The method of making a photo into a poster with ps is as follows:
First, open a photo material that needs to be converted into a poster effect, execute CTRL+ALT+~ to bring up the highlighted selection area, then perform reverse selection, execute CTRL+J to copy the content of the selection area, and set the blending mode of the copied layer to color filtering.
Second, in order to further highlight this photo, we will copy the layer copied in the previous step.
3. Create a new layer, execute CTRL+ALT+SHIFT+E to stamp the visible layer, then add a mask to the stamped layer, then hide the layer 1 and copy the layer, and then use the black brush tool to smear people and the sky in layer mask.
4. Click the "New Fill or Adjust Layer" button at the bottom of the layer panel, and choose to create a color balance adjustment layer, with the middle tone set to -29, 0,-19; Then use the black brush tool to smear the ground where the characters stand on the mask.
5. Then create a hue/saturation adjustment layer and set the parameters to -28, -23 and 0 in the blue state. Used to change the color of the sky, because the color saturation of the sky is high
Sixth, create a curve adjustment layer to brighten the picture of the photo, and then use the black brush tool to smear the people and photos around the mask to form a dark corner effect.
7. Create a new layer, stamp it, perform filter-rendering-lighting effect, and then Wang Jie layer mask, use the black brush tool to smear the areas that don't need lighting effect.
Eight, create a new layer, set the mode of this layer to positive superposition, then pull out a radial gradient, add a mask, and use the black brush tool to smear out the places that don't need to be clear.
9. Copy the layer created in step 8 to enhance the dark corners.
X create a brightness/contrast adjustment layer with brightness of-14 and contrast of +5.
1 1. Create a new layer and stamp it, sharpen the image with the plug-in filter Topaz, and then blur the sky with the blur tool. Reduce the highlight and sky noise of the picture.
12. Create a new layer and stamp it, perform image-adjustment-automatic coloring, and then edit-fade in and out.
13. Create a tone adjustment layer to further enhance the contrast. The input tone is 25,1.25,250. Continue to strengthen the picture contrast effect.
Finally, you only need to type the required words in the correct position of the photo, and a beautiful poster is formed. . .
How to design a poster with a computer 1: How to make a poster with a computer can be realized with ps. Maybe I can help you. Hi, my second question: how to make a poster with a computer? What you need to use is the PUBLISHER software that comes with the complete installation of your office, or the professional plate-making software. I hope I can solve your problem. 1, before using the material, we must first make a simple material effect, and then we will need it to add effects to the material. Create a new blank document with 800×600 pixels, and press "D" to set the foreground color/background color as the default black and white. Create a new layer and use the filter >; Rendering > clouds. Then use the filter >; Noise > add noise according to the following settings: quantity 50%, average distribution, and monochrome. After applying the effect of adding noise, use the filter >; Artistic effect > dry brush, set as follows: brush size 2, brush detail 8, texture 1. Add noise again according to the previous settings (quantity 50%, average distribution, monochrome). Then go to filter >; Artistic effect > painting daub, set as follows: brush size 7, sharpening degree 9, brush type: simple. 2. Now use Filter > Brush Stroke > Splash, and the settings are as follows: spray color radius 20, smoothness 5. After that, you should get the effect as shown below. 3. use select > color range, select "highlight" from the "select" drop-down menu, and then click ok, so that you will see the highlight area selected. We need to press the DELETE key on the keyboard to delete the selected content, and then delete the background layer, so as to get the required material. Save it. You'll need it later. 4. Next, you need to cut the material picture and save it. You can use the pen tool for matting. If it is difficult for you to dig out some complicated details (such as hair bundles), please refer to the methods introduced in this article. The girl selected in the tutorial has flying hair. If you want to dig out these details better, you can use the channel method to dig out the picture. Switch to the channel panel to see which channel has higher contrast between people and background. Here, the author chooses the green channel to copy once, and then clicks the newly copied channel. Question 3: How to make poster printing by computer is a problem, but the most important thing is how big is your picture? For example, the wallpaper with a resolution of 72 on the computer desktop 1024*768 is actually printed to be about 8.6cm*6.5cm. If you want to print, you must ensure that the size of the picture is the original size in the state of resolution law 300. I don't think there are many original-sized pictures that big in the average person's computer. If it is a poster, as long as it is clear under 66% display, you can resize the picture in photoshop, and