Summary is to analyze and study the relevant situation at a certain stage, and make instructive empirical methods and written materials of conclusions, which can enhance our ability to find problems, so we should make a good summary and write a good summary. How to write a summary without becoming a mere formality? The following is my summary of the work in thermal power plants. Welcome to share.
Summary of thermal power plant work 1 February, the power plant * * * generated 52.38 million kWh. Under the leadership of the factory department, the equipment technology department starts with the details of equipment management and technical management, focusing on the inspection and supervision of equipment inspection, lubrication and original records. , so as to standardize the standard. Combined with the trial operation of the work sharing system, the professional management and assessment are continuously strengthened, so that the professional management of power plants is gradually standardized.
1. This month, we mainly organized the work according to the work responsibilities and standards of the Equipment Technology Department of the power plant, started with the basis of equipment technology management, continued the system of "two inspections and one announcement", and comprehensively supervised and guided the basic management of equipment technology in the whole plant.
2. This month, due to the Spring Festival and boiler overhaul, we conducted three professional comprehensive inspections of the whole plant, including 23 inspections, 17 inspections and * * * inspections of 5 1 minute. The problem focuses on the spot check and the writing of records. After inspection and assessment, post personnel gradually attached importance to professional management, and various system standards were implemented.
Third, timely cooperate with the workshop to submit, urge and accept spare parts, and implement the spare parts that restrict several major transformation projects of the power plant one by one. 1#2# heat-resistant stainless steel plate with core pipe has arrived at the factory; No.3 boiler fan reconstruction agreement has been signed, and spare parts will arrive at the factory in mid-April; Under the coordination of the company, the chain bucket machine has started to be delivered and will be installed soon. The coal feeder belt and air conditioner in the machine room are still actively coordinating with relevant departments.
Four. Equipment operation this month:
On the afternoon of February X, the manhole door mat on the left side of 3# boiler drum leaked, and the boiler was stopped for treatment and maintenance for 3 days. The left and right cushions were replaced, and other parts of the boiler were comprehensively inspected and overhauled, and some defects that could not be handled without stopping were dealt with, and the grid was connected at noon on February X. On the afternoon of February X, the pin of the primary fan coupling of No.3 boiler was broken, and the boiler was stopped urgently. Four hours later, the turbine was connected to the power grid. The rest of the equipment is normal.
5. This month, we also organized related majors to make a statistical report on technical transformation and energy-saving projects in xx years. At the same time, the transformation scheme of the limestone bin of the boiler has been formulated and the material plan has been reported. After the materials arrive at the factory, the construction will be organized.
Consumption of intransitive verbs
* * * 375,522.50 yuan was delivered from the warehouse this month, including 65,438+08,392.83 yuan for labor insurance, 65,438+06,996.26 yuan for acid, 3,748.87 yuan for alkali and 62,367.75 yuan for loader, which was not included in the assessment. The first phase of the feed water pump accessories is 63,447 yuan; 3# unit high water gate 1 1 165438 yuan; The repair cost of high-voltage motor in electric instrument workshop is 26,495 yuan; Online inspection of spare parts is 4928 yuan; 1# air compressor computer control panel 9226 yuan;
The combustible content of slag was 2.0%, 1.5% and 1.3%, respectively, which were 0.8%, 0.47% and 0.8 1.0% higher than that of last month.
The combustible content of fly ash is 0.4% and 0.7%, which are 0.23 and 0.44 percentage points higher than that of 0. 17% and 0.26% in last month respectively.
The steam output per ton of coal is 3.63 tons, an increase of 0.2 tons from 3.43 tons last month.
The acid consumption is 16.22 tons, and the acid consumption per ton of water is 0.459 kg.
The alkali consumption is 13.84 tons, and the alkali consumption per ton of water is 0.39 kg.
Seven, repair the old and use the waste.
* * * Maintenance 10 this month, and maintenance of 33 items, including 8 items in the electric instrument workshop, 2 items in the turbine workshop and 4 items in the boiler. In addition, the outlet pipe of the exhaust fan of unit 1 was reformed by using the waste pipe of 20 meters in the steam turbine workshop.
Work plan for August and February
1 and February, the equipment department will continue to do a good job of two inspections and one announcement, further refine the technical management of equipment and promote the professional management of each workshop.
2. Cooperate with Shandong Deere Installation Company to prefabricate the core tube and improve the limestone silo.
3. Continue to implement the submission and procurement of spare parts. Speed up the conveying of chain bucket machine and solve the problem of long-term manual slag pulling. Urging spare parts for pneumatic ash conveying, coal feeding belt and air conditioner.
4, cooperate with the workshop to do a good job of maintenance.
