20 19 Personal Work Plan for the Second Half of Chemical Plant (I)
Although many things have happened in acetylene workshop, in retrospect, the overall safety and environmental protection work has been promoted and effective. In the second half of the year, I made the following plans:
1, continue to implement the company's various safety operation rules and regulations and operating procedures to ensure safe and stable production throughout the year without accidents.
This is not only a plan, but also the goal of our efforts. There can be no more accidents in the acetylene workshop. This is my opinion and my feeling. When we go outside, we feel stressed and unable to lift our heads. If we don't change and stop this sign, we are really ashamed of our leaders and employees, so we might as well go home and sell the red department.
2, efforts to do a good job in employee training and education.
Cooperate with professional workers, or urge professional workers to do a good job in the training and education of workshop employees, carefully organize, do not perfunctory, do not go through the motions, and conscientiously implement this work. At the same time, we should also change the phenomenon that we have finished training before, and let everyone write experiences and effect evaluations, so that we can improve the training methods and contents.
3. Further deepen equipment maintenance and lubrication management.
We intend to take the equipment regulations as the starting point, and put the responsibility of each equipment on people, not only for hygiene, but also for equipment maintenance and lubrication. At the same time, we also require the operators on duty to carefully check and test the equipment on their posts to ensure the first pass, which is tantamount to double management. If something goes wrong with a piece of equipment, it is the responsibility of two people, which is conducive to the improvement of management.
4, continue to do a good job of saving energy and reducing consumption and repairing the old and recycling waste.
In fact, our acetylene workshop still has a lot of potential to be tapped, a lot of work to be done, and many links to save energy and reduce consumption. For example, at present, the ash deduction stored in calcium carbide cars, the calcium carbide dust recovery project and the rough removal of iron chips on iron are all considerable quantities that can be recovered. Of course, this job is not easy and difficult. In addition, many valves and replacement spare parts can be repaired and reused, such as replacing elbow plate with coarse crusher, replacing guard plate and pump cover with large slag slurry, etc.
5. Improve the process and quality management system and strengthen the assessment.
On the original basis, continue to refine the process and quality management system, strengthen the assessment, stimulate everyone's enthusiasm for work, reward diligence and punish laziness, reward advanced and spur backward, and promote the improvement of the overall assessment level of the workshop.
6, continue to do a good job of civilized production on site.
7. Complete the objectives and tasks issued by the company and the branch factory, make plans according to the company's monthly plan and operating conditions, and cooperate with the branch factory to complete the production tasks.
8. Strive to complete the temporary tasks under the factory.
20 19 Personal Work Plan for the Second Half of Chemical Plant (2)
First, clear objectives and implement the main responsibility.
(1) In the second half of the year, safety work was carried out closely around the factory safety production policy of "safety first, prevention first and comprehensive management", and the idea of "responsibility is more important than Mount Tai" was firmly established among all employees. According to the spirit of 20 19 safety and environmental protection work conference of the group company, the safety and environmental protection work conference of the whole plant should be held in time at the beginning of the year. According to the organization of the factory, adjust the safety production committee, fire safety committee, traffic safety committee and the leading group for comprehensive management of social security, and implement the safety leaders of all units and safety officers at all levels.
(2) Earnestly implement the new Law on Work Safety, the Law on Environmental Protection and the Law on Prevention and Control of Air Pollution, implement the target responsibility system management of enterprise safety and environmental protection, and sign the responsibility book for work safety with all departments, factories and employees of the enterprise at the same time when holding the work meeting on safety and environmental protection, so that the responsibility for work safety can be truly implemented for every employee, especially the front-line production and safety management personnel, and create an enterprise safety culture atmosphere in which all employees participate in safety management.
(3) Formulate and improve the factory safety production management system, and complete the revision of the Hidden Danger Investigation Responsibility Management System and other related systems by the end of the year as planned. According to national and local laws and regulations and the requirements of enterprise production and operation, formulate and revise the safety and environmental protection management system in a timely manner throughout the year. Through the implementation of the whole production responsibility investigation and assessment mechanism, we will strengthen the assessment and rewards and punishments of the annual safety production target responsibility system, strengthen inspection and supervision, and continuously enhance the safety awareness of employees.
