that the activity was "planned, arranged, inspected and implemented". And held a safety month mobilization meeting.
Second, carry out various forms of publicity activities.
During the safety month activities, the office is responsible for publishing rich safety month bulletin boards; The Safety and Environmental Protection Department is responsible for hanging safety month banners, posting 10 safety posters and making 30 new safety week cards. Stimulated the enthusiasm of employees to consciously participate in safety month activities, so that safety production really entered the hearts of employees.
Third, actively carry out safety education and training.
The Safety and Environmental Protection Department is responsible for organizing employees to watch the "CD of Safety Production Knowledge"; The factory director is responsible for organizing employees to learn the company's emergency plan and accident case analysis. We will also hold an activity in the whole factory to solicit suggestions on "habitual violation" and "rationalization of safety production".
Four, to carry out various forms of safety inspection
1. At the beginning of the month, the occupational health and safety leading group conducted a major inspection on the safety and hygiene of the whole factory.
2. Organize the team leader of the production department to conduct a major inspection on the safety and health of the production department. Let the team leader find the shortcomings of his team and correct them.
Fifth, carry out emergency drills.
Before the exercise, the Safety and Environmental Protection Department plans the exercise, and the factory director is responsible for organizing the heads of various departments to discuss and modify the planning contents. Through the exercise, we can test the suitability of the company's emergency plan, employees' understanding of the plan procedures and the level of emergency ability to correctly handle the fire. After the exercise, summarize and evaluate in time to lay a good foundation for next year's targeted exercise.
Six, to carry out safety knowledge competition, fire technology competition.
During the safety month, organize employees to conduct safety knowledge contests in the form of written answers; Carry out fire extinguisher drills and one-gun-one-belt double shooting competition, and set up the first, second and third prizes and participation prizes for every employee to participate.
Through this safety month activity, the whole company worked with one heart and one mind to actively implement various tasks and requirements, continuously deepen the company's basic management of safety production, and further improve the company's safety production management system and safety operation procedures. At present, the company's production safety situation is stable, and no production safety accidents have occurred.
Summary of Safety Production Management in Chemical Plant In the past 20xx years, under the care and guidance of the superior environmental protection department and the group company, the company earnestly implemented various laws and regulations, adhered to the guidance of Scientific Outlook on Development, strengthened the environmental protection target responsibility system, further improved the enterprise's environmental management ability, made great progress in all work, further improved the company's image, and successfully completed the annual task, which is summarized as follows:
First, improve the environmental management network and strengthen the construction of the responsibility system.
At the beginning of the year, according to the requirements of the superior environmental protection department and the group company, combined with the actual situation of the company, the objectives and tasks of 20xx annual environmental protection work were formulated. A special environmental management organization was set up, equipped with full-time environmental protection leaders, which enriched the part-time environmental protection managers at all levels and further clarified the environmental protection responsibilities of leaders, departments and employees at all levels.
Second, establish and improve the management system.
The company has established an environmental management system, improved various environmental sanitation management systems, seriously strengthened accident prevention and emergency measures from all aspects of procurement, storage and transportation, production and sales, and completed the preparation of an emergency plan for environmental accidents and reported it to the Municipal Bureau for the record.
In the process of establishing the QHSE system, the company established a series of environmental protection-related systems such as environmental management procedures and waste management systems according to the requirements of relevant standards, and identified the internal environmental impact factors of the company, * * * identified 296 environmental impact factors and 24 major environmental factors, and formulated control measures one by one.
Three, according to the implementation of new, modified and expanded projects "three simultaneities"
According to the requirements of national environmental protection laws and regulations, the environmental impact assessment of the company's projects was carried out. The corresponding environmental protection facilities of the project are designed, constructed and put into production and use at the same time. The pilot plant successfully passed the environmental protection completion acceptance in June165438+1October this year.
Fourth, strengthen publicity and training, and strengthen employees' awareness of environmental protection.
In 20xx, the company took the opportunity of "April 22nd" Earth Day, "June 5th" World Environment Day, and Energy Conservation and Emission Reduction Publicity Week to carry out extensive environmental protection publicity work, made two environmental protection publicity signs and windows, and distributed family environmental protection tips and brochures to all employees through the Internet to enhance their environmental awareness.
Five, strengthen supervision, carefully organize all kinds of special actions.
