1992 has been rated as one of the top ten outstanding young people in Shenyang, a model of young teachers in Shenyang and an outstanding young scientific and technological worker in Liaoning province.
1994 was rated as the national youth science and technology model;
1995 won the first prize of scientific and technological progress in Liaoning province.
In 2003, "Research on dynamic simulation, monitoring and prediction of supporting pressure and deformation of soft rock roadway" won the second prize of Liaoning Province for scientific and technological progress;
In 2004, "Reconfigurable Manufacturing Process Management System" won the third prize of scientific and technological progress in Liaoning Province.
In 2005, "Reconfigurable Manufacturing Process Management System" won the third prize of scientific and technological progress in Liaoning Province.
In 2006, he won the "Excellent Project Award" from the Department of Materials and Engineering of the National Natural Science Foundation of China.
In 2005, he won the second prize of national teaching achievement. Reliability and safety design of electromechanical system, Harbin Institute of Technology Press, 2006/09/0 1.
Guide to Qualification Examination for Trainee Mechanical Design Engineers (Training Textbook for Qualification Examination for Trainee Mechanical Design Engineers), Mechanical Industry Press, 2007-03-0/,1 edition.
Basic theory and method of mechanical reliability, Science Press, 2009+0.
Finite element method and its application in structural analysis, Northeastern University Press, 2000,65438+February.
Modern Mechanical Design Methods (training textbook for qualification examination of trainee mechanical design engineers), Mechanical Industry Press, May 2005.
Control chart technology in advanced manufacturing environment, northeastern university press, 2007- 12- 1.
China Material Engineering Grand Ceremony, Volume 1, Fundamentals of Material Engineering (Chapter 6), Chemical Industry Press, 2006-1-.
Brief introduction of modern mechanical design methods
This book is written by China Mechanical Engineering Society according to the regulations and requirements of Qualification Certification Rules for Trainee Mechanical Design Engineers. Its purpose is to improve the adaptability of college students and meet the urgent needs of employers for talents. The compilation of this book fully considers the foundation and actual needs of engineering majors, with comprehensive content, clear system and emphasis on practical demonstration. This book includes four parts: innovative design -TRIZ theory, finite element method and ANSYS application, optimization design and reliability design. This book basically includes the knowledge of modern design theory that engineers and technicians need to master, and strives for concise content.
This book is mainly used as a teaching material for graduates and students majoring in mechanical engineering in colleges and universities to participate in the qualification examination of trainee mechanical design engineers, and can also be used as a reference for relevant engineering and technical personnel.
Brief introduction of basic theory and method of mechanical reliability
Based on the reliability of mechanical systems and their components, Basic Theories and Methods of Mechanical Reliability collects the latest research results at home and abroad, and introduces the new understanding and development of basic reliability theories, models and methods such as the relationship between reliability and product life cycle cost, the relationship between failure rate and time, the relationship between load and intensity interference, and the relationship between system reliability and component reliability. In the reliability of parts, the concept and model of load intensity interference are explained in the general sense of mathematics, which greatly expands the application scope of traditional models. In the aspect of system reliability, the method of reliability analysis and modeling directly at the system level is introduced by using the thinking method of system engineering, which breaks through the traditional reliability analysis framework of "from component to system". In the aspect of system fault analysis, Petri net model and corresponding new fault analysis method are introduced. In addition, the reliability of multi-state parts and systems is described in detail by using the general generating function method.
Basic Theory and Method of Mechanical Reliability can be used as a teaching material for graduate students majoring in mechanical engineering, mechanical design, manufacturing and automation in colleges and universities, and also as a reference material for researchers engaged in reliability research. The paper published in 2009 is Stewart-type parallel bed attitude equation and inverse kinematics solution based on D-H transformation matrix, mechanical design, No.5, 2009.
A new six-degree-of-freedom mechanical loading system, modular machine tools and automatic machining technology, No.4, 2009
Structural strength and stability analysis of large vacuum tank, mechanical design and manufacture, No.4, 2009
Linearization calculation model and verification of attitude error of six-degree-of-freedom parallel machine tool, manufacturing automation, No.2, 2009
Reliability modeling and evaluation of polymorphic systems based on Bayesian networks, Journal of Mechanical Engineering, No.2, 2009.
