[2] Zhang Shaoxiong, Yang Yonggan. Several calculation methods of longitudinal and transverse strength of oil tankers: Wuhan Shipbuilding, N 1, P4- 12, 1999: 5- 1 1.
Xiong,,, Kang, Zhao, Cao: Rigid-plastic finite element study of axisymmetric cold extrusion. Journal of Wuhan Jiaotong University, 23 (5), P567-570, 1999: 567-570.
[4] Zhang Shaoxiong, Yang Yongqian. Study on the strength of oil tanker. Journal of Wuhan Jiaotong University, 24 (1), 2000: 29-34.
[5] Zhang Shaoxiong, Chen, Sun Haihong: Numerical analysis and simulation of cold extrusion.
The seventh international symposium on structural failure and plasticity. Melbourne, Australia, 20001October: 85 1-856
[6] Zhang Shaoxiong, Sun Haihong and Chen Nianzhong. Study on dynamic response of laminated plates of high-speed ships. Wuhan Shipbuilding N N 1, 200 1:7-9+0: 7-9.
[7] Zhang Shaoxiong, Li Xueliang, Chen Youfang. Calculation of plate element stress in direct calculation of ship structural strength, Ship Engineering, 26(3), 2004: 2 1-23.
[8] Zhang Shaoxiong, Yu Youyi. Ultimate strength of concave plate under axial pressure, Journal of Wuhan University of Technology (Traffic Science Edition) 28(3), 2004: 3 15-3 17.
[9] Zhang Shaoxiong, Yang Yongqian. Application of direct calculation of structural strength of inertial release tanker, Ship and Ocean Engineering, N4, 2004: 4-6.
[10] Zhang Shaoxiong, Zeng Jinglong, Yang Yongqian. Structural strength and buckling analysis of submarine, Ship-to-Sea Engineering, N5, 2004: 13- 15.
[1 1] Zhang Shaoxiong, Chen Nanhua, Zhang Wei. Direct calculation of structural strength of 8000 t river-sea direct barge, Ship-sea Engineering, N5, 2005: 39-4 1.
[12] Zhang Shaoxiong, Yang Yongqian. Application of inertia release in direct calculation of hull structural strength, China Ship Research, N 1, 2006.
Zhang Yanhui, Zhang Shaoxiong. Direct calculation of strength of 8000 t jacking structure, China Waterway, N2, 2006: 46-47.
Kong Quan Wang Liyong, Zhang Shaoxiong. Influence of grid thickness on finite element modal analysis and calculation, Journal of Wuhan University of Technology, 28(5), 2006: 92-94.
Zhang Shaoxiong, Li, Yang Yongqian. Realization of symmetrical mapping input in calculation of hull beam profile characteristics, Journal of Wuhan University of Technology (Information and Management Engineering Edition), 28(5), 2006: 35-37.
English editor. Visualization technology of ship design (write chapter 5, > 50000 words). Harbin Institute of Technology Press, September 2003: 136- 172.
Zhang Shaoxiong, Huang. Study on calculation method of thin-walled beam profile characteristics of ship hull, China Ship Research, N2, 2006.