1991April officially joined ean international;

1991June, the national bar code quality supervision and inspection center was established;

1991may, the first batch of five national bar code standards were issued and implemented;

The first POS system in China was developed in June, 1992.

1992 1 1 China bar code and technology application association was established;

1992165438+10, the key project of the former state science and technology commission "development of bar code system" passed the appraisal;

In March, 1993, the bar code and information system was established;

In April, 1994 hosted a meeting of heads of EAN coding organizations in the Asia-Pacific region in Beijing;

1April, 1994, hosted the first international automatic identification technology exhibition (scan-China);

1994 10 the national bar code quality supervision and inspection center conducted the first national bar code quality supervision and spot check;

1August, 1995, the electronic data interchange standard EANCOM in circulation field was officially released;

1April, 1997, undertaking the key project of the Ninth Five-Year Plan of the State Science and Technology Commission "Two-dimensional Bar Code Technology Research and Application Pilot";

1July, 1997, the National Bar Code Quality Supervision and Inspection Center passed the acceptance of the former State Bureau of Technical Supervision and obtained the authorization certificate of People's Republic of China (PRC) National Quality Supervision and Inspection Center.

1September 1997 was approved by the former state science and technology commission as the supporting unit of the national key promotion plan of scientific and technological achievements;

1997 12. The scientific research project "Business EDI Research" undertaken by the former State Bureau of Quality and Technical Supervision passed the appraisal;

1998 0 1 undertook the ninth five-year plan key project of the former state science and technology commission "research and development of EDI comprehensive application demonstration system in typical cities";

July 1998 The former State Bureau of Quality and Technical Supervision promulgated the Measures for the Administration of Commodity Barcodes;

1August, 998, the national standard of commodity bar code was revised;

1February, 1999, Vice Premier Wu Bangguo instructed: actively promote QR code technology on a pilot basis;

In May 2000, he presided over the 2000 EAN Plenary Session in Beijing.

In July 2000, the bar code printing qualification was officially launched;

200 1 China ECR Committee was established;

2001September China Automatic Identification Technology Association was established;

200165438+February undertook the key project of the Ministry of Science and Technology "Research on Key Standards of Logistics Distribution System";

In April 2002, the center website was officially opened;

In July 2002, the Subcommittee on Automatic Identification and Data Acquisition of China Information Technology Standardization Technical Committee was established;

From June 5, 2002 to 10, the magazine Automatic Identification Technology and Application was published.

In May 2003, the networking project of national bar code working institutions was completed;

In June 2003, signed an agreement with ean international on the promotion and application of the global product classification scheme in China;

In July 2003, the General Administration of Quality Supervision, Inspection and Quarantine issued a document, and the "China Bar Code Promotion Project" was officially launched;

In August 2003, the National Technical Committee for Standardization of Logistics Information Management was established.

From June 5438 to 10, 2003, the National Bar Code Quality Supervision and Inspection Center was recognized by the National Accreditation Committee of China Laboratory.

From June, 5438 to February, 2003, it signed the Maintenance Agreement for Chinese Version of UN Standard Product and Service Code (UNSPSC) with the Uniform Code Committee of the United States;

The research project "Global Electronic Product Code (EPC)" was launched in June 5438+February 2003.

In February 2004, the official website of China product electronic code was officially opened;

In April 2004, EPC Global China-Global Product Electronic Coding China Management Center was established;

In April, 2004, the first training session of EPCglobal's Global Tour in Asia Pacific was held in Beijing.

In April 2004, the first high-level seminar on product electronic code and Internet of Things was held in Beijing.

In April 2004, EPC and Internet of Things, the first domestic book on product electronic coding, was officially published.

In May, 2004, the National Bar Code Quality Supervision and Inspection Center was specially authorized by the Bar Code Measurement and Verification Agency of the General Administration of Quality Supervision, Inspection and Quarantine.

In June 2004, the Chinese version of UN Standard Product and Service Code (UNSPSC) was released;

In July 2004, the website of China Management Center of United Nations Standard Product and Service Code (UNSPSC) was opened, and applications for membership registration were accepted.