Research and application of fatigue notch coefficient considering surface machining, modular machine tools and automatic machining technology, No.2, 2009
Finite element analysis of stress intensity factor of porous MSD in finite plate, modular machine tool and automatic machining technology,No. 1, 2009.
Fatigue cumulative damage reliability model of parallel load system * * *, Journal of Northeastern University: Natural Science Edition, No.2, 2009
Identification of sucker rod defects based on hybrid features and support vector machine, Journal of Northeastern University: Natural Science Edition, No.2, 2009
Microstructure analysis of friction stir welding seam of 5mm thick 6063 aluminum alloy, tensile test analysis of friction stir welding parts based on ARAMIS in welding technology,No. 1, 2009, No.6, 2008.
Calculation model of gear reliability considering load times, Journal of Northeastern University: Natural Science Edition,No. 12, 2008.
Determination method and reliability calculation of continuous system strength distribution, Journal of Northeastern University: Natural Science Edition,No. 12, 2008.
Numerical simulation of roll bending of ERW welded pipe based on mixed hardening model, Journal of Plastic Engineering, No.6, 2008
Finite element analysis and design of notched specimen of 35CrMo steel, mechanical design,No. 1 1, 2008.
Bayesian network evaluation method for system reliability, Journal of Aeronautics, No.6, 2008
Discrete modeling method for reliability of multi-state mechanical systems, Journal of Northeastern University: Natural Science Edition,No. 1 1, 2008.
Reliability analysis of cable-related failure system, Journal of Northeastern University: Natural Science Edition,No. 1 1, 2008.
Failure mechanism and quantitative analysis of polymorphic systems, Journal of Mechanical Engineering, 10, 2008.
Finite element analysis method of belt conveyor drum based on dynamic nonlinear model, coal mining machinery 1 1, 2008.
Dimensionless interference analysis method for fatigue reliability of uncertain constant amplitude cyclic load, mechanical strength, No.5, 2008
Research on reliability analysis method of continuous system, mechanical manufacturing, No.9, 2008
Dynamic reliability model of system considering failure correlation, Journal of Military Engineering, No.8, 2008
Reliability analysis of related faults of parallel system based on damage equivalence principle, Journal of Northeastern University: Natural Science Edition, No.8, 2008
Non-empirical model of system failure probability analysis, China Mechanical Engineering,No. 15, 2008.
Dynamic reliability modeling and failure rate research of failure-related systems, China Mechanical Engineering,No. 12, 2008.
Dynamic simulation of temperature field in friction stir welding process, Journal of Northeastern University: Natural Science Edition, No.7, 2008
Research on multi-task reliability of manufacturing system based on ESPN, Journal of Northeastern University: Natural Science Edition, No.7, 2008
Accuracy Analysis and Simulation of 3-TPT Parallel Machine Tool, China Mechanical Engineering,No. 1 1, 2008.
Dynamic reliability model of k/n system considering failure correlation, Journal of Mechanical Engineering, No.6, 2008
Hole and groove analysis in friction stir welding seam of 2A 12 aluminum alloy, light alloy processing technology, No.5, 2008.
Reliability analysis of load-related structural systems, Journal of Mechanical Engineering, No.5, 2008
Finite Element Model for Dynamic Simulation of Cracked Beams, Journal of Northeastern University: Natural Science Edition, No.5, 2008
A new method for finding the minimum cut set by using Petri net incidence matrix, mechanical engineering, 9 th issue, 2008.
Research on CAD/CAE integrated modeling method of ERW roll bending process, mechanical design and research, No.2, 2008
* * * Processing method of uncertain data in failure analysis, mechanical design,No. z 1, 2004.
Optimization of flexible job shop scheduling based on production cost, Journal of Northeastern University: Natural Science Edition, No.4, 2008
Application of Bayesian Network in Reliability Evaluation of Mechanical System, Journal of Northeastern University: Natural Science Edition, No.4, 2008
Research on multi-objective scheduling optimization of flexible job shop, Journal of Northeastern University: Natural Science Edition, No.3, 2008
Research on friction stir welding technology and mechanism, modern manufacturing technology and equipment, 1, 2008.
Reliability Modeling of Pipeline System Considering Related Failure, China Mechanical Engineering, No.5, 2008.