Second, strengthen safety and environmental protection training and education, and build enterprise safety culture.
By strengthening the basic role of safety education in safety management, we will carry out safety publicity training and safety activities on various topics, continuously improve the safety awareness and overall safety quality of all employees, and vigorously cultivate a team of employees with strong safety awareness, rigorous style and skilled safety skills.
(1) Organize study, publicity and safety training activities on various topics.
1 Prepare the factory safety training plan and safety activity plan before the end of the month, carry out extensive publicity and training on safety and environmental protection management system, safety production knowledge and skills, enhance employees' safety awareness and safety self-protection ability, and actively carry out publicity, education and assessment on "Safety Production Month" and "1 19" activities. Improve the establishment of safety, environmental protection and occupational health publicity columns in the factory, and highlight the characteristics of enterprises.
Through the development of the above activities, we will create a safe production atmosphere for enterprises, make the employees actively participate, and popularize and improve the awareness of safe production, self-protection and emergency handling ability in the activities.
(2) Strengthen legal education and improve the law-abiding awareness of all employees.
Conscientiously publicize and implement the laws, regulations and policies of the state and governments at all levels on safety and environmental protection, and hold various types and different levels of laws and regulations training activities throughout the year. The focus of the annual plan is to continue to deepen the understanding of legal knowledge such as the Law on Safety in Production, the Law on Environmental Protection, the Law on Prevention of Occupational Diseases and the Law on Prevention of Air Pollution, and to implement legal education to all departments and employees of the enterprise.
(3) Carry out basic safety training.
Strengthen the safety technical training of employees, and continue to carry out basic safety training and education for employees, focusing on the process operation procedures, safety operation procedures and emergency plans of the factory, and combining the safety requirements of different posts, from problem setting, training to assessment, so as to improve the pertinence of learning. Ensure the qualification rate of pre-job training for new employees and re-employed workers, and the certificate-holding rate of safety management personnel and special types of work. Strengthen the drill of factory emergency plan, and conduct a special emergency drill in the first half of the year, requiring all employees to participate in the drill of factory-level safety accident emergency plan, and all departments to carry out departmental drills to really familiarize employees with emergency knowledge.
Three, strengthen safety inspection, establish and improve the enterprise hidden danger management system.
Make a monthly safety inspection plan, deepen safety management, strengthen safety inspection, find hidden dangers, make timely rectification, and improve the safety awareness of cadres and workers.
(1) According to the requirements of different seasons, major events and holidays, give full play to the role of safety management personnel at all levels and carry out different forms of safety, environmental protection, fire protection, occupational health and public security inspections. The team of the branch shall conduct daily inspections, and the management department shall conduct key inspections and special safety inspections. Workplaces and storage and transportation facilities involving inflammable, explosive, toxic and harmful substances shall be inspected in strict accordance with national laws, regulations and standards. Do the combination of daily inspection and special inspection, comprehensive inspection and key inspection.
(2) Strengthen environmental inspection and monitoring to ensure the stable discharge of pollutants up to standard.
Incorporate environmental safety inspection into the overall safety inspection of the factory, establish a special environmental inspection mechanism, and carry out environmental safety inspection based on the national environmental protection regulations and various environmental management systems of the factory, focusing on wastewater, waste gas treatment and discharge, and hazardous waste storage and disposal. According to the factory environmental protection index management plan, the factory performance monitoring and measurement control program will assess the index completion every quarter. As our unit is listed as a key pollutant discharge enterprise, according to the requirements of the Municipal Regulations on the Prevention and Control of Air Pollution and the work instructions of the Environmental Protection Bureau, our unit will carry out self-monitoring and information disclosure on a quarterly basis on 20 16, and disclose the monitoring results of pollutant discharge and other information.
⑶ Establish and improve the system of enterprise hidden danger investigation and management.