1. The company has two wastewater outlets, namely, production wastewater and domestic wastewater. The sewage outlet has been standardized as required, and wastewater flowmeter and COD automatic monitor have been installed as required by Taicang Environmental Protection Bureau. On-line TOC detector and flowmeter for sewage outlet of sewage treatment station are put into use in advance. The environmental protection supervision department pointed out in this year's inspection that the data acquisition system needs to be upgraded synchronously with Taicang Environmental Protection Bureau. At present, the data acquisition system has been upgraded, and the company's existing environmental protection treatment facilities are running normally, with special personnel responsible for operation and regular maintenance.
2. In accordance with the requirements of the superior environmental protection department and the environmental protection work of the group company, and in combination with the provisions of the company's environmental management procedures, we will continuously strengthen environmental inspection, consolidate the three-level environmental protection investigation and management network of post teams, departments and companies, resolutely manage the found nonconformities, and find and solve them early. Continue to do a good job in environmental protection at the production site, and the rectification rate of problems in 20xx is 100%.
3. In order to actively respond to possible sudden environmental pollution incidents and improve environmental emergency response capability. The partition system of rainwater pipes was reformed, and partition valves were installed at six rainwater pipes one by one to isolate the rainwater pipe network from the outside of the company in case of emergency, thus preventing the occurrence of pollution liability accidents. At the same time, the rain and sewage diversion facilities of each production device are reformed, and the discharge of production sewage and clean sewage is strictly controlled to achieve source control. In June, an emergency drill for sudden environmental pollution caused by oil tank leakage in the tank farm was organized. A total of 60 people from the company participated in the exercise, which lasted about 30 minutes. The exercise was effective, completed the envisaged purpose with high quality, exercised the emergency rescue ability of employees, and tested the effectiveness of the company's environmental emergency mechanism.
Disposal of intransitive verb "three wastes"
Properly dispose of all kinds of hazardous wastes and general industrial wastes according to the requirements of environmental protection departments at higher levels and the construction of QHSE system, as well as the requirements of relevant national laws, regulations and standards. All hazardous wastes, such as heavy residue, distillation residue, waste resin catalyst and waste adsorbent, are handed over to Waste Disposal Co., Ltd. for incineration or safe landfill disposal, and special examination and approval procedures have been handled in xx Environmental Protection Bureau and xx Environmental Protection Bureau, and the system of joint single and joint transfer has been strictly implemented; The collection and storage of the company's hazardous wastes shall be carried out in accordance with the requirements of the national pollution control standards for hazardous waste storage to prevent pollution caused by loss. The wastewater was discharged up to the standard, and there was no violation for 20xx years.
Seven, actively carry out the enterprise pollution source survey.
In order to actively respond to the call of government departments, do a good job of cooperation, and at the same time fully grasp the company's quantity, emissions, emissions destination, operation status of pollution control facilities and pollution control level. According to the unified deployment of the Municipal Bureau, the company's pollution source census statistics team will make statistics, review, register and report all the data of the company's production and related departments, provide a basis for the company's environmental quality improvement, and complete the pollution source census data reporting work required by the Municipal Bureau on time and with good quality.
Eight, attach great importance to pollution reduction.
In accordance with the overall deployment and requirements of the government and the Group on pollution reduction, the company re-established a leading group on pollution reduction, strengthened leadership, timely conveyed the requirements of superiors, made careful arrangements, refined objectives, vigorously publicized, paid attention to supervision, enhanced effectiveness, held regular special work meetings on pollution reduction, and comprehensively deployed and implemented various pollutant reduction work. The company achieved certain results in emission reduction, with the wastewater discharge per ton of products decreased by 65,438+00% and COD discharge decreased by 65,438+.
Summary of Safety Production Management in Chemical Plant In May of xx, xx Company conducted a parking inspection and maintenance for some equipment for xx days. The leaders at all levels of the inspection and maintenance company attached great importance to it, carefully planned and organized it, and formulated a scientific and detailed inspection and maintenance plan. Under the command and supervision of leaders at all levels of the company and the active cooperation of contractors, the contractors who participated in the inspection and maintenance work successfully completed the scheduled inspection and maintenance work according to the inspection and maintenance plan, and achieved the expected inspection and maintenance effect. Our company xx summarized the following inspection and maintenance work:
First, the work review.