Identification of sucker rod defects based on wavelet neural network, Journal of Northeastern University: Natural Science Edition, No.2, 2008
Soluble treatment of excess sludge based on high-speed turntable method, Journal of Chemical Technology, No.2, 2008
Defect analysis in friction stir welding of aluminum alloy, mechanical manufacturing, No.2, 2008
* * * Dynamic Reliability Model of Failure System, China Mechanical Engineering,No. 1, 2008.
Reliability model of parts considering loading times, mechanical strength,No. 1, 2008.
Friction stir welding technology and microstructure analysis of 2A 12 aluminum alloy, manufacturing technology and machine tools,No. 1, 2008.
Safety analysis of complex mechanical structure based on artificial neural network, electromechanical, 1, 2008.
Dimensionless interference model of fatigue reliability under random constant amplitude cyclic load, Journal of Mechanical Engineering,No. 1, 2008.
A new model of buried fault evaluation based on RCM and CCF theory, Journal of Northeastern University: Natural Science Edition,No. 1, 2008.
Reliability modeling method of pipeline continuous system, Journal of Northeastern University: Natural Science Edition,No. 1, 2008, Dynamic reliability model of parts under random load, Journal of Mechanical Engineering,No. 12, 2007.
Application of ANSYS Grid Division in Engineering Examples, No.9 of Machinery in 2007.
Mathematical model for failure rate prediction of mechanical products, failure analysis and prevention, No.4, 2007.
Study on dynamic reliability model and failure rate of mechanical parts, Journal of Northeastern University: Natural Science Edition,No. 1 1, 2007.
Dynamic reliability modeling and early failure rate of parts, Journal of Aeronautics, No.6, 2007
Research on multi-task reliability of CIMS based on generalized stochastic Petri net, computer engineering and application, No.33, 2007
Real-time monitoring of acoustic emission in aircraft horizontal tail fatigue test, Journal of Northeastern University: Natural Science Edition, No.8, 2007
Monte Carlo Simulation of 3-TPT Platform Error, Journal of Engineering Design, No.4, 2007
Software development and engineering application based on small sample reliability evaluation method, Journal of shenyang jianzhu university: Natural Science Edition, No.4, 2007.
Reliability model of * * * failed parts considering load times, Mechanical Science and Technology (Xi 'an),No. 10, 2007.
Application of ARMA Control Chart to Performance Analysis of IID Variables, Journal of China Scientific Instruments,No. 10, 2007.
Analysis of invalid crack position of one-dimensional Euler beam with cracks, Journal of Applied Mechanics, 1, 2007
Information Loss in Failure Probability Calculation and System-level Modeling, China Mechanical Engineering,No. 19, 2007.
Dynamic reliability model of mechanical parts under various failure modes, China Mechanical EngineeringNo. 18, 2007.
Application of signal-to-noise ratio in analyzing the detection ability of residual control chart, No.5, Industrial Engineering, 2007
A new method to improve the accuracy and sensitivity of magnetic flux leakage testing for micro-cracks in sucker rods, Petroleum Machinery, No.9, 2007
Development of Gear Parametric Design System Based on Pro/E, Coal Mining Machinery,No. 10, 2007.
Reliability model of failure system under multiple loads, Journal of Aeronautics B08, 2007.
Process control method of integrating SPO and EPO, Journal of Northeastern University: Natural Science Edition, No.9, 2007
Fault analysis of basic machining unit based on stochastic Petri net, modular machine tools and automatic machining technology, No.9, 2007
Solving hidden failure rate by neural network, mechanical manufacturing, No.6, 2007
Sensitivity analysis of Q control chart, high-tech communication, No.2, 2007
Monitoring tool wear process with MCEWMA control chart, Journal of Northeastern University: Natural Science Edition, No.5, 2007
Reliability model of failure-related system considering loading times, Journal of Northeastern University: Natural Science Edition, No.5, 2007
Application of COM technology in reliability design, modular machine tools and automatic processing technology, no.4, 2007.
Analysis of axial deviation of straight bus tapered metal V-belt CVT belt, China Mechanical Engineering, No.8, 2007.
Autocorrelation control chart based on Bayesian dynamic model, Journal of Beihang University, No.3, 2007.
Study on life prediction method of high temperature and high pressure steam pipeline, 3 rd issue of mechanical manufacturing in 2007.