In order to ensure the smooth progress of various production and business activities of enterprises, continuously improve the safe production environment and prevent all kinds of accidents, the operation mechanism, governance mechanism, accident hidden danger monitoring and prevention mechanism of enterprises are improved through the activities of building hidden danger investigation system. Finally, an enterprise hidden danger investigation and management system with "clear responsibilities, sound mechanism, clear standards, full participation, strong guarantee and efficient operation" was established to realize the essential improvement of enterprise safety management ability. While improving the hidden danger investigation and management mechanism, we constantly make use of the annual factory-wide safety work conferences at all levels, and publicize the significance and importance of establishing a factory-wide accident hidden danger investigation system, as well as the establishment methods and operation mechanism, through various forms such as safety activities and safety training, so as to lay the foundation for the enterprise system construction and stable operation. According to the construction plan of hidden danger investigation and management system, a production unit will be identified in the whole plant to carry out the pilot work of hidden danger investigation system in 2020, and the contents of hidden danger investigation system will be further improved through trial operation, laying a good foundation for the whole plant to implement this task in 20 19.
Cashier's work summary 3? Yesterday passed quickly. Today, let's review and summarize our past work. Look at the gains and losses in the work and lay a good foundation for better achievements and breakthroughs in the future work. ? Let me talk about the summary of the work in the first half of the year from two aspects. On the one hand, let's talk about what we have done well: first, the improvement of work enthusiasm and work efficiency? People attend classes every day, so how to keep a good working condition at work is particularly important. Create a good working atmosphere, green bonsai, warm tips. If colleagues at work maintain a good working mood during working hours and put themselves into their work with a proactive attitude, they will certainly get twice the result with half the effort. Because there is a clear division of responsibilities, responsibilities are in place, rewards and punishments are also clear, and we will make timely adjustments to each division of work in our work, and use the most suitable candidates to carry out the most suitable work. At the same time, we have established a student duty system, and there will be a special person in charge of special work every day. Thankfully, our team members will help each other and finish the finishing work every day. Over the past six months, our work mistakes have been significantly reduced, and the error rate has been reduced. ? Second, the learning atmosphere and the progress of work and business skills? To do a good job, we must have solid work skills and business knowledge. In our spare time, we will learn from each other, ask each other questions, and hand out our own papers for assessment. Those who do the worst in the exam should also be treated, and learning and entertainment should be integrated. In the first half of the year, the store arranged rotation and the integration of fresh blood, which just gave us an opportunity to learn and make progress. Whether it's rotating colleagues or new employees, we all implement class teaching and learn from each other, and both new and old employees have training plans. I will review it again, but I haven't mastered it in time. One excellent person does not mean that the whole team is good, but it is good for everyone to make progress. We also proved that our efforts were not in vain with our achievements. ? Third, service enthusiasm? Service is the ultimate goal of our work. Satisfying customers is the best recognition of our work. There used to be customers who suspected that our cashier didn't wear makeup, but now, no! A long time ago, they all kept good makeup. Excellent, and her progress is obvious to all. There is also Gao Yijing, who has won the "service star" of the store for many times. This time, the store used the service evaluation system, which also made our service by going up one flight of stairs. We don't care much about the results, but this invisibly gives us a kind of work pressure and requires us to serve every customer well, whether familiar or unfamiliar. ? In addition, we also have our service tips, that is, using a short turn to ensure continuous service enthusiasm. ? Some did well, others did badly. While summing up what I did well, I also talked about what I did badly: 1. As a team leader, I didn't have enough supervision, especially my own requirements were not strict enough, and I didn't check the computer entry of the income summary table carefully enough, which led to unnecessary mistakes. Especially in May-June, there were 6 mistakes, which were relatively frequent. Secondly, in the last two months of work, there have been three cases in which cash and credit cards are out of balance. In this regard, we have also taken corresponding measures, and similar mistakes have occurred again. As the shift leader, we have the responsibility to