In August 2004, China logistics information standard system table was released;

On June 5438- 10, 2004, the registration management of product electronic codes in China District was officially launched, and Beijing Oriental Li Ge Technology Co., Ltd. became the first member of EPCglobal China District.

From June 5 to 10, 2004, Miguel Lopera, CEO of ean international, and chris adcock, the new chairman of EPCglobal, visited China for the first time.

In June 2004, 165438+ 10, we jointly put forward the initiative of "actively adopting commodity bar codes to promote the rapid development of China's building materials industry", and the promotion and application of EAN UCC system in the building materials industry was fully launched.

From June, 5438 to February, 2004, we jointly issued the Notice on the Adjustment Scheme for the Use of Commodity Barcodes by Cigarette Production Enterprises with the Department of Science, Technology and Education of the State Tobacco Monopoly Bureau, and the barcode registration of cigarette enterprises in China was restarted according to the new scheme.

From June 5438 to February 2004, the National Bar Code Quality Supervision and Inspection Center completed the national supervision and spot check of the product quality of AQSIQ, and the qualified rate reached 73%.

0 1, 2005 ean international advisory Committee meeting was held in Beijing;

In April 2005, the first meeting of the working group on the application and promotion of bar codes in clothing industry was held in Guangdong.

In May, 2005, the first meeting of the national standard drafting working group of "Bar Code Identification and Coding of Automobile Parts" (tentative name) was held in Beijing.

In June, 2005, the management committee meeting of EPCglobal was held in Beijing. At the same time, the Third China International High-level Forum on Product Electronic Codes and RFID, the round table meeting between EPCglobal Management Committee and China institutions and enterprises and the media meeting were held, which promoted the promotion of product electronic codes in China.

On June 5438+ 10, 2005, the awarding ceremony of the first batch of EPCglobal China system members and the seminar on EPC technology application were held in Beijing. Dongfang Science and Technology Co., Ltd., Beijing Tsinghua Tongfang Microelectronics Co., Ltd., China Internet Information Center, Shandong Institute of Standardization and Beijing Futianda Electronic Integration Technology Co., Ltd., as the first batch of senior members of EPCglobal China, accepted the certificates issued by Qi, deputy director of the National Standardization Administration Committee and president of China Institute of Standardization.

From June 5, 2005 to 10, the theme of Barcode Technology Publicity Week was "Disseminating the newly revised Measures for the Administration of Commodity Barcodes", assisting the Regulation Department of AQSIQ to hold a press conference and organizing national coding workers and quality supervision workers to carry out study and publicity work.

From June 5438 to 10, 2006, Director Liu Pingjun of the National Standardization Administration Committee met with the head of the Global Product Electronic Code Management Center (EPCglobal), and the two sides had extensive and in-depth exchanges on EPC standards, frequency, application and promotion.

From 3 to 7 February 2006, the 2006 ean International Forum was held in the Belgian capital. The Center participates in various ways of communication to improve the right to speak internationally.

On April 5-6, 2006, the third seminar on product information registration system was successfully held in Beijing. The product information registration system has more than 50,000 enterprises and more than 650,000 product data.

In May, 2006, Zhang Chenghai, director of China Commodity Coding Center, was invited to attend the MBA academic forum held in Beijing Jiaotong University and gave a lecture on "National Commodity Coding and Labeling System" to the teachers and students attending the meeting.

May 2006 The 2006 plenary session of ean International (GS1) was held in Malta on May 6-6, 2006. At the meeting, the representative of China Article Coding Center introduced the first domestic GS 1 system solution applied to beef tracking, which was widely concerned and praised, and won the fifth anniversary medal of joining GS 1 15.

In June 2006, the "Commercial Vehicle Export" Forum was held in Beijing. In order to promote the application of automatic identification technology in automobile industry, the standard "Coding and Bar Code Marking of Global Uniform Identification System for Automobile Parts" was interpreted at the meeting.

In July 2006, the inaugural meeting of the National Technical Committee for Standardization of Commodity Codes was held in Beijing. The Committee consists of 465,438+0 members, and its secretariat is located in China Article Numbering Center.