Dynamic optimal scheduling of dual-resource JSP based on Petri net and GASA, Journal of Northeastern University: Natural Science Edition, No.3, 2007
Analysis of detection ability of residual control chart in mean change in monitoring process, Journal of Northeastern University: Natural Science Edition, No.3, 2007
Theory and method of engine wheel simulation technology, Mechanical Design, No.2, 2007
Determining the applicable conditions of the mathematical model of the optimal maintenance interval in RCM, Mechanical Design, No.2, 2007.
Research on scheduling problem of dual-resource production workshop, computer engineering and application, No.6, 2007
Research on the application of motor current analysis method in machine tool equipment diagnosis, Machine Tool and Hydraulic, No.3, 2007
Reliability model of mechanical parts considering failure, mechanical design, 1, 2007.
Monte Carlo numerical simulation of fatigue reliability analysis of wheel disc, Journal of System Simulation, No.2, 2007
Acoustic emission characteristics of titanium alloy during stretching, mechanical manufacturing,No. 1, 2007.
Reliability modeling and application of pipeline continuous system, mechanical design and manufacturing,No. 1, 2007.
Comprehensive statistical process monitoring and engineering process control, improvement of initial performance of Q control chart in statistics and decision 1, 2007, Journal of Engineering Design, No.5, 2006.
Theoretical research on control chart for small batch manufacturing environment, modular machine tools and automatic processing technology,No. 10, 2006
Research on statistical control method of autocorrelation process, mechanical manufacturing, No.9, 2006
Double-objective workshop scheduling optimization of production cycle and delivery date, modular machine tools and automatic processing technology, 12, 2006.
Research progress of structural dynamics method for crack detection, mechanical manufacturing,No. 12, 2006.
Experimental study on friction coefficient and transmission efficiency of metal belt CVT, mechanical design, 12, 2006
Gear reliability design calculation model, mechanical manufacturing,No. 1 1, 2006.
Management Strategy of Petroleum Equipment Based on RCM, Petroleum Machinery,No. 1 1, 2006.
Weak fault feature extraction method based on singular value decomposition method, machine tools and hydraulics, 10, 2006.
Power exponential function model for low cycle fatigue life prediction, mechanical strength, No.5, 2006
Numerical simulation analysis of fatigue reliability of compressor disk, Journal of Northeastern University: Natural Science Edition, No.9, 2006
Simulation of dynamic characteristics of beams with cracks, Journal of Engineering Design, No.4, 2006
Solving dual-resource job shop scheduling problem based on genetic tabu search algorithm, Journal of Northeastern University: Natural Science Edition, No.8, 2006
Similarity characteristics and model error analysis of cracked beams, mechanical strength, No.4, 2006
Finite element analysis of compressor stator by ANSYS software, General Machinery, No.7, 2006
Separation of fault, vibration, test and diagnosis of motor system by cyclostationary method, No.2, 2006
Sensitivity analysis of fatigue life influencing parameters of compressor disk, Journal of Northeastern University: Natural Science Edition, No.6, 2006
Virtual design of hydraulic manifold block based on SolidWorks, Journal of Northeastern University: Natural Science Edition, No.6, 2006
Establishment of power exponential function model for low cycle fatigue life prediction by power transformation method, Journal of Aeronautics, No.2, 2006
Popularization and application of reliability interference model, standardization and quality of mechanical industry, No.3, 2006
Based on idef &；; Research on modeling of production process management system based on ML, small microcomputer system, No.5, 2006.
Elastic analysis of rectangular cantilever plate, Journal of Northeastern University: Natural Science Edition, No.4, 2006
* * * Causal Failure Model Based on Conditional Failure Probability Distribution of Parts, China Mechanical Engineering, No.7, 2006
Acoustic emission monitoring of fatigue damage during the landing gear retraction test of an aircraft, nondestructive testing, No.3, 2006.
Solving job shop scheduling optimization problem based on genetic tabu search algorithm, computer application, No.4, 2006
Analysis of engine reliability and its evaluation technology, agricultural mechanization research, No.3, 2006
Discrete modeling method for system fault analysis and probability prediction, Journal of Mechanical Engineering,No. 1, 2006.
Failure probability prediction model of redundant system, Journal of Northeastern University: Natural Science Edition, No.2, 2006
System-related failure probability model based on Monte Carlo-neural network, Journal of System Simulation, No.2, 2006
Realization of parametric part reliability design on Pro/E, mechanical design,No. 1, 2006.
Correlation failure model of series system for gear failure probability analysis, failure analysis and prevention,No. 1, 2006.