A, electrician operators
Second, the metal welding and cutting personnel
Three, lifting machinery (including elevator) operators
Fourth, motor vehicle drivers in enterprises
Five, climbing erection personnel
Six, refrigeration workers
Seven, dangerous goods operators
Eight, miners and other seventeen related personnel
References:
soj/...D=2284
Question 2: Who is the special operator? Special operation directory.
1 electrician operation
Refers to the operation, maintenance, installation, overhaul, transformation, construction and debugging of electrical equipment (excluding the operation of power system into the grid).
1. 1 high voltage electricity industry
It refers to the operation, maintenance, installation, overhaul, transformation, construction, debugging, test and detection of high-voltage electrical equipment with 1 kV and above.
1.2 low-voltage electrician operation
Refers to the installation, debugging, operation, maintenance, overhaul, transformation and test of low-voltage electrical equipment below 1 kV.
1.3 explosion-proof electrical operation
Refers to the installation, overhaul and maintenance of various explosion-proof electrical equipment.
It is suitable for explosion-proof electrical operation except underground coal mine.
2 Welding and hot cutting operations
Refers to the operation of processing materials by welding or hot cutting (excluding related operations stipulated in the Regulations on Safety Supervision of Special Equipment).
2. 1 fusion welding and hot cutting operations
Refers to the use of local heating method to heat the metal or other materials at the joint to a molten state to complete welding and cutting operations.
Suitable for gas welding, gas cutting, covered electrode arc welding, carbon arc gouging, submerged arc welding, gas shielded welding, plasma arc welding, electroslag welding, electron beam welding, laser welding, oxygen flux cutting, laser cutting, plasma cutting and other operations.
2.2 pressure welding operation
Refers to the welding operation completed by applying a certain pressure during welding.
Suitable for resistance welding, gas pressure welding, explosive welding, friction welding, cold pressure welding, ultrasonic welding, forging welding and other operations.
2.3 Brazing operation
It refers to the operation of using a material with a melting point lower than that of the base metal as the solder, heating the weldment and the solder to a temperature higher than that of the solder but lower than that of the base metal, wetting the base metal with liquid solder, filling the joint gap, and diffusing with the base metal to realize the connection of the weldment.
Suitable for flame brazing, resistance brazing, induction brazing, immersion brazing and furnace brazing, excluding soldering iron brazing.
3 aerial work
Refers to the operation that is carried out specially or often at a height of 2 meters or more from the reference plane of falling height and is likely to fall.
3. 1 Climbing erection work
Refers to the work of erecting or dismantling scaffolding and spanning frames at high places.
3.2 Installation, maintenance and disassembly at high places
Refers to the high installation, maintenance and demolition work.
It is suitable for indoor and outdoor decoration, cleaning and decoration of buildings, erection of power and telecommunication lines, erection of overhead pipelines, installation and maintenance of small air conditioners, installation, overhaul and maintenance of various equipment and outdoor advertising facilities, and demolition of high-rise buildings, equipment and facilities.
4 Refrigeration and air conditioning operation
Refers to the operation, installation and maintenance of large and medium-sized refrigeration and air conditioning equipment.
4. 1 Operation of refrigeration and air conditioning equipment
Refers to the operation of large and medium-sized refrigeration and air conditioning equipment in various production and operation enterprises and institutions.
Suitable for chemical enterprises (petrochemical, chemical, natural gas liquefaction, process air conditioning), mechanical enterprises (cold processing, cold treatment, process air conditioning), food enterprises (brewing, beverage, frozen or frozen prepared food, process air conditioning), agricultural and sideline products processing enterprises (slaughtering and meat food processing, aquatic product processing, fruit and vegetable processing), storage enterprises (cold storage, cold storage, cold storage, cold storage, cold storage.
4.2 Installation and maintenance of refrigeration and air conditioning equipment
It refers to the installation, debugging and maintenance of the whole refrigeration and air conditioning equipment, components and related systems referred to in 4. 1.
5 coal mine safety operation
5. 1 Electrical Operation in Coal Mine
Refers to the installation, debugging, inspection, maintenance and troubleshooting of mechanical and electrical equipment in coal mines to ensure the safe operation of mechanical and electrical equipment in this class.
Suitable for pit exploration, mine construction, underground electric tongs and other coal-related operations.
5.2 coal mine underground blasting operation
Refers to the blasting operation in coal mine.
5.3 Coal Mine Safety Monitoring Operation
Refers to the installation, debugging, inspection and maintenance of coal mine underground safety monitoring system to ensure its safe operation.
It is suitable for safety monitoring and monitoring operations in mine exploration, mine construction and coal-related mining.
5.4 Coal Mine Gas Inspection Work
Refers to the coal mine gas inspection work, responsible for the integrity of ventilation facilities and ventilation gas inspection within the jurisdiction, fill in various records according to regulations, and handle or report the problems found in time.
Applicable to coal * * *...> & gt
Question 3: Who is the special operator? They are operators who are directly engaged in the safety of the operators themselves or others and their surrounding facilities in the production process.
According to the national standard "Management Rules for Safety Technology Assessment of Special Operators", electrician operators, boiler firemen, pressure vessel operators, crane operators, blasting workers, metal welding (gas cutting) operators, coal mine gas inspectors, motor vehicle drivers, motor boat drivers and turbine operators, building erection operators and other operators who meet the definition of special operators are all special operators.