Summary of thermal power plant work II. I have been working for more than a year. In this year's work, I seriously study and study technology, and my ability and ideological quality are constantly improved and improved. Under the care of the company and the team, I have changed from a student who has just entered the society to an enterprising power plant operator.
Since the beginning of this year, from my job responsibilities, I am very grateful to the company leaders and team members for their support and help, so that I can practice what I have learned in textbooks and learn what I can't learn in school. These achievements are inseparable from the help of leaders and team members. We will summarize our work in the past year:
1. I am serious and responsible for my work, and I love my job. I use the company philosophy to demand myself, be honest with others, do things practically, obey the arrangement of the leaders, stick to my post when the team is short of people, work hard, and have difficulties in customer service. I carefully inspected the site, spared no tiny equipment defect, and informed the team leader as soon as I found the problem, thus avoiding the occurrence of major equipment accidents. I always take a positive attitude towards my work, especially during this year's minor repairs, Unit 2 worked at 12 for more than 20 days. Although it was hard work, I learned something that I couldn't learn when normal equipment was running.
Second, study hard technology, study hard theory, and learn the operating rules by heart; In practice, strictly abide by the operating rules, cultivate the correct operating ability, ensure that no misoperation accidents occur, record the problems encountered in the work, experience gained and matters needing attention at any time, and humbly ask the master for advice. Although I have worked independently, I know that it takes time to hone and accumulate knowledge if I want to learn operational knowledge thoroughly and step by step and make myself stronger day by day. After work, don't forget to use books, internet and other resources to supplement yourself and broaden your horizons.
Open, continue to charge, and supplement your own shortcomings. At the same time, after the unit entered the winter operation, the company strictly grasped the lack of safety awareness of employees in the winter operation of the unit and organized each team to learn. Through organizing training, I realized my lack of technical knowledge and inspired me to study harder in the future.
Third, the ability includes coordination ability and the ability to deal with accidents. If "technology" is compared to "IQ", then "ability" can be compared to "emotional intelligence", and so can operation. A high IQ does not necessarily mean a high EQ, because technology is dead and ability is alive. One year's work experience tells me that only by studying and applying can I do better.
Fourth, accumulate work experience and implement the company's "energy saving and consumption reduction". On the basis of qualified water quality, excellence and safe operation are the first, and economic operation should also be taken into account. If the water quality of the auxiliary engine is not harmonious, the sewage should be started in time to make the water quality qualified in the shortest time, and the chemical personnel should be contacted in time to check the water quality. Once qualified, the drain valve of auxiliary water tank should be closed quickly, which not only ensures the safe operation of the unit, but also reduces the waste of auxiliary water.
Five, in a year's work, I also realized my own shortcomings, such as the lack of on-site equipment operation and technical knowledge, and sometimes the lack of understanding of safety work. In the future study, I will improve my learning enthusiasm and initiative, let myself grow into a qualified inspector as soon as possible, strengthen my study and cognition of the company's safety regulations, and make efforts for the safe operation of the unit.
Summary of Work in Thermal Power Plant In the past 3 XX years, with the joint efforts of all employees, we have adhered to the policy of "safety first, prevention first", conscientiously implemented the spirit of the documents on safety production of the Electric Power Bureau, comprehensively strengthened safety management, continued to do a good job in establishing and implementing the most basic safety management rules and regulations, established and improved the safety guarantee system, implemented the responsibility system for safety management of personnel at all levels, and focused on implementing "two votes and three systems". In order to put an end to personal accidents, focusing on the prevention of personal injuries and deaths, a struggle against personal accidents was carried out with the main contents of "six noes" (no working ticket, no disclosure before operation, no on-site supervision, no power failure during operation, no electricity inspection and no grounding wire hanging), anti-rod falling and anti-electric shock. Take various forms to improve the level of safety management, so that the safety situation in our hospital is basically stable. This paper briefly reviews the safety work in XX years, and arranges the annual safety work objectives in XX years.
A, XX years safety production target completion:
1, 365 days of safe production throughout the year;
2. No personal injury or above accidents occurred in power production;
3. No major rural power grid accidents occurred;
4. There is no fire accident with economic loss of more than XX yuan;
5. No electrical misoperation accident occurred;
6. No falling accident occurred;
7. No major or multiple responsibilities related to power production;
8. Equipment, machinery, instruments and vehicles are not damaged due to personnel responsibility, and the economic loss exceeds 5000- 10000 yuan;
9. There is no communication obstacle that affects major operations and accident handling due to communication interruption, which leads to accident expansion or constitutes an accident;
10. No equipment accident occurred due to poor maintenance quality.
1 1, up to 65438+February 1 day in XX, the annual safety production was 334 days, and the cumulative safety production was X days.