then process it, such as adjusting the color scale and saturation. If the picture is too small and there is noise after enlargement, you should use the blur tool to remove the noise. If the picture is too small and there are many mosaics after enlargement, then give up the picture ~ you can make it in word or download PS online. Question 4: How do computers make posters? Ps Question 5: What software can be used to design posters with computers? Photoshop&CorelDRAW Question 6: How to make posters with computers? It depends on what kind of poster you make. You can use OFFICE software for simplicity and professional software such as PS for complexity. Question 7: Excuse me, the picture is designed on the computer, and then how to print out the poster or get it out like this picture? You need equipment to get it out. Need a large color printer. . . . . . That is, street advertisements. . The main size ratio when doing it. There is color difference! ! ! ! Hope to adopt! ! ! ! ! Question 8: Whether the poster is good for drawing or computer design is not so absolute, it depends on the purpose and the required style. However, there are many computer designs on the market now, but because of this, hand-drawing is more valuable. Question 9: How to take screenshots of computer posters? What poster is it? Is it a screenshot? Press PrintScreenSysRq on the keyboard to take a screenshot, and then paste it into the drawing program. Question 10: How to make a poster by computer? What you need to use is the PUBLISHER software that comes with the complete installation of your office, or the professional plate-making software. I hope I can solve your problem. 1, before using the material, we must first make a simple material effect, and then we will need it to add effects to the material. Create a new blank document with 800×600 pixels, and press "D" to set the foreground color/background color as the default black and white. Create a new layer and use the filter >; Rendering > clouds. Then use the filter >; Noise > add noise according to the following settings: quantity 50%, average distribution, and monochrome. After applying the effect of adding noise, use the filter >; Artistic effect > dry brush, set as follows: brush size 2, brush detail 8, texture 1. Add noise again according to the previous settings (quantity 50%, average distribution, monochrome). Then go to filter >; Artistic effect > painting daub, set as follows: brush size 7, sharpening degree 9, brush type: simple. 2. Now use Filter > Brush Stroke > Splash, and the settings are as follows: spray color radius 20, smoothness 5. After that, you should get the effect as shown below. 3. use select > color range, select "highlight" from the "select" drop-down menu, and then click ok, so that you will see the highlight area selected. We need to press the DELETE key on the keyboard to delete the selected content, and then delete the background layer, so as to get the required material. Save it. You'll need it later. 4. Next, you need to cut the material picture and save it. You can use the pen tool for matting. If it is difficult for you to dig out some complicated details (such as hair bundles), please refer to the methods introduced in this article. The girl selected in the tutorial has flying hair. If you want to dig out these details better, you can use the channel method to dig out the picture. Switch to the channel panel to see which channel has higher contrast between people and background. Here, the author chooses the green channel to copy once, and then clicks the newly copied channel. How to use photoshopcs5 (1) to make posters, run photoshopcs5, and choose any picture file. (2) Open the path palette, select a path and convert it into a selection. (3) Hide the path, open the "Channel" palette, create a new "Alpha 1" channel, and fill the selection with white. (4) Copy the "Alpha 1" channel, feather the selection, adjust the location of the selection and fill it with black. (5) Load the "Alpha 1 copy" channel selection, switch to the "Layers" palette to create a new layer and fill it with white. (6) Execute the "File" → "New" command to create a new file. (7) Execute the Filter → Rendering → Cloud command to save the document. (8) Switch to the Forbidden Kingdom document, copy the channel "Alpha 1", load the channel selection of "Alpha 1", and execute the filter → distortion → glass command. (9) Load the "Alpha 1 copy 2" channel selection, switch to the "Layers" palette to create a new layer and fill it with white. (10) Switch to the channel palette, select the channel "Alpha 1 Copy", copy it and reverse its color. (1 1) Execute the image → adjustment → color scale command. (12) Load the channel selection of "Alpha 1 Copy 3", switch to the layer panel to create a new layer and fill it with black. (1 1) Continue to draw the image with reference to the above production method. (12) Merge the created image into the layer in the Layers panel. (13) Create a gradient map adjustment layer in the Layers panel and set its parameter options. (14) Use the brush tool to smear the face area in the mask of the gradient map layer to reduce its brightness. (15) Use the Blur tool to partially blur the Layer 5 image. (16) Finally, the "Text" layer is displayed to complete the production of this example.