In July 2006, the 2006 China ECR Conference was held in Beijing on July 19-20, with the theme of "ECR Promoting Supply Chain Innovation in China".

In August 2006, China Automatic Identification Technology Association published the first issue of Automatic Identification Technology in China. By the end of 2006, three issues had been published.

On September 20th, 2006, the 11th Five-Year Planning Seminar of China Article Coding Center was held in Beijing. Zhang Chenghai, director of the center, introduced the main contents of the 11th Five-Year Plan in detail, and the participants had a heated discussion about it.

On June 5 5- 10/October, 2006, Vietnam Coding Association (GS 1 Vietnam) paid an exchange visit to China Article Coding Center and its branches. The two sides introduced the development status, work priorities and staffing of coding institutions in the two countries respectively, and discussed some hot issues such as bar code, product electronic coding, traceability and GDSN.

In 2006, the 9th ECR Asia Conference was held in Kuala Lumpur, Malaysia from 1 13 to 16. On the first day of the conference, China Article Coding Center successfully delivered an English speech entitled "The first beef traceability with GS 1 system in China", which won unanimous praise from the delegates and expanded its international influence.

In 2006, the113rd international automatic identification technology exhibition was held in Beijing on June165438+1October 2 1. At the same time, the exhibition also held the "2006RFID Technology Application Forum" and the China automatic identification industry new technology and new product launch conference.

On June 5438+065438+ 10, 2006, "2006 Barcode Technology Publicity Week" kicked off on 10. The theme of this publicity week is to improve the quality of commodity barcodes, and to ensure the high quality of barcodes and the vital interests of barcode application enterprises and the public in the critical year of the project's transition from take-off to maturity.

In 2006,1114, China barcode promotion project-"pollution-free farming and meat products EAN? The UCC radio frequency management system passed the acceptance of experts in Kunming, achieving a zero breakthrough in the application of EAN UCC radio frequency management system in aquaculture in China, and taking a solid step towards the successful completion of the project objectives.

June 2006165438+1October 65438+1October 65438+1October 065438+1October 00. Shanghai Drug Administration clearly requires that domestic implantable medical devices sold in Shanghai must adopt EAN UCC system.

In 2006, ean International (GS 1) Asia-Pacific Forum was held in Indonesia. China Article Coding Center introduced the implementation progress and pilot situation of GDSN in China to the representatives of 16 countries (regions), which enhanced international exchanges.

From 65438+February165438+1October 30-65438+February 2, 2006, China Article Coding Center held a national bar code inspector training course in Hefei, Anhui Province, which laid a solid talent foundation for the further popularization and application of bar code technology in China.

On June 5438+February, 2006, China Automatic Identification Technology Association held the third meeting of the second session, and released nine association standards and two research reports, which were implemented on June 5438+ 10, 2007.

From June 5th to1October 5th, 2007, he sent a delegation to accompany the representative of the International Department of the General Administration of Quality Supervision, Inspection and Quarantine to the headquarters of ean international.

On June 5438+ 10, 2007, the scientific research project of AQSIQ "Research on China Product Electronic Code System" was completed.

On June 5438+ 10, 2007, the logistics department of the Armed Police Headquarters was organized to form a delegation to visit Singapore to investigate the local police logistics and coding application.

In February 2007, he sent a delegation to Belgium to participate in the Global ean International Forum.

In February 2007, the draft of the national standard "EPC data coding structure" was completed.

In March 2007, the 2007 national conference on article coding was held in Nanchang.

In March 2007, Director Zhang Chenghai of Coding Center went to Canada to attend the meeting of ean International Advisory Committee.

In March 2007, he edited and published Logistics Standardization.

In April, 2007, China introduced UHF RFID product electronic coding.

In April 2007, the 3rd1Asia-Pacific ECR Executive Committee Meeting was held in Beijing.

In April, 2007, China Bar Code Promotion Project "Application of ANCC System in Medical Device Supervision" and other projects were accepted.

In May 2007, ean international (GS 1) Asia-Pacific DataBar training was held in Beijing.

In May, 2007, "Automatic Identification Technology and Application Seminar and the 11th National Bar Code Technology and Application Teacher Training" was held in Beijing.