The second is to do a good job in the operation and maintenance of line equipment and solve difficult and outstanding problems;
According to the analysis of line equipment operation in previous years, line tripping is basically caused by lightning arrester and transformer faults. From the analysis of the causes of lightning arrester failure, many of them are old-fashioned valves, mainly because they have not been tested for a long time. From the cause analysis of transformer fault, the performance deterioration of insulating oil accounts for a large proportion. In XX, our hospital eliminated and replaced a number of arc-extinguishing drop switches and zinc oxide lightning arresters, and added a number of transformer head-mounted sheaths. From the analysis of operation, the actual effect is very obvious. Therefore, this year, our hospital replaced the remaining 58 groups of old-fashioned valve arresters in the whole network area with zinc oxide arresters, replaced 23 groups of arc-extinguishing drop switches and installed 232 transformers. This year, our hospital 10KV line tripped three times, five times less than the same period in XX (eight times), which laid a good foundation for ensuring safe production throughout the year.
Third, strengthen basic management and establish a long-term mechanism for safety production management:
1. Strengthen safety training and improve the safety quality of workers: Practice has proved that improving the safety quality of workers is in line with this accident prevention measure and must be intensified. According to the employee training plan formulated at the beginning of this year, our hospital has carried out various safety training activities in a targeted manner, and organized employees to learn the habitual violations that should be prevented in their work. So as to help employees grasp the initiative of safe production.
2. Do a good job in the analysis and pre-control of dangerous points to nip in the bud. According to the known situation in the past and now, analyze, judge and speculate the dangerous points in the operation, give full play to the role of employees, conduct in-depth and lasting analysis and pre-control of dangerous points, and be pragmatic and achieve results. Improve the accurate application of hazard analysis and pre-control in practical work.
3. Continue to strengthen the implementation of the "two votes" and effectively ensure the seriousness of the "two votes". This year, we will work for * * *? All of them passed the examination of the Electric Power Bureau and achieved a good result of 100% passing rate of "two votes".
4. Seriously and solidly carry out the assessment of "quarterly safety accident-free activities" to ensure that the annual safety target is achieved in a short period of time.
5. According to the annual "two measures" plan of the Electric Power Bureau, I formulated the annual "two measures" plan that suits my reality, and put it in place.
6. Break down safety responsibilities at different levels, put an end to all kinds of illegal acts, intensify the investigation and punishment of "three violations", implement the life insurance team and the team security office, and make concerted efforts to achieve the goal of "zero violation" in this year's work.
7. Strengthen the second-season maintenance and daily maintenance management of equipment. According to the change of load and seasonal characteristics, special safety inspections are carried out for frequent and dangerous accidents, and preventive measures are taken to ensure the healthy operation of equipment. During the two-season maintenance work this year, our hospital cleaned all needle bottles and hanging bottles, cleaned all transformers, capacitors and ancillary equipment, and dismantled and cleaned the parallel hook clamps at the wire connection points in line with the maintenance principle of "having to repair them well". In addition, all the 232 groups of valve arresters in this network area were replaced by zinc oxide arresters, and high-voltage sheaths of distribution transformers 165 sets were installed, 90 line passages were cleaned, and trees along the line 12 16 trees were cut or trimmed. Replace the high voltage conductor with two insulated conductors; Replace 1 1 unqualified needle bottles, and replace 3 of 2 infusion bottles; Replace 5 tie wires; By heightening the cylinder bottle, the distance support points between shoulders, lines and lines of special rod types are adjusted; 1 1 root soil cultivation base; Eliminate other defects 45.
4. Actively carry out "love activities" and implement "peace projects";
Since the beginning of this year, our hospital has conscientiously implemented the spirit of the decision of State Grid Corporation of China to carry out "love activities" and "safety projects", and strictly implemented it in accordance with the requirements of the Work Plan for Carrying out "love activities" and "safety projects" in the safety production document No.41of the Electric Power Bureau. Through the "love activity", the rigid system and humanized management are organically combined, and the "love concept" of caring for enterprises, others, oneself, family and society is vigorously advocated among employees, and education and training are vigorously strengthened to improve the quality of all employees and realize the harmonious development and progress of employees, enterprises and society; Through the implementation of the "Safety Project", with the goal of power grid safety, employee safety, enterprise stability and social harmony, we will establish a "safety concept", establish a "safety mechanism" and build a "safety culture" throughout the institute, so as to promote the long-term security and stability. By carrying out "love activities" and "safety projects", we will conscientiously carry out "eight love activities" and "three creation tasks" in the hospital's safety production work, realize the "three safety projects", guide employees to establish "love concept" and "safety concept", cultivate "love culture" and "safety culture", fully complete the XX-year safety production tasks, and achieve the safety production goal.
