Margins: 5 cm from top to bottom, 5 cm from left to right, and 5 times of line spacing.

The alignment of the paper is "alignment at both ends", which will cause inconsistent word spacing.

The citation of master's thesis should be marked according to the format of master's thesis in references. According to the national standard: GB/T77 14-20 15, when the master's degree thesis is cited, the format is: [serial number] author, title (article) [C]. Place of publication: publishing house, year of publication.

Half angle: 123abc text distance, full angle: 123, abc text distance. From the comparison, we can see that for the same numbers and letters, the spacing between full-angle and half-angle States is different (but there is no widening between Chinese characters). Even some symbols will be different.

How to solve the problem of widening the spacing of reference characters

There are two ways to solve this problem: ① In "paragraph"-"line break and page break", check "Allow western languages to line break in the middle of words". This method is not recommended. If there are English quotations, it will lead to intermittent lines in the word, and hyphens are needed.

Word spacing, adjust the red arrow part, and the blue arrow can see the effect. Put it in square brackets (only numbers are listed, and there are no words and characters such as "p" and "page"); The line in the middle of the page number range is a half-word line) and marked with superscript. The serial number of references in text form needs to be followed by page number or page number range.

Method Add carriage return after the word "algorithm" at the end of the previous line; Method to select a paragraph and set the alignment property to left alignment; Methods Select a paragraph, click the small arrow of paragraph setting to open the dialog box of paragraph attribute setting, click the tab of "Chinese Layout" and check "Allow western languages to wrap in the middle of words".

Format problem, just adjust the indentation. The solution is as follows: Select a reference and click: Format-Paragraph-Indentation and Spacing-Special Format-hanging indent -5 characters or 3 characters. The format referenced by 100 can be adjusted back.

The explanation of the large spacing between words in a line in the reference is as follows: select a font, select the document content to be adjusted, and click the font. Set the spacing. Set spacing standards and word spacing on the Advanced page, and then click OK. Successfully adjusted font spacing.

Select a reference, open the WORD document, move the mouse to select a reference below the document, click the right mouse button, and select a font. Set the spacing, pop up the window, click the "Advanced" tab, click the spacing, and select "Standard" from the drop-down list. Seeing the effect, the word spacing of the references below the document is adjusted consistently.

Words copied and pasted from references are separated.

1. The alignment of the paper is "alignment at both ends", which will cause inconsistent word spacing.

2. Method Add carriage return after the word "algorithm" at the end of the previous line; Method to select a paragraph and set the alignment property to left alignment; Methods Select a paragraph, click the small arrow of paragraph setting to open the dialog box of paragraph attribute setting, click the tab of "Chinese Layout" and check "Allow western languages to wrap in the middle of words".

3. To solve this problem, we can adopt the following solutions: manually adjust the margins: select the layout tab in the word document, click the margins button, and manually adjust the margins to meet the format requirements of references.

4. The explanation for the large space between words in references is as follows: Select a font to select the document content to be adjusted, and click the font. Set the spacing. Set spacing standards and word spacing on the Advanced page, and then click OK. Successfully adjusted font spacing.

There is a big gap between words in references.

Word spacing, adjust the red arrow part, and the blue arrow can see the effect. Put it in square brackets (only numbers are listed, and there are no words and characters such as "p" and "page"); The line in the middle of the page number range is a half-word line) and marked with superscript. The serial number of references in text form needs to be followed by page number or page number range.

This is generally because English punctuation is used, and there is no space behind it. If English punctuation is used without spaces, when there are numbers or letters before and after punctuation, it will default to a whole (such as the red part of the icon below) and will not break lines in the middle of this whole.

Method Add carriage return after the word "algorithm" at the end of the previous line; Method to select a paragraph and set the alignment property to left alignment; Methods Select a paragraph, click the small arrow of paragraph setting to open the dialog box of paragraph attribute setting, click the tab of "Chinese Layout" and check "Allow western languages to wrap in the middle of words".

Select a reference, open the WORD document, move the mouse to select a reference below the document, click the right mouse button, and select a font. Set the spacing, pop up the window, click the "Advanced" tab, click the spacing, and select "Standard" from the drop-down list. Seeing the effect, the word spacing of the references below the document is adjusted consistently.

Why does the interval suddenly increase when the number of citations exceeds 100?

1, which is caused by short indentation distance, and the solution is simple. Endnote → Edit & In word; Management → Tools → Layout, just open the hanging entrance. The reason why the space is too large is that the indentation is too small, which leads to the conflict between the reference content of the first line and the space of the serial number.

2. This situation is generally due to the use of English punctuation without spaces. If English punctuation is used without spaces, when there are numbers or letters before and after punctuation, it will default to a whole (such as the red part of the icon below) and will not break lines in the middle of this whole.

You can set your own reasons. Word spacing is particularly large. You can adjust the character spacing yourself to scale or widen it.

4. From the comparison, it can be seen that for the same number and letter, the spacing between full-width and half-width is different (but there is no widening between Chinese characters). Even some symbols will be different.

5. The format is wrong. There is a big gap between the documents exported by HowNet, which is mostly caused by the format. It is suggested that all documents exported from HowNet should be pasted with a text, and then pasted from the text.

Wps text, when you paste the URL after the first reference, the spacing between the first lines will become larger. Why? ...

Method Add carriage return after the word "algorithm" at the end of the previous line; Method to select a paragraph and set the alignment property to left alignment; Methods Select a paragraph, click the small arrow of paragraph setting to open the dialog box of paragraph attribute setting, click the tab of "Chinese Layout" and check "Allow western languages to wrap in the middle of words".

Step 1: Open the document with line spacing, and select the text area with line spacing to be adjusted. Step 2: Right-click to find "Paragraph" and find the line spacing setting in the settings window. Step 3: Set relevant line spacing values as required, and click OK. The fourth step, according to the above steps, you can set the line spacing of WPS.

Select the reference in the document, open the right mouse button menu, open the font setting window, and set the standard spacing under the Advanced tab, so that the spacing of words in the document is consistent. 1 Select a reference, open the WORD document, move the mouse to select a reference below the document, click the right mouse button, and select a font.

Take WPS20 19 as an example: select the data area, right-click "Font" to pop up the dialog box, click the character spacing, and set it in the spacing.

Ctrl+shift+M key combination calls up the setting attribute. There is a shift+ Space option in the key, and the shortcut key is only effective after the user checks → OK (or Apply). Half angle: 123abc text distance, full angle: 123, abc text distance.