In this overhaul, it mainly undertakes the heat preservation, disassembly and reset of more than xx inspection and maintenance tasks of MMA, MTBE and TO devices. One month before the start of the overhaul, we began to make active preparations, trained personnel in various aspects such as entering the factory and safety technology, and distributed personal protective equipment to each employee, so that every employee who participated in the inspection met the due quality and requirements. Conduct statistical inspection on the equipment and tools used for maintenance. Those that can be maintained shall be resolutely scrapped, and those that need to be purchased shall be purchased according to the work tasks. The materials required for maintenance are purchased by the manufacturers and brands designated by the company and reserved in advance. Before maintenance, actively communicate with on-site maintenance engineers, technicians, equipment supervisors and on-site operators, confirm each work task one by one on site, be familiar with the specific location of each work task, understand the time schedule and technical requirements of each work task, and make full preparations before maintenance.
In the process of maintenance, all inspection personnel insist on holding a safety morning meeting every day to timely and accurately understand the daily work content and matters needing attention. Our site supervisor arranges personnel reasonably according to the maintenance plan and specific work conditions every day, and all work tasks are carried out step by step. In the process of operation, every employee can strictly abide by the company's rules and regulations, strictly abide by the company's safety production management regulations, carry out civilized construction in strict accordance with the company's operation procedures and requirements, and successfully complete the work tasks. During the whole maintenance process, the normal development of other work was not affected because our work was not in place. While completing the task, do not forget the safety of equipment and the protection of materials. We will cover the removed thermal insulation materials and materials with rain-proof cloth and put them into plastic bags for protection. All materials are packed neatly, protected in place, and clean and thorough. It has not caused any waste and environmental impact to the company.
In the process of maintenance, heat preservation and reset, the quality is strictly controlled, and each work is constructed in accordance with the technological process and technical requirements. Never waste the available materials, ask for instructions for the materials that need to be replaced, and then replace them after being confirmed by the site supervisor, and repair the damaged materials, so as to improve and improve the thermal insulation effect of the materials, thus ensuring the construction quality and thermal insulation effect. In the final heat preservation and overall reassembly, all the staff gave full play to the characteristics of being able to bear hardships, attack hard and have a strong sense of responsibility, overcame the difficulties of short time and heavy workload, worked overtime for reassembly, and completed the work task on time with the cooperation of everyone's Qi Xin, doing their part for the smooth start-up and resumption of production of the device.
Second, there is a problem.
Although our employees can abide by the company's regulations in their work and complete their work well, there are also some minor problems in their work. Some employees do not pay enough attention to their own protection in order to facilitate their work. For example, some employees do not wear masks and dust-proof clothes according to the requirements of working tickets during the heat preservation process, and individual team leaders fail to make detailed safety technical disclosure to employees before the operation.
Third, the next step.
In the future work, we will, as always, do our job well, constantly organize employees to carry out training and study, overcome the problems existing in previous work, further improve the safety awareness of employees, continuously improve the technical level, comprehensively improve the overall quality, complete future work with higher standards and requirements, actively prepare for the next overhaul, and strive for better results in the next overhaul.
Summary of safety production management in chemical plants June 1 1, this is a different day. Since then, I officially entered the polymerization and drying branch of Tianchen Chemical Plant of Tianye Group and began to become a real industrial worker. Everything here is so curious and fresh to me who has just left school and is not deeply involved in the world. Now half a year has passed, and I have become a full-time employee here, making my modest contribution to the normal operation of production. Let's sum up our work in the past six months and plan our work for next year.
First, study.
It's completely different from school here. When we were students, we could have some knowledge, but it was definitely not here. The main purpose of school study is to cope with exams. You may not understand it very well, but you must remember it, because you have to fill it in the test paper to get the score. Here, you must reach 100% understanding. Any problematic operation is related to production, safety and even life, and there must be no mistakes. The study period of students is three months, during which I learned a lot. Under the guidance and guidance of the master, I learned a lot of new things, including theoretical knowledge, technological process and the use and working principle of equipment, which made up for my little knowledge at school. The most important thing is to give me a lot of knowledge that I can't learn in school-practical operation, which is my greatest gain. I learned the working principles of various valves, different types of centrifugal pumps and water ring compressors, as well as on-site and remote pressure gauges, liquid levels and thermometers. It is precious to know the key equipment and inspection precautions of the compression post.