double the penalty points and register them on our work assessment form. There are also unnecessary mistakes in the work, which have not caused losses, but have brought inconvenience to other groups and increased the workload. It is necessary to express our deep apologies to them here. We promise to put an end to this situation in our future work. ? Secondly, in the process of training employees in rotation, we neglected to follow the company's operating instructions, but summarized them according to our usual work experience and adopted a "spoon-feeding" method. These mistakes were exposed in later tests. Fortunately, under Chen's guidance, correct it in time, and strictly follow the operating rules in the training of new employees, step by step, step by step. ? Besides, we haven't done enough in some details. These are clear at a glance in the investigation of mysterious customers, such as not handing orders with both hands during the service, not apologizing when leaving halfway, and not thanking when leaving. Here, we also communicate with each other, raise awareness in this regard, and play the role of mutual supervision and mutual reminder, so as to work together. ? Generally speaking, there have been achievements and mistakes in our work in the past six months. We will continue to do well and try our best to improve our shortcomings. At the same time, I hope to get the support of all my colleagues. 20 19 Personal Work Plan for the Second Half of Chemical Plant (IV)
I. Guiding ideology
Adhere to the policy of safety first, prevention first and comprehensive treatment, conscientiously implement the national laws and regulations on production safety, the Notice on Printing and Distributing the Key Points of Safety and Environmental Protection Work in 20 19 and the relevant safety regulations at higher levels, strengthen supervision, deepen rectification, lay a solid foundation, refine responsibilities and strictly implement them. Promote the legalization, standardization, standardization and systematization of safety production, further improve the occupational health and safety management system, continuously improve the intrinsic safety level of enterprises, establish a long-term mechanism for safety production, and ensure the long-term safe operation of enterprises.
Second, control the target.
No work-related injuries and deaths;
No major leakage or poisoning accident;
No major fire or explosion accidents;
No major special equipment accidents;
No major traffic accidents or public safety accidents;
No serious injury accident;
Direct economic losses caused by general accidents? 40 yuan/current price of ten thousand yuan output value;
The rate of minor injuries per thousand people is controlled at 0.5? Below the monthly average.
Third, the main points of work
(a) to promote safe production through technological progress, implement the safety configuration transformation of devices and processes, and improve the intrinsic safety level.
1. Further improve the evaluation mechanism of safety and extreme operation of process measures, start with dangerous operation, do a good job of smooth operation, gradually establish the concept of balanced operation of the system, and improve the system.
2. Continue to explore the systematic improvement of chemical reaction mode, actively promote the research and development and application of new catalysts, improve the safety of chemical reaction, optimize the process flow, reduce the risk factors in the production process, and continuously improve the intrinsic safety level.
3. Do a good job in the safety "three simultaneities" of aniline, polycarbonate and other construction projects, explore the application of new processes and technologies, and ensure the safety of project construction and operation.
4. Continue to deepen the goal of eliminating hazard sources and combine circular economy and energy-saving operation with safe operation. Through process innovation, the hazards can be eliminated or reduced as much as possible, and the integrated linkage of exothermic process and heat utilization process in chemical process can be realized, so as to recover chemical reaction heat and process waste heat, improve the heat exchange network of the whole plant, and further optimize the cascade utilization of heat.
5. The equipment management department shall inspect special equipment such as boilers, pressure vessels, pressure pipes and lifting machinery. Inspect the enterprise and its safety accessories on schedule, and make inspection and test records. If any defective equipment is found, it should be stopped in time or degraded for monitoring and use, and the corresponding equipment or pipeline should be replaced in a planned way.
6, continue to pay special attention to the management of dangerous chemicals. Further improve the monitoring measures for major hazard sources, and add eye-catching safety signs in major hazard sources and key parts. Strengthen the road improvement in the factory area to ensure the transportation safety of dangerous chemicals.
7. Strengthen the perfection and standardized management of on-site cofferdams, and strengthen the daily maintenance and management of inert gas protection devices.
(two) to promote safety standardization, improve the safety organization and management system, implement safety responsibilities, strengthen safety management, and ensure effective implementation.