Summary of thermal power plant work. Since the beginning of the year, our company has continued to actively carry out various safety management work, and the company's safety production work has been continuously improved to ensure the safety and stability of production. The report is as follows.
I. General situation
1, completion of safety indicators
2. Through the "safety evaluation" and NOSA safety, health and environmental protection system, vigorously rectify the hidden dangers of equipment and the dirty, chaotic and poor defects on the site, and comprehensively strengthen the rectification of hidden dangers of production equipment and facilities, so that the hidden dangers of safety are continuously eliminated and the health level of equipment is continuously improved.
3, constantly improve the operation management, strengthen the operation skills training of operators, improve the operation level of personnel, reduce man-made unsafe hidden dangers.
Through the above efforts, the company's safety situation was basically stable throughout the year, and no accidents occurred. Compared with 20xx, the first and second kinds of obstacles are reduced, and some key hidden dangers on site are rectified.
Two. Work deployment and effective practice
1, the company leaders attached great importance to safety management, personally deployed various safety production work, put forward clear requirements in combination with the weak links and outstanding problems of the company's safety production, and at the same time took the lead, not only using various occasions to publicize safety concepts, but also taking the lead in organizing and participating in on-site safety inspections, giving full play to the exemplary role.
2, starting from the safety awareness of employees, to implement safety education and training for all employees.
During the B-level maintenance of two units from March to June, all construction units and special operators were given safety training examinations and on-site safety disclosure. At the same time, in March and April, the annual safety inspection of all employees, the inspection of "three types of people" in work tickets and the approval of special types of work were completed, and the maintenance units were inspected several times.
The company's website opens a safety column, continuously uploads a large number of safety production materials, and organizes various departments and employees to carry out learning. Make use of the company's publicity column, banners, slogans, the Internet, making brochures and other ways to vigorously promote the knowledge of safety in production, accident prevention methods and self-protection. For example, for the B-level maintenance of the unit, design and make a publicity column of maintenance safety knowledge, and organize employees of various maintenance units to watch construction safety videos. In June, we organized the activities of "Safety Month", designed and produced the publicity column of Safety Month, conducted in-depth safety publicity and training, and organized more than 100 people to participate in the "Safety Month" knowledge contest.
The company has strengthened the requirements of regular safety activities of teams and groups in various departments, and made safety training and education files for employees, "one person has one file". We designed and produced a safety production brochure and distributed it to every employee. Through the training and promotion of NOSA safety, health and environmental protection system, we constantly enhance the safety awareness and professional skills of employees, and strive to minimize all kinds of man-made accidents.
In June, with the theme of "safety responsibility is focused on implementation", our company organized an essay activity on safety production, and also participated in the national knowledge contest on electric power safety production network organized by the Safety Supervision Bureau of the State Electricity Regulatory Commission. As of June 30th, * * * had 18 people taking part in the essay activity, and 8 1 person took part in the online knowledge contest, among which the highest score reached 9356, and the top five were all above 6000.
3. Strengthen the basic management of safety production and build a long-term mechanism for safety production. Company leaders attach great importance to safety production companies, personally pay attention to safety production, and publicize and implement new concepts, methods and models of safety production management on different occasions. The company insists on regular safety activities, such as monthly safety analysis meeting. At the meeting, all departments actively prepared detailed information in PPT form, and carefully analyzed, evaluated and summarized the shortcomings in the work of safety production last month, which made the work of safety production form a good atmosphere and promoted the continuous progress of the work of safety production. Safety supervision strengthened the management of basic safety work, and checked the learning situation of various departments and safety teams. Throughout the year, the company organized dozens of safety technical training examinations for maintenance units.
4. Revise and improve various safety management systems and regulations, and improve the staffing of the three-level safety net. At the beginning of the year, the company issued a "two systems" notice, which clarified the safety responsibilities of production personnel at all levels. Companies, departments, teams, teams and individuals all sign letters of responsibility at different levels, so that every grass-roots manager and employee can understand their safety responsibilities. At the same time, combined with NOSA and safety evaluation, the company has formulated and improved hundreds of standards, systems and emergency plans, improved the organization of safety committees, and established the Safety, Health and Environment Committee, effectively strengthening the organizational strength and institutional foundation of safety production.
5. Revise all kinds of emergency plans, carry out emergency plan drills, and constantly improve the power emergency management system. Our company has basically finished.