Basic conditions for special operators:
(1) at least 18 years old;
(2) Good health, no diseases and physical defects that hinder the operation of the corresponding type of work;
(3) Junior high school (including junior high school) or above, with the knowledge of safety technology of corresponding types of work, participating in the theoretical and practical assessment of safety technology stipulated by the state and passing the examination;
(4) Meet other conditions required by the characteristics of the corresponding type of work.
According to the Law on Work Safety and Assessment Opinions on Safety Technology Training for Special Operators, special operators must receive special safety technology training suitable for this type of work, pass the theoretical assessment of safety technology and the assessment of practical operation skills, and obtain the operation certificate for special operations before taking up their posts. Those who have not been trained or failed in training and examination shall not be allowed to work at their posts.
Question 4: What types of work in building construction belong to the Regulations on the Management of Special Operators in Building Construction?
Jian Zhi [2008] No.75
Chapter I General Principles
Article 1 In order to strengthen the management of special operators in construction and prevent and reduce production safety accidents, these Provisions are formulated in accordance with the Regulations on Safety Production License, Provisions on Safety Supervision and Management of Construction Hoisting Machinery and other laws and regulations.
Article 2 These Provisions shall apply to the assessment, certification, employment, supervision and management of special operators in construction.
The term "special construction workers" as mentioned in these Provisions refers to those who engage in operations that may cause great harm to themselves, others and the safety of surrounding equipment and facilities in the construction activities of houses and municipal projects.
Article 3 Special operations in building construction include:
(1) Building electrician;
(2) Construction scaffolder;
(3) Construction hoisting signal company;
(4) Construction crane driver;
(five) construction crane installation and disassembly workers;
(6) Installation and disassembly of hanging basket for aerial work;
(seven) other special operations identified by the people's construction departments at or above the provincial level.
Article 4 Special construction workers must pass the examination by the competent construction department and obtain the operation qualification certificate of special construction workers (hereinafter referred to as "qualification certificate") before they can take up their posts and engage in corresponding operations.
Article 5 The competent construction department of the State Council shall be responsible for the supervision and management of special construction personnel throughout the country.
The competent departments of people's construction of provinces, autonomous regions and municipalities directly under the Central Government shall be responsible for the supervision and management of special construction workers within their respective administrative areas.
Regulations on the administration of production safety in construction projects
Article 25 Operators of vertical transport machinery, installers and dismantlers, blasters, signal workers, climbers and other special operators must receive special safety operation training in accordance with relevant state regulations and obtain special operation qualification certificates before they can take up their posts.
Question 5: Who is the special operator? Special operators refer to electricians, riggers, boiler workers, pressure vessel workers, welders, building climbers, motor vehicle drivers, gas inspectors and blasting workers. Because their operation has great harmful factors to the operators themselves, especially to the safety of people and equipment around them, users must carry out professional training and education.
Question 6: Who are special operators? BD A should be called a special equipment operator, not a special operator.
Question 7: What are the jobs of special operators in construction projects? Certificate management system for special operators
In order to strengthen the safety technical training, assessment and management of special operators, realize safe production and improve safety performance.
Economic benefits, and standardized management of special operations personnel with certificates, and in accordance with the requirements of higher authorities, are formulated as follows.
Measures and rules and regulations:
A, special operations personnel type of work
1, electrician
2. scaffolder
3. Blaster
4. Mechanical operators (planers, circular saws, reinforcement machinery, mixers, pile drivers, etc.). )
5, electric (gas) welder
6. Assembler
7. Firefighters
8, tower crane driver
9, material hoist (gantry, derrick)
10. Service elevator (passenger and cargo elevator)
1 1, signal command
12, vehicle running in the factory (construction site)
13, crane dismantler
Second, special operations personnel should have the conditions
1, more than 18 years old, but the personnel engaged in blasting operations shall not be less than 20 years old.
2, serious and responsible work, good health, no diseases and physical defects that hinder special operations.
3. The technical business theory and practical operation skills that meet the requirements of the post have passed the examination.
Three, special operations personnel training, assessment, certification, review
1. Personnel engaged in special operations must receive strict safety technical training from relevant departments stipulated by the state, pass the examination and obtain the operation certificate before they can work independently. The training time for obtaining evidence for special operations personnel shall not be less than 80- 120 hours.
2, special operations personnel after training, examination and obtain mount guard operation certificate, study, examination and review once every two years.
3, special operations personnel (security officer) also receive targeted training and education, the time shall not be less than 30 hours.
4. Organize special operations personnel due every year to go to the designated department of the company for training and timely review.
5, according to the provisions, arrange not less than 30 hours of safety training and education plan every year, and study as planned.
Test preparation records.
Four, the establishment of special operations personnel files
1, special operations personnel roster
2, the roster must be the construction site personnel. There must be a name, issuing authority, issuing time and approver.
Time and time to do this work, etc. The remarks should also record whether the person has any safety accidents, etc.
Five, special operations personnel certificate management
Special operations personnel shall hold the post (operation) certificate of special operations personnel issued by the provincial and municipal safety supervision departments.
On duty; Original documents or copies shall be stored in a unified way for construction inspection.