1. Designer 1) Graduates majoring in interior decoration design or interior decoration design. 2) Have many years of practical experience in decoration design. 3) Independently undertaken large-scale interior decoration engineering design work with certain technical difficulties. 4) Have certain organization, management and coordination ability. 5) Have a certain writing skills. 6) Have a sense of responsibility and responsibility. 7) The design ideas are active and agile, with innovative consciousness. 8) Have coordination and practical experience in the construction site.
2. The project manager (1) has the ability to be fully responsible for site management in the process of project construction, the ability to coordinate internal and external relations, and earnestly perform the project contract. 2) Be familiar with the company's quality system documents, and pay special attention to the organization and management of the construction site and the implementation of national and local standards and specifications. 3) by the provincial and municipal construction bureau project manager training project manager qualification certificate, and according to the "construction enterprise project manager qualification management measures" (document number. The Ministry of construction19951[1995]1No.
3. 1), technical director of the project department, familiar with national laws and regulations on decoration and relevant provisions of provinces and cities. 2) Be able to independently organize the decoration engineering construction organization design, the preparation and implementation of the construction scheme, and have the ability to deal with general technical problems. 3) Have the ability to organize and implement the blue prints.the design. Familiar with construction safety, technical disclosure, operating procedures, construction acceptance specifications and quality requirements and can organize their implementation. Be able to formulate key working procedures, construction methods and technical measures in the process of decoration engineering construction, and be familiar with the general performance and management of mechanical equipment. 4) Have a certain understanding of the use and management of measuring instruments. 5) Be able to independently preside over the on-site engineering meeting, assist in solving the problems raised in the decoration process of various professions, and independently handle the general quality and safety accidents of the project. 6) Be able to undertake the responsibility of reviewing the technical verification list and design changes, and check and supervise the project progress.
4. The person in charge of the project construction 1) is familiar with national decoration laws and regulations and relevant regulations of provinces and cities. 2) Should have the qualification of the builder (or safety officer), be able to independently prepare safety disclosure, safety technical scheme and safety measures, and manage the project safety production and civilized construction according to the construction safety inspection standards. 3) Have the ability to start the project and organize the construction, sign and draft the construction period, adjust the construction strength in time according to different construction conditions, and complete the contract construction period. 4) Be able to independently preside over on-site engineering and safety meetings, assist in solving problems raised in the construction of various disciplines, and independently handle general safety and quality accidents in decoration engineering.
5. The builder 1) should be familiar with the relevant national decoration construction specifications and fully grasp the management regulations on safety, technology and quality formulated by the company. 2) Should have the ability to organize on-site construction and reasonably arrange working procedures. 3) Should master the ability to deal with general technical problems, and formulate technical measures to ensure construction safety, quality and time limit according to the situation of the construction site and supervise the implementation. 4) The builder shall participate in the training of relevant departments before taking up his post, and obtain the construction permit after passing the examination.
6. Material engineer 1) should master the relevant regulations of material management and be familiar with the processes of material entry, transportation, stacking and use. 2) Master the correct storage methods of various materials and identify the stacked materials correctly and clearly. 3) Should have the ability to judge whether ordinary materials are qualified according to the appearance quality. Familiar with the quality inspection and evaluation standards of various materials. 4) Be familiar with the performance and market price of decorative materials and make a correct evaluation. 5) Material engineers should take part in the training organized by relevant departments before taking up their posts, and pass the examination to obtain the certificate of material engineers.
7. Quality engineer 1) should be familiar with basic knowledge such as national decoration quality standards. 2) Should master the use of decoration quality inspection tools. And can carry out quality inspection according to the specifications. 3) Check data and evaluate quality according to specifications.
[1][2] Next page
More excellent products come from resumes.
More excellent products come from the ability of resume level. 4) Be familiar with the company's relevant safety management regulations, define responsibilities and have the ability to perform their duties. Be able to put forward preventive measures, hidden dangers rectification scheme and related safety technical measures according to the safety situation of the construction site. 5) Have the ability to organize safety production and handle safety accidents and potential safety hazards. 6) Be able to participate in formulating measures to prevent casualties, fire accidents and occupational hazards; Be able to participate in the formulation of operation procedures for dangerous posts and dangerous equipment in this enterprise and have the ability to supervise the implementation. 7) Have the ability to deal with hidden dangers of accidents in time, actively organize on-site rescue, participate in accident investigation and independently put forward opinions on problem handling. 8) Full-time quality assurance personnel shall obtain the post qualification specified by the local management department. Full-time quality assurance personnel on the construction site should be trained by relevant departments.