1, further improve the management of target responsibility system for production safety and the risk bonus system. Further refine the safety target assessment methods into economic responsibility system, risk bonus and ankang cup assessment methods, and sign safety target responsibility letters at different levels, which will be implemented in every post and everyone.
2. Implement whole-process risk management. Improve the risk assessment organization, strengthen the identification of risk factors and risk assessment of business activities, effectively implement various risk control measures, formulate risk reduction plans for major risks and improve the implementation process to ensure that the risks of business activities are within acceptable limits. Organize the review of the occupational health and safety management system, realize the management commitment, and keep the system consistent and effective.
3. Seriously carry out safety standardization work, and improve various safety management systems and record books of enterprises in accordance with the Code for Safety Standardization of Hazardous Chemicals Business Units. All units should complete and improve all the work on time according to the requirements of the specification and the document Chongchangfeng [2006] 104 of the Safety Standardization Work Rectification Plan, and strive to meet the standards for acceptance in the first quarter.
4. Seriously implement the enterprise hazardous chemicals safety management system, and effectively strengthen the safety management of all aspects of the production, operation, storage, use, transportation and disposal of waste hazardous chemicals. Further improve the long-term mechanism for the safety management of hazardous chemicals.
5. Strictly implement the management system of major hazard sources in enterprises, and strengthen various monitoring measures to ensure the safe and smooth operation of major hazard sources. Continue to carry out the work of eliminating dangerous sources.
6. Strictly implement the enterprise's "safe production responsibility system", implement safety responsibilities, ensure necessary safety investment, and conscientiously implement organizational measures, management measures and technical measures.
7. Strengthen on-site safety management, pay special attention to the management of dangerous operations, and strictly examine and approve procedures. The leaders of the operation unit and relevant management departments should strengthen the monitoring of the operation process and intensify the monitoring. During holidays and special periods, the leaders of the operation unit must stick to the site to ensure the safety of operation.
8. Arrange the work reasonably, strengthen coordination and communication, and do a good job in the management of cross-regional operations, crossover operations and work change periods.
9. Strictly implement the system of leaving the factory for employees at all levels of the enterprise, and strengthen maintenance management. In principle, no maintenance will be arranged for middle and night shifts. Under special circumstances, if safety maintenance is involved, it is necessary to be present at six: the section chief, workshop safety officer, workshop leader, technical safety department leader, equipment department leader, and assistant to the deputy director of production to organize, coordinate and direct the maintenance work at the site. In case of emergency, the duty leader of the maintenance unit should take temporary measures in time, and immediately notify the relevant functional departments to be present to determine the maintenance plan.
10, organize comprehensive, professional, holiday and other safety inspection activities in strict accordance with the enterprise's Safety Inspection and Hidden Danger Rectification System, and make timely rectification when hidden dangers are found. All units should complete the hidden danger projects issued by the factory department on time, and report the hidden danger rectification in writing to the factory safety supervision department for the record, which will be included in the year-end assessment.
1 1. Strictly implement the safety condominium regulations of other units in the construction process, clarify the terms and responsibilities of safety production, and strengthen supervision.
(3) Strengthen the cultivation of safety skills and awareness of all employees and the construction of enterprise safety culture.
1. Strengthen the factory-level safety education for new employees, including migrant workers, contract workers, leasing contractor personnel, visiting interns, construction workers coming to the factory, etc. All units should earnestly do a good job in the "three-level" safety education, as well as the safety education for employees who return to work or change jobs and new equipment, new processes and new technologies before they are put into production, so that they can master basic safety production skills and be competent for their posts.
2 pay special attention to the training and management of hazardous chemicals practitioners, and improve their skills and safety awareness in handling hazardous chemicals.