In May 2007, an Introduction to Automatic Identification Technology was published.

In May 2007, he sent a delegation to South Korea to attend the 2007 ean International Plenary Meeting.

In May, 2007, he sent staff to attend the Singapore EPCglobal/RFID Forum and delivered a keynote speech entitled "Application of EPC in China".

In June, 2007, the "First National Service Conference of Article Coding Branches" was held in Jinan.

In July, 2007, in cooperation with the national bicycle special rectification work, the bicycle coding scheme was studied and formulated, the national bicycle enterprise coding registration information management system was developed, and a special website was established.

In July 2007, assisted in the development and completion of the logistics materials cataloging system of the Armed Police Force.

In July 2007, the standard of Location Coding and Barcode Representation of Commodity Barcode Participants was issued.

In July, 2007, the "Sand Table Model in the Application Field of Item Coding" appeared in the "Video Exhibition" of Quality Inspection Results of AQSIQ.

In July 2007, Two-dimensional Bar Code Technology and Application was published.

In August 2007, the national standard GB/T 2 1049 Hanxin Code was officially released.

In August, 2007, we completed the acceptance of China barcode promotion project "Application of GS 1 System in Drug Price Supervision and Medical Insurance Settlement System", "Barcode Management Information System for Drug Retail Enterprises (GSP, POS, MIS System)" and "Quality Investigation and Quality Solution for Weak Links in Barcode Printing".

In September 2007, the first batch was approved by MET RFID testing laboratory through international authoritative evaluation.

In September 2007, he sent staff to Japan to participate in the Asia-Pacific automatic identification technology exhibition.

In September, 2007, China barcode promotion project "China commodity and participant data service system construction" and other projects completed the acceptance.

The 14th International Automatic Identification Technology Exhibition was held in Shanghai from June 5th to 10, 2007.

From June 5th to1October 5th, 2007, the press conference of Hanxin Code National Standard was held.

In June 2007, Haier Group was promoted to join the EPCglobal Management Committee.

On June 5438+ 10, 2007, the Framework of National Article Coding System and the Provisions on the Management of Article Coding were issued.

On June 5438+ 10, 2007, the China Bar Code Promotion Project "Adaptability Measurement and Analysis of Bar Code Symbols Printed on Plastic Film" passed the acceptance.

In June 2007, 5438+ 10, the technology and application of electronic data interchange was published.

In June, 2007, 165438+ 10, "National Branch Teacher Qualification Training" was held in Beijing.

On June+10, 2007, the first board meeting of China ECR was held in Beijing.

In June 2007, he sent staff to Vietnam to attend the ean International Asia-Pacific Forum.

In June, 2007, 165438+ 10, the unveiling ceremony of "Bar Code Laboratory Demonstration Base of Zhengzhou Railway Vocational and Technical College, China Bar Code Promotion Project" was held in Henan.

On June 5th+February 5th, 2007, China GDSN database passed the global certification.

On June 5, 2007+February, the draft national standard of EPC information service was completed.

On June 5438+February, 2007, three association specifications were issued, namely, General Technical Specification for Bar Code Printers, General Technical Specification for Active Radio Frequency Labels and General Technical Specification for Semi-Passive Radio Frequency Labels.

On June 65438+February, 2007, the Key Standards and Application Demonstration Research of Basic Data Platform of China Commercial Circulation Collaborative Operation System was released.

On June 5438+February, 2007, the China barcode promotion project "Research on the Model of Public Logistics Data Management Platform" passed the acceptance.

On June 5438+February, 2007, the unveiling ceremony of "China Bar Code Promotion Project Bar Code Laboratory Demonstration Base of Beijing Youth University for Politics" was held in Beijing.

On June 5th, 2007+February 5th, 2007, the work summary meeting of China Article Coding Center in 2007 was held.

On June 5438+ 10, 2008, the selection results of the paper collection activity of China Bar Code Technology and Application Association were announced.

On June 5438+ 10, 2008, China barcode promotion project "Promotion and application of ANCC system in furniture industry" passed the acceptance.

