As a tattoo artist, you should also master the operation of a certain tattoo machine. For eyebrows, we generally use the method of pricking, and tattoo machine moves at an angle of about 60 degrees with the skin along the needle tip direction. Oblique spines are used for coloring and thread making. Straight needling makes a 90-degree angle with the skin, which is used for eyebrow surgery, line drawing and floating needle. Move in the direction of needle layer.
Tattoo technology will be of great help to many tattoo artists. Let's take a look at the advice given by a senior tattoo artist on how to do a good tattoo quickly and well. First of all, the single needle arrangement of fog eyebrows generally moves in two directions, one from the end of eyebrows to the center of eyebrows and the other in the opposite direction. This is the operation of needle in tattoo technology. The point where the needle of the eyebrow falls is the position where it cannot fall on the eyebrow at all. First, try to walk the needle for a distance, and then slowly put the needle on your forehead. Then the processing eyebrow in this direction will be larger than the last operation. When doing needles, a good feeling should have a process from air to skin and then to the depth of needles. Otherwise, if you really touch the skin and other aspects, you may have a deep pimple on your skin, leading to stiff eyebrows. The operation of tattoo technique from the end of eyebrow to the direction between eyebrows will be more difficult. The direction of the needle should start from the position of the eyebrow. If you are not familiar with this method, it is easy to make an excessive frown.