8. Documentary 1) Be familiar with the archives law, secrecy law and relevant regulations on technical archives management of decoration construction enterprises, and manage archives independently. 2) Be familiar with technical data management business, and have the ability to manage, send and receive, log in, classify, file and maintain engineering technical documents. 3) Be familiar with important construction basis such as standards, specifications, laws and regulations, collect and sort out knowledge, and provide timely and accurate information and basis for the construction technology management of this unit. 4) The full-time (part-time) librarians of the project department should be familiar with the laws and regulations promulgated by the local administrative department and provide services for the construction projects of the project department according to relevant requirements.
9. The keeper 1) is familiar with the performance and storage knowledge of various materials. 2) Master the material acceptance specification and the material warehousing inspection procedures. 3) Understand the common knowledge of keeping common machines and tools.
10. Measurement administrator 1) Master the preparation method of the annual work plan for measurement management of this unit. 2) Understand the performance, specifications, testing period and comparison method of commonly used measuring instruments. 3) Should master the basic knowledge of keeping, borrowing, renting, periodic inspection, sampling and comparison of measuring instruments.
1 1. Woodworking 1) Understand the decoration construction drawings, cut and make templates according to the drawings, and calculate the engineering quantity according to the drawings. 2) Be familiar with the basic knowledge and operating procedures of woodworking operation, and master the knowledge of the use and maintenance of common tools and machinery. Will level the line with a spirit level, a steel rule and a line hammer. 3) Be familiar with the construction specifications and related requirements of this type of work, and carry out the construction according to the specifications and related requirements. 4) Be familiar with the basic skills of this type of work, such as making wooden doors and windows, wooden floors, ordinary wood decoration, installing aluminum alloy doors and windows, wood decoration, furniture, etc. 5) Be familiar with relevant quality evaluation standards, and be able to conduct self-inspection, mutual inspection and handover inspection according to the evaluation standards.
12. Painter 1) Master operation procedures, quality standards, basic treatment technology, painting technology, tool use and finished product protection. 2) Understand the types, performance and quality requirements of coatings, as well as the performance and quality standards of various diluents, blending agents, fillers, curing agents and other materials used to prepare coatings. 3) Be able to master the basic skills of this type of work, such as: color mixing and color-clearing paint construction of wooden doors and windows, wooden walls and floors, other metal surfaces and plastering surfaces (including basic treatment, surface treatment,; Paint modulation and color matching, junior workers should be able to modulate general mixed color and clear color paints, and intermediate workers should be able to modulate and color all kinds of advanced decorative paints; Wallpaper and wall covering pasting (including basic treatment, cutting and pasting, etc.). ); Ordinary glass cutting installation gluing, glass cutting, etc. 4) Self-inspection, mutual inspection and handover inspection can be carried out in the construction process according to the quality evaluation standard.
13. Plaster workers 1) Understand the decoration engineering drawings, calculate the quantity according to the drawings, construct according to the drawings, and construct according to the specifications. 2) Master the common knowledge of common decorative materials and common decorative operation procedures. Master the use of level, line hammer, guiding rule, wooden board and related tools, and the production and use of special tools. 3) Proficient in various skills of this type of work, such as: wall plastering, hanging lines, pasting cakes, punching holes, dividing frames and marking lines; Ordinary plastering work for walls, ceilings, dados, floors and outdoors; Wipe all kinds of internal and external decorative line angles (waist line, cornice, beam, column, yin and yang angle line,; Terrazzo floor, ceramic tile rolling coating, spraying, bullet coating, artificial stone operation; Walls, floors, squares, columns, piles, caps, etc. It is inlaid with various tiles, mosaics, natural and artificial slates. 4) Conduct process self-inspection, mutual inspection and handover inspection according to construction specifications and quality evaluation standards. Note: ① Electrician, welder, etc. Obtain a nationally recognized employment certificate in accordance with state regulations. (2) Gluers and other special machinery and special process operators shall be trained in process operation according to relevant requirements before taking up their posts.
Previous page [1][2]
More excellent products come from resumes.
For more information about project/service/procurement bidding, and to improve the winning rate, please click on the bottom of official website Customer Service for free consultation:/#/? source=bdzd