In February, 2008, China barcode promotion project "Application of GS 1 system in the traceability of Chinese herbal medicine planting" passed the acceptance.

In March 2008, the 2008 national conference on article coding was successfully held in Shenyang.

In March 2008, China Article Numbering Center went to Belgium to attend the 2008 Global ean International Forum.

In March 2008, China barcode promotion project "Promotion and application of ANCC system in clothing field" and "Application of ANCC system in medical device product tracking" passed the acceptance.

In March, 2008, China barcode promotion project "Research on the Application of Coding and Labeling of Blood and Blood Products" passed the acceptance.

In April, 2008, China Automatic Identification Technology Association held its second meeting, and formulated two national standard topics: General Technical Specification for RF Readers (Series) and General Technical Specification for RF Labels (Series).

In April, 2008, the commendation and exchange meeting of excellent papers on barcode technology and application was held in Beijing.

In May, 2008, the Coding Center made arrangements for Wenchuan earthquake relief work for the first time, and organized many donations, materials and caring activities.

In May 2008, Zhang Chenghai, director of Coding Center, attended the 2008 ean International Plenary Session held in Croatia.

In June 2008, industrial and commercial cooperation created value-2008 China ECR Conference was successfully held in Beijing.

In June, 2008, the thirteenth national training course for teachers of bar code automatic identification technology in colleges and universities was successfully concluded.

In July 2008, the second phase summary meeting of EPCglobal TLS pilot project was held in Beijing.

In July 2008, the 2008 Standing Council of China Automatic Identification Technology Association was held.

In July 2008, the coding center sent personnel to attend the Asia-Pacific Conference 1 1 ECR held in Thailand.

In September 2008, the "First Bar Code Training Course for Local Employees" sponsored by the Coding Center was successfully held in Qingdao from September 23 to 25.

In September 2008, China barcode promotion project "Application of GS 1 System in Drug Price Supervision and Medical Insurance Settlement System" passed the acceptance.

The 15th International Exhibition of Automatic Identification Technology was held on June 5438+ 10, 2008. At the same time, a series of activities were held, such as "2008 Automatic Identification Industry and New Products and Technologies Release Conference", "2008 China Automatic Identification Industry Development Summit" and "15th Anniversary Series Event Site", which strengthened the in-depth communication and interaction among enterprises, users and audiences.

On June 5438+ 10, 2008, China barcode promotion project "Guangxi Rice Noodle Quality and Safety Tracking Supervision System" passed the acceptance.

In June, 2008, the director of the National Standards Committee inspected the work of the coding center.

In June 2008, China commodity information service platform V2.0 was officially launched, and a training meeting on China commodity information service platform was held in Beijing.

On June 5438+065438+ 10, 2008, Director Zhang Chenghai of Coding Center met with the Chief Operating Officer of ean international.

In 2008, 165438+2008 10, the teacher qualification training and certification activity of China Article Coding Center was successfully concluded.

On June 5438+February, 2008, the new website of China Article Coding Center was launched.

On June 5th, 2008+February 5th, 2008, the work summary meeting of China Article Coding Center in 2008 was held.

From June 5th to1October, 2009, Deputy Director Luo Qiuke of China Article Coding Center met with Mr. David Buckley, a senior expert from ean international.

In February 2009, the 2009 national conference on article coding was held in Changsha.

In February 2009, Director Ji of the National Standards Committee met with Mr. Miguel Lopear, Mr. Vicente Escribano, CEO of ean international (GS 1), Director Shi Baoquan of the National Standards Committee, Liu of the Second Industry Department, Ms. Chen Ying of the International Department, Director Zhang Chenghai of the China Article Coding Center, Director of the Promotion Department, Director of the Management Department and Deputy Director Kong Hongliang of the Promotion Department.

In February, 2009, Hanxin Code "Method of transforming two-dimensional bar code symbols into coded information" was granted a patent.

In March, 2009, the 2009 National Service Conference of Article Coding Institutions and the Exchange Meeting of Barcode and Information System Magazine was held.

In March, 2009, "20 Years Achievement Exhibition and Commendation Conference of China Article Coding" was held in Beijing.

