City: Taiyuan charge price: not announced, please consult the training institution: Taiyuan Vocational Training School Details: 1) No one is allowed to get on or off the excavator and transfer articles during operation, and maintenance is not allowed during operation; Do not adjust the engine (governor), hydraulic system and electronic control system at will; Attention should be paid to selecting and creating a reasonable working face, and it is forbidden to make holes. 2) After the dump truck stops, the excavator should be unloaded; When unloading, the height of the bucket should be lowered during the day, so as not to collide with any part of the dump truck; It is forbidden for the bucket to cross the cab of dump truck. 3) It is forbidden to crush solid objects with a bucket; If you encounter large stones or hard objects, you should remove them before continuing the operation; After blasting, it is forbidden to dig rocks above grade 5. 4) It is forbidden to arrange excavators to work at the same time in the upper and lower excavation sections; When the excavator moves in the working face, it should first level the ground and clear the obstacles in the passage. 5) It is forbidden to lift the excavator with the bucket cylinder fully extended. Jinzhong Excavator Training Student Excavator Shuozhou Excavator School Xinzhou Excavator Training Center Yangquan Excavator Training Lvliang Excavator Training Jincheng Excavator Changzhi Excavator School Linfen Excavator Yuncheng Excavator School Taiyuan Excavator Bucket can't run sideways or turn around without leaving the ground. 6) It is forbidden to drag other objects horizontally with the boom of the excavator; Hydraulic excavators can't dig by impact method. 7) When the excavator does rotary motion, it is not allowed to operate the rotary handle in the opposite direction. 8) The driver should pay attention to the operation of the excavator at any time, stop and check immediately if any abnormality is found, and troubleshoot in time. 9) During the operation and operation of the excavator, always check whether the hydraulic oil temperature is normal. 10) When the excavator encounters wires, intersections, bridges and culverts in the operation, it should pass after knowing the situation, and should be commanded by designated personnel when necessary; The distance between excavator and high-voltage wire shall not be less than 5m; Walking backwards should be avoided as much as possible. 1 1) When the excavator is running, its boom should be parallel to the traveling mechanism, the turntable should be locked, and the bucket should be about 1m off the ground. When driving downhill, you should use low gear, and it is forbidden to slip out of gear. 12) The walking route of the excavator should keep enough distance from slopes, ditches and foundation pits to ensure safety; When crossing the soft zone, you should drive at a low speed and at a constant speed, and pave with boards and stones if necessary. Technical work after operation