Safety concerns the lives and property of oneself and others. Safety knowledge is like a dose of soup, and treatment and prevention are the most important. I learned the three no injuries, no equipment maintenance, no hot work, and use personal safety protection equipment.
At the same time, I also understand a truth-"there are mountains outside the mountains, and there are people outside the people", so I can't be satisfied with the status quo. I should always urge myself to work hard and keep learning new knowledge so that I won't rest on my laurels. Ask the masters more, their experience is the most valuable knowledge. This also helps to improve your ability, exercise your all-round ability and make yourself more confident.
Second, the work.
Only by working hard and not being lazy can we learn more and improve our experience accumulation. During more than half a year in the branch factory, I experienced two large-scale shutdowns, which is the best opportunity to understand the internal structure of the equipment. The first time, as a student, I was assigned to clean the workshop. Although I missed the opportunity to learn, I obeyed the arrangement and the command, and we accomplished the task well. The second time, as a compressor, I was responsible for adding blind plates to eliminate leakage with our class. During this period, I once again consolidated my understanding of screws and gaskets, and I was able to master the nominal diameter and pressure of cushions and the conversion of different units. At the same time, I know that the screws should be tightened evenly to ensure no leakage. Just to clean up the polymerization kettle, I also had a chance to go into the kettle and have a look. In a word, I learned a lot from this overhaul.
Third, the work plan for next year
I will meet the unknown challenges in the future with full work enthusiasm, and make plans for next year's work to make production more smooth.
Under the leadership of the monitor, make every effort to ensure the normal operation of the equipment in this position, without affecting production, and at the same time increase production within the permitted scope. In order to realize this plan, I will carefully check the observation equipment in the future work, so as to see, listen, touch and smell more effectively, find problems in time, deal with them as soon as possible, without delay or carelessness, and ask the master myself, which can't be solved by consulting experience. Better cooperate with the central control, increase output within the allowable range, and produce safely and stably. At the same time, keep learning, improve your job knowledge, study hard for new jobs, and achieve "three good things at a time".
Fourth, the final summary
Habits are always formed inadvertently, and habits will not disappear inadvertently. When loneliness becomes a habit, we will face that little light in the dark and go all the way; When kindness becomes a habit, we will feel that the world is really full of love. Be serious
Work becomes a habit, and we can finish our work and production better.
Summary of Safety Production Management in Chemical Plant The first quarter of 20xx has passed, and through the efforts of all the staff in the workshop in these three months, some gains have been made. I think it is necessary to make a summary of this year's work. The purpose is to learn lessons and improve working ability, so as to do the workshop work better. Our workshop is confident and determined to do a better job in the next quarter. The following is a brief summary of this quarter's work.
First, improve system construction and consolidate basic management.
Workshop organizers have formulated various management systems of the workshop, taking the establishment of the standard system as an opportunity, and according to the provisions and requirements of factory-level documents, they have carefully combed and further improved the management systems formulated by the workshop, and formulated the workshop management system. On this basis, we assisted the factory to complete the revision of the workshop emergency plan and operating procedures, defined the requirements and responsibilities of each post, and improved the management organization system at all levels and the management rules and regulations of each work. By improving the scientific, comprehensive and standardized management system, all the work in the workshop is on the right track and the comprehensive management level of the workshop is obviously improved.
Second, strengthen education and training to improve the overall quality of employees.
In the first half of the year, the workshop worked under a brand-new organizational structure, which put forward higher requirements for safety education and business training in the workshop. According to the requirements, the workshop has made an annual training plan, covering all aspects of workshop safety production, equipment maintenance and production technology. Combined with the actual workshop, according to the workshop plan, organized and step by step to carry out workshop training. Use two class hours each week to conduct safety and technical training respectively.
Third, the equipment work
1, and further improve employees' skills in various ways;
2. Continue to complete equipment renewal, technical transformation and overhaul.
3. In the process of maintenance, gradually improve the problems in production and do a good job of maintenance in the next quarter. Try to improve the equipment that has problems in production.
Fourth, the work objectives
While earnestly completing the tasks assigned by the factory, we should do a good job in the workshop, do a good job in training, improve the professional level and working ability of employees, and really improve the overall quality of the whole workshop. Complete summer maintenance work with good quality and quantity.