3. Pay special attention to the safety training, evidence collection and review of special operations personnel, and ensure that 100% is valid. In April next year, 77 pressure vessel operators will have their operation certificates re-examined when they expire. Please contact the training center of the Municipal Bureau of Quality and Technical Supervision, and try to invite the teachers of the training center to come to the factory for retraining in March. In June, the work permits of 37 hazardous chemicals operators, 2 workers and 65,438+05 workers expired. It is planned to conduct retraining in May to train and collect evidence for personnel engaged in hazardous chemicals operations due to job changes and new jobs. There are 198 operators of hazardous chemicals whose operation certificates expire in February, and retraining is planned for June.
4. The comprehensive management office shall, jointly with the Organization Department and the Technical Safety Department, conduct safety training for managers at all levels according to the cadre management authority.
5, organize safety group activities, pays special attention to the study of laws and regulations related to production safety and daily safety education. Organize employees to learn the revised safety management system and relevant provisions of workshop safety standardization, clarify their respective safety responsibilities, enhance safety awareness, improve safety skills and improve management level.
6. Organize "Safe Production Month" activities. Through the "Safety Production Month", we will continuously improve the safety awareness and skills of all employees in the enterprise, find hidden dangers, intensify rectification, improve the intrinsic safety level of the enterprise and promote the economic development of the enterprise.
7. Carry out "Safety Officer Business Competition" and "ankang cup Competition". Through various competitions, we will further study the national laws and regulations on production safety and enhance our sense of responsibility and urgency in doing a good job in safety. Seriously implement safety rules and regulations, put an end to all kinds of illegal operations and illegal orders, improve employees' consciousness of observing labor discipline, process discipline, safety discipline, environmental protection discipline and improving operation skills, sum up and popularize advanced experience in safety production, and ensure the long-term safe operation of enterprises.
8. Continue to carry out the activities of "three investigations and three violations" to control illegal operations and illegal operation events as much as possible.
(four) to improve the emergency rescue ability of production safety and the level of environmental safety.
1. Take fire prevention, explosion prevention, leakage prevention and pollution prevention as the top priority in the management of hazardous chemicals, earnestly learn the lessons from the "1 1. 13" accident in Jihua, strengthen the monitoring of production process, and strengthen the management and maintenance of overflow prevention, water sealing wells and emergency function cofferdams, as well as the fluid chemical foam fire extinguishing system and the foam covering system of on-site cofferdams.
2. Strengthen the operation monitoring of harmful gas multistage absorption system and tail gas multistage destruction system, and organize the commissioning of emergency ammonia spraying device once every quarter.
3. Strengthen the maintenance of emergency equipment such as on-site emergency sprinkler, eye washer, first aid kit and oxygen air respirator. , each unit shall designate a special person to be responsible to ensure effective use at any time.
4. Improve the emergency rescue guarantee system and further improve the emergency response capability of enterprises. Continue to revise the emergency rescue plan, especially the emergency plan for key devices and key parts of secondary units, and improve the emergency plan file system. In addition to the targeted emergency rescue drills organized by the factory department, all secondary units should conduct emergency drills for key devices and key parts once every six months to improve the emergency handling and self-rescue capabilities of organizations and personnel at all levels.
(five) to do a good job in the prevention and treatment of occupational diseases and labor protection, and to ensure the safety and health of employees.
1. Seriously implement the law on prevention and control of occupational diseases and strengthen the prevention and control of occupational diseases. All units should constantly improve the conditions of the workplace when maintaining, technological upgrading and improving the internal environment.
2, adhere to the regular monitoring of dust and poison monitoring points, and make an announcement to the staff. All units should take effective measures to prevent running, running, dripping and leaking, and ensure that the compliance rate of dust and poison monitoring is 100%.
3. Strengthen the management of labor protection articles, check the planning, approval, ordering quality and distribution of labor protection articles, and guide and urge employees to wear and use them as required.
4. Carry out occupational health examination for employees in a planned way to ensure their health.
Related articles:
1.20 19 Five Work Plans for Factory Workers in the Second Half of the Year
2. Chemical plant personal annual work summary and work plan.
3. The second half of the personal work plan model.
4. Company employees' personal work plan for the second half of the year
5. Selected model essays on personal work plan in the second half of the year