The specific width is 2.5 meters from the ground, 5 meters on both sides, and the width of the car is 2. 1. That is 7. 1 meter. Subtract the distance between the car and the ground and multiply it by two. Subtract this value from 7. 1, and this is the width of the tarpaulin you need to make.
Covering method of Gaolan tarpaulin
When the vehicle is short, the surplus part of the tarpaulin can be folded under the tarpaulin near the middle two waist ropes, and the two waist ropes in the folded part are diagonally tightened and fastened. Tighten the corner rope of the tarpaulin to make the corner of the tarpaulin expand inward into a triangle, flatten both sides of the corner and fold it to the end wall of the truck, and tightly wrap the corner at both ends of the vehicle so that the pressure rope can hold the corner down.
According to the basic requirements of tarpaulin, the loading height of goods exceeds 1m above the end wall, or the open car with escort is not allowed to be covered with tarpaulin. Tarpaulin and tarpaulin rope net shall not be used as goods reinforcement materials. Goods that need reinforcement must be bundled and reinforced before tarpaulin covering. There are no old rope ends, iron wires and other wastes left on the truck ropes.
When the loading height of the goods is lower than the side wall of the vehicle, a tarpaulin bracket can be placed, and anti-wear measures should be taken at the contact between the protruding part of the bracket and the tarpaulin. Before covering, the quality inspection cloth body is complete, without damage, the eye socket is intact, and the marks and numbers are complete and clear. The rope is complete, complete, without joints, firmly inserted and correctly connected with the tarpaulin.