Revise the comprehensive emergency plan, special emergency plan and on-site disposal plan. Personnel and materials were inspected according to the plan, and a fire emergency drill was conducted at the end of 10.
6. Strengthen daily safety supervision and assessment, strictly implement various safety production rules and regulations with "two votes and three systems" and anti-violation as the main contents, comprehensively intensify anti-violation work, severely crack down on on on-site violations, effectively punish unsafe behaviors, and better play a warning and crackdown role. The company has formulated the Detailed Rules for the Implementation of Anti-Violation, and made it into a small manual to be distributed to each employee and the personnel of the outsourcing unit. At the same time, three-level anti-violation files of companies, departments and teams have been established, and anti-violation propaganda has been strengthened.
This year, the company has many maintenance times and a long time. Safety supervision and management personnel of all departments carry out safety and civilized construction inspection on the maintenance site every day, and take the unit maintenance as an opportunity to focus on safety education and training and qualification examination of foreign inspection teams, severely crack down on and promptly correct illegal and uncivilized construction on site, and organize more than ten special safety inspections such as scaffolding, construction electricity, container construction, fire prevention, high altitude and lifting according to the maintenance progress and stage. More than 50 safety and civilized construction checklists and more than 40 safety inspection reports were issued throughout the year. In the maintenance process of nearly five months throughout the year, there was no personal injury or equipment damage accident.
7. Take the safety evaluation and NOSA work as an opportunity to actively carry out equipment transformation to improve the safety level of on-site equipment.
1) attaches great importance to safety evaluation and rectification, formulates rectification plans, decomposes tasks item by item, determines responsible persons, and urges to determine the closed loop of rectification projects.
2) Actively promote the NOSA work. The company has formulated an overall implementation plan, and at present, more than 40 management standards have been formulated for each element, and they are increasing. According to the overall implementation plan, make a work plan every month and implement it as planned. This work has been continuously strengthened and achieved results.
3) This year, the company invested heavily in replacing the inner cylinders of two boiler chimneys with titanium-steel composite plates made of carbon steel and glass bricks, which greatly enhanced the corrosion resistance and eliminated the company's biggest hidden danger. At the same time, taking the C-level overhaul of # 1 unit as an opportunity, the hidden dangers of production equipment and on-site facilities were comprehensively rectified, especially the long-standing vibration problem of # 1 unit was thoroughly investigated and analyzed, and the major defect of rotor thermal deformation was found. Therefore, the maintenance time was extended and the unit was specially returned to the factory for maintenance. In June, the # 1 unit operated stably, and major hidden dangers were completely eliminated. At the same time, this year, serious hidden dangers such as hydrogen leakage control of # 1 unit, lightning protection reform of lines, leakage elimination of pulverizing system, addition of railway overpass and wall reform of hydrogen station in oil depot have been treated, and all the work has been completed.
8. Improve the operation management and implement a series of effective measures for a long time to ensure the safe operation of the unit. For example, the safety measures for single machine and single line operation of main engine, safety measures for low load operation and preventive measures for boiler MFT caused by poor coal quality are formulated. At the same time, according to the change of coal type, the boiler combustion adjustment test is carried out in time, which improves the stability and economy of boiler combustion. At the same time, according to the seasonal characteristics, formulate safety measures such as flood control, high temperature prevention, lightning protection, etc., regularly analyze dangerous sources and dangerous points, and actively carry out safety technology learning. Each shift is expected to have an accident, forming a good safety atmosphere, so as to realize the safe and controllable supervision of operating units.
9, go all out to do a good job of hidden dangers investigation and rectification, to carry out major hazard monitoring and safety risk management, and regularly carry out seasonal and holiday safety inspections. Our company will investigate and establish major hazards, formulate targeted emergency plans, and regularly check hazards. Throughout the year, the company organized many seasonal safety inspections and two major safety inspections such as spring, peak summer, National Day, autumn and winter. At the same time, special inspections will be carried out before the Spring Festival, National Day, Shenzhen Universiade and other holidays and major events. Moreover, the company implements a weekly safety inspection system, and the whole plant is divided into regions, and inspection specifications are formulated. Every weekend, various departments are organized to conduct safety inspections, and safety supervisors and professional and technical personnel conduct on-site safety inspections every day. Strict and meticulous work effectively ensures the safety of personnel and equipment.
10. Strengthen the safety management of fire protection, security, transportation and food, and create a harmonious and safe company environment. The company strengthened the coordination, supervision and assessment of public security, focused on the implementation of the guard duty system and on-site patrol system, conducted random checks on various posts every day, intensified the inspection of incoming and outgoing items, and found and prevented foreigners from being stolen many times, thus reducing losses for the company.
;