Commonly known as welder's operation certificate, welder's work certificate. It is also a necessary certificate for everyone to take the exam. It was issued by the Administration of Work Safety, that is, the Safety Supervision Bureau. It is an IC card certificate similar to an ID card, and its full name is fusion welding and hot cutting operation. This certificate mainly shows that you have the knowledge and ability of safe operation in this type of work. After all, the employment permit is valid for six years, and you can apply for review every three years, 2-3 months before the review time. This certificate is universal throughout the country.

Welder operators can register at the local safety supervision bureau, and they can get the certificate in about 1~2 months after passing the exam. With this certificate, you are qualified to engage in the welding industry, and the inspection by the superior leader or the safety supervision bureau is also to check this certificate. Any accidents and special circumstances in the work are also guaranteed when the responsibility is investigated. Without this operator, it is illegal operation, and the insurance company will bear the responsibility itself and will not compensate. Therefore, this operation certificate is the first certificate before a welder friend takes up his post.

Second, the welder qualification certificate

The national vocational qualification certificate and national documents clearly stipulate that employees employed by enterprises must hold this certificate. Welder grade qualification certificate: commonly known as welder grade certificate, issued by human resources and social security bureau, also known as labor bureau in the past. Welder occupation is divided into five grades, namely: primary (national vocational qualification level 5), intermediate (national vocational qualification level 4), advanced (national vocational qualification level 3), technician (national vocational qualification level 2) and senior technician (national vocational qualification level 1). This certificate is comprehensively evaluated according to factors such as welding seniority and technical level.

It can be said that every student in a vocational school or technical secondary school can easily get an intermediate certificate. As a result, many people can get this certificate before reaching this level, but it is limited to intermediate or advanced certificates.

You can look at the examination requirements of this grade certificate first:

Grade declaration conditions

Mainly (one of the following circumstances)

(1) Reach the standard class hours specified in the formal primary training of this occupation, and obtain the graduation (completion) certificate.

(2) Engaged in this vocational training for more than 2 years.

Intermediate (one of the following conditions):

(1) After obtaining the primary qualification certificate of this occupation, he has been engaged in this occupation for more than 3 years continuously, received the formal training at the intermediate level of this occupation for the specified number of hours, and obtained the graduation (completion) certificate.

(2) Having worked in this occupation for more than 5 years after obtaining the primary vocational qualification certificate of this occupation.

(3) Obtain the vocational graduation certificate of the secondary vocational school with intermediate skills as the training goal recognized by the administrative department of labor and social security.

Advanced (one of the following conditions)

(1) After obtaining the intermediate vocational qualification certificate of this occupation, he has been engaged in this occupation for more than 4 years continuously, and has obtained the graduation (completion) qualification certificate after reaching the prescribed standard hours through the advanced formal training of this occupation.

(2) Having worked continuously in this occupation for more than 7 years after obtaining the intermediate vocational qualification certificate of this occupation.

(3) Engaged in this occupation 10 years or more.

(4) Obtaining the vocational graduation certificate of a senior technical school or a higher vocational school with the training goal of advanced skills recognized by the administrative department of labor and social security.

(5) graduates of this major or related majors have obtained the intermediate vocational qualification certificate of this occupation and have been engaged in this occupation for more than 2 years.

Technician (meet one of the following conditions):

(1) Obtained the senior vocational qualification certificate of this occupation, worked in this occupation for more than 5 years continuously, and obtained the graduation (completion) certificate after the formal skills training of this occupation reached the required standard hours.

(2) Having been engaged in this occupation for more than 8 years continuously after obtaining the senior vocational qualification certificate of this occupation.

(3) Graduates from senior technical schools have been engaged in this occupation for 2 consecutive years.

Senior technician (meet one of the following conditions):

(1) After obtaining the professional qualification certificate of the professional technician, he has been engaged in his own work for more than 3 years continuously, and has been trained by the regular senior technician of this major to reach the required standard hours, and has obtained two (knot) pages of qualification certificate.

Three, special equipment welder certificate

Having a welder's operation certificate is only the first step to become a welder. To be a welder, you need to take this certificate. Welding certificate for special equipment operation: commonly known as high-pressure welding certificate and pressure vessel certificate. It is a welder's certificate issued by the Bureau of Quality and Technical Supervision, which is specially used for welding pipelines. Authoritative and effective.

Why is this certificate an important document as a welding master? Because the welder's operation certificate is only used for welding simple weldments, it is generally used for daily use, such as welding a table, chair and the like. Moreover, this kind of special equipment operation is mainly used for welding advanced special equipment such as pipelines, cranes and pressure vessels! The grade is completely different.

Moreover, this certificate needs to be trained in a qualified training center, and the certificate will be issued after passing the theoretical examination and skill operation examination.