In March 2009, the National Science and Technology Support Plan "Implementation Plan of Modern Logistics Standards" was completed in the 11th Five-Year Plan.

In April, 2009, the promotion staff of China Article Coding Center went to Tianjin, Ningbo and Shanghai to investigate the standardization of logistics information.

In April 2009, the medical industry promotion website of China Article Coding Center was launched.

In April 2009, the "Quality and Safety Year" inspection team went to the coding center to supervise the work.

In April 2009, the "National Bar Code Quality Work Conference" was held in Chongqing.

In May 2009, Mr. Ian Robertson, an expert from EPCglobal, visited the China Article Numbering Center.

In May 2009, China Article Numbering Center sent staff to Santiago, Chile to attend the 2009 GS 1 Plenary Session.

In May 2009, 15 National Bar Code Teacher Training Course was successfully completed.

In May 2009, the final of the 2009 National Barcode Competition for College Students was held in Beijing.

In May 2009, the popular science reading book Frequently Asked Questions was published.

In June, 2009, "Training Meeting on Management Information System of China Article Coding Center" was held in Hebei.

In June 2009, China Bar Code Technology and Application Association conducted an investigation on the application of commodity bar codes in building materials supermarkets.

In June 2009, the patents of Hanxin Code "2D barcode symbol generation method" and "2D barcode graphic distortion correction method" were authorized.

In July, 2009, the Guide to the Application of Barcode for Medical and Health Products was compiled and published.

In July, 2009, The Case Collection of China Barcode Promotion Project was compiled and published.

In July 2009, the research task and audit report of the EU project "Building Radio Frequency Identification Solution for Global Environment" (referred to as BRIDGE) were completed.

In August 2009, China Article Coding Center and China Automatic Identification Technology Association successfully held the 16th International Automatic Identification Technology Exhibition with the theme of "Quality, Safety and Service Innovation".

In August 2009, a publicity week was held with the theme of "paying attention to the quality of commodity coding and promoting the application of commodity bar code technology", including the 2009 product quality and safety traceability forum, the theme seminar on "the quality of commodity bar code application", the theme exhibition area of "quality and safety year" and the supermarket commodity bar code detection activities.

In August 2009, the seminar on synchronous development of commodity information and the summary report of P&G data synchronization project were successfully held.

In September 2009, the patent of bar code reading equipment detection device was authorized.

On June 5438+ 10, 2009, AQSIQ and CNCA officially authorized the establishment of the National Quality Supervision and Inspection Center for RFID products, which became the most comprehensive and powerful national quality inspection center in China.

On June 5438+ 10, 2009, the national standard "Rules for Electronic Coding of Articles Based on Radio Frequency Identification of Trade Items" was approved.

On June 5438+ 10, 2009, the guide to the application of commodity bar code in building materials industry was compiled and published.

On June 5438- 10, 2009, the teacher qualification training certification of China Article Coding Center was successfully completed.

The first application conference of China Commodity Information Service Platform (Chengdu) was successfully held in June 2009.

On June 5438- 10, 2009, China Bar Code Technology and Application Association organized technical extension personnel to go to Yanjing Beer Base for investigation.

In 2009 165438+20091October, the board of directors of China ECR was successfully held in Nanjing.

From June, 5438 to February, 2009, two national standards, Code for Performance Testing of Bar Code Readers and Digital Bar Code Making and Performance Testing, passed the examination and approval of experts.

From June, 5438 to February, 2009, the national quality inspection public welfare scientific research project "Research on the Standardization of National Article Codes" was completed and entered the project acceptance stage.

From June, 5438 to February, 2009, the research work of the project "Research on the national standard system of article identification network" was completed, and it passed the project acceptance organized by China National Institute of Standardization.

From June, 5438 to February, 2009, two national standards related to food safety traceability were formulated, namely, Coding and Identification Code of Food Traceability Information and General Code of Food Traceability.

On June 5438+February, 2009, the compilation and publication of the Guide to the Classification and Coding of Logistics Services and the Development of Logistics Management Information System was completed.

From June 5 to February 2009, the work summary meeting of China Article Coding Center was successfully held.